EVERLIGHT 61

EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet (Preliminary)
Luminosity Full Color LED
61-23 RGBC/TR8
Features
․Super-luminosity chip LED.
․White SMT package.
․Built in Red, Green, and Blue chips.
․Lead frame package with individual 6 pins.
․Wide viewing angle.
․Soldering methods: IR reflow soldering.
Descriptions
․ Due to the package design, 61-23 has wide
viewing angle , low power consumption and
adjusting each color is possible thanks to serial
connection by 6 terminal connection (Individual
driving by each terminal) in case of using several
number of LED. And makes it ideal for light pipe
application.
Applications
․Amusement equipment.
․Information boards.
․Flashlight for digital camera of cellular phone.
Device Selection Guide
Chip
Type
R
Material
AlGaInP
Emitted Color
Super Sunset Orange
G
InGaN
Super Green
B
InGaN
Super Blue
Lens Color
Water Clear
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1.0
Device No.:
Prepared date:
Prepared by:
Page: 1 of 10
EVERLIGHT ELECTRONICS CO.,LTD.
61-23 RGBC/TR8
Package Outline Dimensions
Notes: 1.All dimensions are in millimeters.
2.Tolerances unspecified are ±0.1mm.
Absolute Maximum Ratings (Ta=25℃)
Parameter
Reverse Voltage
Symbol
VR
Rating
5
Unit
V
Operating Temperature
Topr
-40 ~ +85
℃
Storage Temperature
Tstg
-40~ +100
℃
Soldering Temperature
Tsol
260 (for 5 second)
℃
Electrostatic Discharge
ESD
Power Dissipation
Pd
Forward Current
IF
Peak Forward Current(Duty
1/10 @ 1KHZ)
IFP
R
G
B
2000
150
150
110
R
G
B
R
G
B
V
mW
40
40
40
100
100
100
mA
mA
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1.0
Device No.:
Prepared date:
Prepared by:
Page: 2 of 10
EVERLIGHT ELECTRONICS CO.,LTD.
61-23 RGBC/TR8
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol
Min.
Typ.
Max.
Unit
IF=40mA
R
Luminous Intensity
Iv
G
-----
1450
-----
mcd
2θ1/2
Peak Wavelength
Dominant
Wavelength
λp
λd
Spectrum Radiation
△λ
Bandwidth
Forward Voltage
Reverse Current
VF
IR
IF=40mA
IF=20mA
B
Viewing Angle
Condition
-----
120
-----
R
-----
621
-----
G
-----
518
-----
B
-----
468
-----
R
-----
615
-----
G
-----
525
-----
B
-----
470
-----
R
-----
18
-----
G
-----
35
-----
B
-----
35
-----
R
-----
2.3
2.9
G
-----
4.6
5.2
B
-----
4.6
5.2
R
-----
-----
10
G
-----
-----
50
B
-----
-----
50
deg
IF=40mA
nm
IF=40mA
nm
IF=40mA
nm
IF=40mA
V
IF=35mA
μA
VR=5V
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1.0
Device No.:
Prepared date:
Prepared by:
Page: 3 of 10
EVERLIGHT ELECTRONICS CO.,LTD.
61-23 RGBC/TR8
Typical Electro-Optical Characteristics Curves (Blue)
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1.0
Device No.:
Prepared date:
Prepared by:
Page: 4 of 10
EVERLIGHT ELECTRONICS CO.,LTD.
61-23 RGBC/TR8
Typical Electro-Optical Characteristics Curves (Red)
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1.0
Device No.:
Prepared date:
Prepared by:
Page: 5 of 10
EVERLIGHT ELECTRONICS CO.,LTD.
61-23 RGBC/TR8
Typical Electro-Optical Characteristics Curves (Green)
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1.0
Device No.:
Prepared date:
Prepared by:
Page: 6 of 10
EVERLIGHT ELECTRONICS CO.,LTD.
61-23 RGBC/TR8
Reel & Carrier Tape Dimensions
Loaded quantity per reel 800 PCS/reel
Note: The tolerances unless mentioned is ±0.1mm , Angle±0.5°,Unit = mm
Label Form Specification
CPN: Customer’s Production Number
P/N : Production Number
QTY: Packing Quantity
CAT: Ranks
HUE: Peak Wavelength
REF: Reference
LOT No: Lot Number
MADE IN TAIWAN: Production Place
Notes
1. Above specification may be changed without notice. EVERLIGHT will reserve authority on
material change for above specification.
2. When using this product, please observe the absolute maximum ratings and the instructions for
using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any
damage resulting from use of the product which does not comply with the absolute maximum
ratings and the instructions included in these specification sheets.
3. These specification sheets include materials protected under copyright of EVERLIGHT
corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s
consent.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1.0
Device No.:
Prepared date:
Prepared by:
Page: 7 of 10
EVERLIGHT ELECTRONICS CO.,LTD.
61-23 RGBC/TR8
Moisture Resistant Packaging
Aluminum moistue-proof bag
Label
Desiccant
Label
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level:90%
LTPD:10%
No.
Items
Test Condition
1
Reflow
Temp. : 240℃±5℃
Min. 5sec.
2
Test
Sample
Ac/Re
Hours/Cycles Size
22 PCS.
0/1
Temperature Cycle
H : +100℃ 15min
∫ 5 min
L : -40℃ 15min
300 Cycles 22 PCS.
0/1
Thermal Shock
H : +100℃ 5min
∫ 10 sec
L : -10℃ 5min
300 Cycles 22 PCS.
0/1
Temp. : 100℃
1000 Hrs.
22 PCS.
0/1
Temp. : -55℃
1000 Hrs.
22 PCS.
0/1
3
High Temperature
Storage
Low Temperature
Storage
4
5
6 Min.
6
DC Operating Life
IF = 20 mA
1000 Hrs.
22 PCS.
0/1
7
High Temperature /
High Humidity
85℃/RH85%
1000 Hrs.
22 PCS.
0/1
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1.0
Device No.:
Prepared date:
Prepared by:
Page: 8 of 10
EVERLIGHT ELECTRONICS CO.,LTD.
61-23 RGBC/TR8
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift
will cause big current change ( Burn out will happen ).
2. Storage time
2.1 The operation of Temperature and RH are : 5℃~35℃, RH60%.
2.2 Once the package is opened, the products should be used within a week.
Otherwise, they should be kept in a damp proof box with descanting agent.
Considering the tape life , we suggest our customers to use our products
within a year(from production date).
2.3 If opened more than one week in an atmosphere 5℃~35℃, RH 60%,
they should be treated at 60℃±5℃for 12hrs.
Soldering Heat
Reflow Solder Test
Soldering Iron
Basic spec is ≦5 sec when 260℃.If temperature is higher, time should be shorter (+10℃→
-1sec). Power dissipation of Iron should be smaller than 15 W , and temperature should be
controllable. Surface temperature of the device should be under 230 ℃.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1.0
Device No.:
Prepared date:
Prepared by:
Page: 9 of 10
EVERLIGHT ELECTRONICS CO.,LTD.
61-23 RGBC/TR8
Rework
1. Customer must finish rework within 5 sec under 245℃.
2. The head of iron can not touch copper foil.
3. Twin-head type is preferred.
○
×
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1.0
Device No.:
Prepared date:
Prepared by:
Page: 10 of 10