Timers Star Delta Timer Type DAC51 Product Description Star-delta control relay with two adjustable time ranges: Star function (0.1 to 600 s) and star to delta function (50 to 130 ms). Housing 17.5 mm wide suitable for DIN-rail mounting. Property • Time range (Star): 0.1 to 600 s • Time range (Star to Delta): 50 to 130 ms • Knob selection of star time range • Knob adjustable time setting • Automatic start • Repeatability: ≤ 0.2% • Output: 5 A SPDT relay with neutral centre position • For mounting on DIN-rail in accordance with DIN/EN 50 022 • 17.5mm DIN-rail housing(DIN 43880) • LED indication for relay status and power supply ON Type Selection Mounting Output Housing Supply: 24 to 240 VAC/DC For DIN-rail SPDT relay with neutral centre position Mini-D DAC 51 C M24 Time Specifications Time ranges (star) Knob selectable Star to delta delay Neutral centre position Setting accuracy Repeatability Time variation Within rated power supply Within ambient temperature Reset Time and relay Output Specifications Output 0.1 to 1 s 1 to 10 s 6 to 60 s 60 to 600s 50 to 130 ms between star and delta position ≤ 5% ≤ 0.2% ≤ 0.05% ≤ 0.2% Power supply interruption ≥ 200 ms Rated insulation voltage Contact Ratings (AgSnO2) Resistive loads AC 1 DC 12 Small inductive loads AC 15 DC 13 Mechanical life Electrical life Operating frequency Dielectric strength Dielectric voltage Rated impulse withstand voltage SPDT relay with neutral centre position 250 VAC (RMS) μ 5 A @ 250 VAC 5 A @ 24 VDC 2.5 A @ 250 VAC 2.5 A @ 24 VDC ≥ 30 x 106 operations ≥ 105 operations (at 5 A, 250 V, cos ϕ = 1) < 7200 operations/h 2 kVAC (RMS) 4 kV (1.2/50μs) Supply Specifications Power supply Rated operational voltage through terminals A1 and A2 M24: Voltage interruption Overvoltage cat. III (IEC 60664, IEC 60038) Rated operational power AC Supply DC Supply 5 VA 1.5 W 24 to 240 VAC/DC +10% -15%, 45 to 65 Hz ≤ 10 ms www.dold-relay.com 1 DA#51 General Specifications Power ON delay Power OFF delay Indication for Power supply ON Output relays ON ≤ 100 ms ≤ 100 ms Environment Degree of protection Pollution degree Operating temperature Storage temperature LED, green LED, yellow (flashing when timing) (EN 60529) IP 20 3 (IEC 60664) -20 to 60 °C, R.H. < 95% -30 to 80 °C, R.H. < 95% Timer Specifications According to EN 61812-1 Housing Dimensions Material Weight Screw terminals Tightening torque 17.5 x 81 x 67.2 mm PA66 85 g Max 0.5 Nm according to IEC EN 60947 UL, CSA Yes Electromagnetic Compatibility According to EN 61000-6-2 According to EN 61000-6-3 Approval CE Marking EMC Immunity Emission Mode of Operation Time Setting The output relay is normally in the neutral position. When the power supply is applied,the relay switches to star position(pin 16), and the star period starts. At the end of the set time period,the relay returns to the neutral center position and the set delay between star and delta period starts. At the end of the star to delta delay(adjustable from 50 to 130 ms), the relay switches in delta position(pin 18) and does not release until the power supply is interrupted for at least 200ms. If the power supply is interrupted for more than 200ms before the star time period has expired,the relay does not operate and the time circuit is set to zero. The relay is ready for a new time period. Upper knob: Setting of star time range Centre knob: Star time setting on relative scale: 1 to 10 with respect to the chosen range. Lower knob: Star to delta time setting (50 to 130 ms) Operation Diagram ≤ 10 ms ON OFF ON OFF Wiring Diagram Dimensions 67.2 17.5 18.7 2 16 18 A2 2 www.dold-relay.com 45 3 5.5 81 A1 15 Y1