SR4030 THRU SR40200 R SCHOTTKY BARRIER RECTIFIER Reverse Voltage - 30 to 200 Volts Forward Current - 40.0Amperes S E M I C O N D U C T O R FEATURES TO-220AB Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Metal silicon junction ,majority carrier conduction 0.185(4.70) Guard ring for overvoltage protection Low power loss ,high efficiency 0.175(4.44) 0.161(4.10) 0.415(10.54) MAX 0.148(3.74) DIA 0.055(1.39) 0.045(1.14) High current capability ,Low forward voltage drop 0.114(2.90) 0.102(2.60) Single rectifier construction JF SR4060 High surge capability 0.145(3.68) 0.135(3.43) 0.410(10.41) For use in low voltage ,high frequency inverters, 0.390(9.91) PIN 1 2 3 free wheeling ,and polarity protection applications High temperature soldering guaranteed:260 C/10 seconds, 0.25"(6.35mm)from case 0.635(16.13) 0.380(8.89) 0.625(15.87) 0.330(8.38) 0.159(4.05) 1.161(29.50) 0.138(3.50) 1.106(28.10) 0.610(15.57) 0.571(14.50) 0.590(14.22) Component in accordance to RoHS 2002/95/EC and 0.516(13.10) WEEE 2002/96/EC 0.037(0.94) 0.027(0.68) MECHANICAL DATA 0.105(2.67) 0.022(0.58) 0.095(2.41) 0.014(0.35) 0.208(5.28) Case: JEDEC TO-220AB molded plastic body 0.192(4.88) Terminals: Lead solderable per MIL-STD-750,method 2026 Polarity: As marked Dimensions in inches and (millimeters) Mounting Position: Any Weight: 0.08ounce, 2.24 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Ratings at 25 C ambient temperature unless otherwise specified ,Single phase ,half wave ,resistive or inductive load. For capacitive load,derate by 20%.) Symbols Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current See Fig.1 Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) Maximum instantaneous forward voltage at 40.0 A Maximum instantaneous reverse current at rated DC blocking voltage(Note 1) T C =25 C T C =125 C VRRM VRMS VDC SR 4040 SR 4045 SR 4050 SR 4060 40100 SR 40150 30 35 40 45 50 60 100 150 200 21 25 28 32 35 42 70 105 140 30 35 40 45 50 60 100 150 200 SR 40200 Units Volts Volts Volts 40.0 Amps IFSM 300.0 Amps VF 0.60 Operating junction temperature range TJ TSTG 0.85 0.70 0.75 0.5 IR R Notes: 1.Pulse test: 300 SR 4035 I(AV) Typical thermal resistance (Note 2) Storage temperature range SR SR 4030 30 50 -65 to+125 -65 to+150 -65 to+150 Volts mA C/W 3 JC 0.95 C C s pulse width,1% duty cycle 2.Thermal resistance from junction to case 2-1 JINAN JINGHENG CO., LTD. lizhenhui mb:+86-13537087568 E-mail:[email protected] RATINGS AND CHARACTERISTIC CURVES SR4030 THRU SR40200 FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 400 PEAK FORWARD SURGE CURRENT(AMPERES) AVERAGE FORWARD CURRENT AMPERES FIG.1-FORWARD CURRENT DERATING CURVE 50 40 SR4030 - SR4045 SR4050 - SR40200 30 20 SINGLE PHASE HALF WAVE 50Hz INDUCTIVE OR RESISTIVE LOAD 10 300 200 100 1 0 0 50 100 10 150 100 NUMBER OF CYCLES AT 60Hz LEAD TEMPERATURE ( C) FIG.4-TYPICAL REVERSE CHARACTERISTICS FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 50 10 INSTANTANEOUS REVERSE CURRENT (mA) INSTANTANEOUS FORWARD CURRENT( AMPERES) 50 TJ=125 C 10 TJ=25 C 1 0.1 TJ=125 C 1 0.1 TJ=25 C 0.01 0.01 0 0.1 0.2 0.3 0.5 0.6 0.7 0.8 0.9 1.0 1.1 0.001 1.2 0 INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 4000 1000 100 1 10 REVERSE VOLTAGE. VOLTS 40 60 80 100 FIG.6-TYPICAL TRANSIENT THERMAL IMPEDANCE 100 TRANSIENT THERMAL IMPEDANCE, C/ W JUNCTION CAPACITANCE(pF) FIG.5-TYPICAL JUNCTION CAPACITANCE 0.1 20 PERCENT OF RATED PEAK REVERSE VOLTAGE% 100 10 1 0.1 0.01 0.1 1 10 100 T, PULSE DURATION ,sec. JINAN JINGHENG CO., LTD. 2-2 lizhenhui mb:+86-13537087568 E-mail:[email protected]