INFINEON Q65412-D250

Differential Magneto Resistor
FP 412 D 250
Dimensions in mm
Features
Typical applications
•
•
•
•
•
•
•
•
•
•
•
Accurate intercenter spacing
High operating temperature range
High output voltage
Signal amplitude independent of speed
Compact construction
Available in strip form for automatic
assembly
Detection of speed
Detection of position
Detection of sense of rotation
Angular encoders
Linear position sensing
Type
Ordering Code
FP 412 D 250
Q65412-D 250
Semiconductor Group
1
07.96
FP 412 D 250
The differential magneto resistor FP 412 D 250 is a magnetically variable resistor in Dtype InSb/NiSb semiconductor material. The MR is glued onto a ferrite substrate and is
supplied in a "MICROPACK" copper/polyimide film package. The basic resistance of
each of the magneto resistors is 250 Ω. The series coupled MRs are actuated by an
external magnetic field or can be biased by a permanent magnet and actuated by a soft
iron target.
Maximum ratings
Parameter
Symbol
Value
Unit
Operating temperature
TA
Tstg
Ptot
VIN
– 40 / +175
°C
– 40 / +185
°C
1000
mW
12
V
Gth case
Gth A
≥ 25
1
mW/K
mW/K
Basic resistance
(I ≤ 1 mA, B = 0 T)
R01-3
370…630
Ω
Center symmetry3)
M
RB/R0
≤ 10
%
> 2.8
> 12
–
–
– 1.8
– 2.7
– 2.9
%/K
%/K
%/K
Storage temperature
Power
dissipation1)
Supply
voltage2)(B
= 0.2 T)
Thermal conductivity
–attached to heatsink
–in still air
Characteristics (TA = 25 °C)
Relative resistance change
(R0 = R01-3, R04-6 at B = 0 T)
B = ± 0.3 T4)
B=±1T
Temperature coefficient
B=0T
B = ± 0.3 T
B=±1T
TCR
1) Corresponding to diagram Ptot = f(Tcase)
2) Corresponding to diagram VIN = f(Tcase)
3)
M
R 01 – 2 – R 02 – 3
= -------------------------------× 100% for R01-2 > R02-3
R 01 – 2
4) 1 T = 1 Tesla = 104 Gauss
Semiconductor Group
2
FP 412 D 250
Max. power dissipation versus
temperature
Ptot = f(T), T = Tcase, TA
Maximum supply voltage
versus temperature
VIN = f(T), B = 0.2 T T = Tcase, TA
Typical MR resistance
versus temperature
R1-3 = f(TA), B = Parameter
Typical MR resistance
versus magnetic induction B
R1-3 = f(B), TA = 25 °C
Semiconductor Group
3