• High brightness surface mount LED. • Based on InGaN / Sapphire technology. • 120° viewing angle. • Small package outline (LxWxH) of 2.8 x 3.2 x 1.8 mm. • Qualified according to JEDEC moisture sensitivity Level 2. • Compatible to both IR reflow soldering and TTW soldering. Part Ordering Number Chip Technology / Color InGaN / Viewing angle Luminous Intensity @ If = 20mA Iv ( mcd ) 120 45.0 … 56.0 … 71.5 … 90.0 … Blue, 470 nm InGaN / 120 120 120 120 224.0 … 560.0 180.0 … 450.0 180.0 … 224.0 224.0 … 285.0 285.0 … 355.0 355.0 … 450.0 White InGaN / 180.0 … 450.0 224.0 … 285.0 285.0 … 355.0 355.0 … 450.0 450.0 … 560.0 True Green InGaN / 90.0 112.5 140.0 180.0 180.0 … 224.0 224.0 … 285.0 285.0 … 355.0 355.0 … 450.0 True Green InGaN / 56.0 71.5 90.0 112.5 71.5 … 180.0 71.5 … 90.0 … 112.5 … 140.0 … Blue, 470 nm InGaN / 45.0 … 112.5 120 White 450.0 … 1125.0 450.0 … 560.0 560.0 … 715.0 715.0 … 900.0 900.0 … 1125.0 *Not for new design NOTE: 1. All part number above comes in a quantity of 2000 units per reel. 2. Other luminous intensity groups are also available upon request. 3. Luminous intensity is measured with an accuracy of ±11%. 4. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. 5. An optional Vf binning is also available upon request. Binning scheme is as per following table. Electrical Characteristics at Ta=25°C. Vf @ If = 20mA Part Number Vr @ Ir = 10uA Min. (V) Typ. (V) Max. (V) Min.(V) BL-PDB, BL-PDW 3.0 3.2 3.8 5 BL-PDT 3.0 3.4 4.0 5 Forward voltage, Vf is measured with an accuracy of ±0.1 V. Wavelength Grouping. Color BL-PDB; Blue BL-PDT; True Green Group Wavelength distribution (nm) Full 464 - 476 W 464 - 468 X 468 - 472 Y 472 - 476 Full 520- 536 W 520 - 524 X 524 - 528 Y 528 – 532 Z 532 – 536 Dominant wavelength is measured with an accuracy of ±1 nm. Dom inant White Bin Structure 0.43 0.42 0.41 0.40 E3 0.39 0.38 E4 E1 0.37 0.36 E2 C3 0.35 0.34 C1 0.33 0.32 C2 A3 0.31 C4 0.30 A4 A1 0.29 0.28 A2 0.27 0.26 0.25 0.24 0.27 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 Chromaticity coordinate groups are measured with an accuracy of ±0.01. Bin A1 A2 A3 A4 C1 C2 C3 C4 Cx Cy Cx Cy Cx Cy Cx Cy Cx Cy Cx Cy Cx Cy Cx Cy 0.2775 0.2732 0.2775 0.2557 0.2900 0.2939 0.2900 0.2764 0.3025 0.3146 0.3025 0.2971 0.3150 0.3354 0.3150 0.3179 W 0.2900 0.2939 0.2900 0.2764 0.3025 0.3146 0.3025 0.2971 0.3150 0.3354 0.3150 0.3179 0.3275 0.3561 0.3275 0.3386 0.2900 0.3114 0.2900 0.2939 0.3025 0.3321 0.3025 0.3146 0.3150 0.3529 0.3150 0.3354 0.3275 0.3736 0.3275 0.3561 0.2775 0.2907 0.2775 0.2732 0.2900 0.3114 0.2900 0.2939 0.3025 0.3321 0.3025 0.3146 0.3150 0.3529 0.3150 0.3354 Bin E1 Cx Cy E2 Cx Cy E3 Cx Cy E4 Cx Cy 0.3275 0.3561 0.3275 0.3386 0.3400 0.3768 0.3400 0.3593 X 0.3400 0.3768 0.3400 0.3593 0.3525 0.3975 0.3525 0.3800 0.3400 0.3943 0.3400 0.3768 0.3525 0.4150 0.3525 0.3975 0.3275 0.3736 0.3275 0.3561 0.3400 0.3943 0.3400 0.3768 Absolute Maximum Ratings. Maximum Value Unit DC forward current. 20 mA Peak pulse current; (tp ≤ 10 µs, Duty cycle = 0.005) 200 mA Reverse voltage. LED junction temperature. 5 V 100 °C Operating temperature. -40 … +85 °C Storage temperature. -40 … +100 °C 73 mW Power dissipation ( at room temperature ) Recommended Solder Pad Relative luminous intensity vs. forward current. Forward current vs. forward voltage. Forward Current (mA) vs. Forward Voltage 40 2.2 2 35 1.8 Forward Current (mA) Relative intensity. Normalized at 20 mA. Intensity vs. DC Forward Current 1.6 1.4 1.2 1 0.8 0.6 0.4 30 25 20 15 10 5 0.2 0 0 0 10 20 30 40 1 50 1.5 2 2.5 20° 3.5 4 4.5 5 Maximum forward current vs. temperature. Radiation pattern. 30° 3 Forward Voltage (V) FORWARD CURRENT (mA) 10° 0° 25 1.0 40° 20 50° 0.6 60° 0.4 Forward Current, If 0.8 15 10 5 70° 0.2 0 80° 0 10 20 30 90° 50 60 70 80 Dominant Wavelength vs. Forward Current Relative Intensity vs. Wavelength Relative Spectral Emission Wavelength vs. Forward Current 1.0 470 535 0.9 469.5 533 469 531 529 White 0.8 Relative Intensity 40 Ambient Temperature 0 0.7 468.5 Blue 0.6 True Green 0.4 0.3 523 467 521 519 Green 466.5 517 515 466 0.0 400 525 467.5 0.2 0.1 527 Blue 468 0.5 450 500 550 600 650 Wavelength (nm) 700 750 800 10 20 30 40 50 90 Taping And Orientation. Reels come in quantity of 8000 units or 2000 units. Reel diameters are 330 mm and 180 mm respectively. Recommended Sn-Pb IR-Reflow Soldering Profile. Classification Reflow Profile (JEDEC J-STD-020C) 275 250 235-240oC 10-30s 200 Ramp-up 3 oC/sec 183 oC o Temperature ( C) 225 175 60-150s 150 125 Ramp-dow n 6 oC/sec max. 100 Preheat 60-120s 75 50 360s max 25 0 50 100 150 200 Time (sec) Recommended Pb Free IR-Reflow Soldering Profile. Classification Reflow Profile (JEDEC J-STD-020C) 300 275 o Temperature ( C) 250 Ramp-up 3 oC/sec 217 oC 225 260-255oC 10-30s 200 60-150s 175 150 125 Ramp-down 6 oC/sec max. 100 Preheat 60-180s 75 50 480s max 25 0 50 100 Time (sec) 150 200