Speed TEMPFET BTS244Z Speed TEMPFET® ® N-Channel Enhancement mode 1 Logic Level Input Analog driving possible 5 PG-TO220-5-62 Fast switching up to 1 MHz PG-TO220-5-3 Potential-free temperature sensor with thyristor characteristics Overtemperature protection •Green Product (RoHS Compliant) •AEC Qualified Avalanche rated Type BTS 244 Z VDS 55 V RDS(on) Package 13 m PG-TO220-5-3 PG-TO220-5-43 PG-TO220-5-62 PG-TO-220-5-43 D Pin 3 and TAB G Pin 1 A Pin 2 Temperature Sensor K Pin 4 S Pin 5 Data Sheet Pin Symbol Function 1 G Gate 2 A Anode Temperature Sensor 3 D Drain 4 K Cathode Temperature Sensor 5 S Source 1 Rev.1.3, 2009-12-04 Speed TEMPFET BTS244Z Maximum Ratings Parameter Symbol Drain source voltage VDS V 55 Gate source voltage VGS 20 Nominal load current (ISO 10483) ID(ISO) Drain-gate voltage, RGS = 20 k DGR Value Unit V 55 A VGS = 4.5 V, VDS 0.5 V, TC = 85 °C 19 VGS = 10 V, VDS 0.5 V, TC = 85 °C 26 ID 35 Pulsed drain current ID puls 188 Avalanche energy, single pulse EAS 1.65 J Ptot 170 W -40 ...+175 °C Continuous drain current 1) TC = 100 °C, VGS = 4.5V ID = 19 A, RGS = 25 Power dissipation TC = 25 °C Operating temperature 2) Tj Peak temperature ( single event ) Tjpeak Storage temperature Tstg 200 -55 ... +150 DIN humidity category, DIN 40 040 E IEC climatic category; DIN IEC 68-1 40/150/56 1current limited by bond wire 2Note: Thermal trip temperature of temperature sensor is below 175°C Data Sheet 2 Rev.1.3, 2009-12-04 Speed TEMPFET BTS244Z Thermal Characteristics Parameter Symbol Values Unit min. typ. max. Characteristics junction - case: RthJC - - 0.88 Thermal resistance @ min. footprint Rth(JA) - - 62 Thermal resistance @ 6 cm2 cooling area 1) Rth(JA) - 33 40 K/W Electrical Characteristics Symbol Parameter at Tj = 25°C, unless otherwise specified Values Unit min. typ. max. 55 - - ID = 130 μA 1.2 1.6 2 ID = 250 μA - 1.65 - Static Characteristics Drain-source breakdown voltage V(BR)DSS V VGS = 0 V, ID = 0.25 mA VGS(th) Gate threshold voltage, VGS = VDS IDSS Zero gate voltage drain current μA VDS = 50 V, VGS = 0 V, Tj = -40 °C - - 0.1 VDS = 50 V, VGS = 0 V, Tj = 25 °C - 0.1 1 VDS = 50 V, VGS = 0 V, Tj = 150 °C - - 100 IGSS Gate-source leakage current nA VGS = 20 V, VDS = 0 V, Tj = 25 °C - 10 100 VGS = 20 V, VDS = 0 V, Tj = 150 °C - 20 100 RDS(on) Drain-Source on-state resistance m VGS = 4.5 V, ID = 19 A - 16 18 VGS = 10 V, ID = 19 A - 11.5 13 1 Device on 50mm*50mm*1.5mm epoxy PCB FR4 with 6cm2 (one layer, 70μm thick) copper area for drain connection. PCB mounted vertical without blown air. Data Sheet 3 Rev.1.3, 2009-12-04 Speed TEMPFET BTS244Z Electrical Characteristics Parameter Symbol at Tj = 25°C, unless otherwise specified Values Unit min. typ. max. Dynamic Characteristics Forward transconductance gfs 25 - - S VDS>2*ID *RDS(on)max , ID = 35 A Input capacitance Ciss - 2130 2660 pF Coss - 600 750 Crss - 320 400 td(on) - 15 25 tr - 70 105 td(off) - 40 60 tf - 25 40 Qg(th) - 2.5 3.8 Qg(5) - 50 75 Qg(total) - 85 130 V(plateau) - 4.5 - VGS = 0 V, VDS = 25 V, f = 1 MHz Output capacitance VGS = 0 V, VDS = 25 V, f = 1 MHz Reverse transfer capacitance VGS = 0 V, VDS = 25 V, f = 1 MHz Turn-on delay time ns VDD = 30 V, VGS = 4.5 V, ID = 47 A, RG = 2.2 Rise time VDD = 30 V, VGS = 4.5 V, ID = 47 A, RG = 2.2 Turn-off delay time VDD = 30 V, VGS = 4.5 V, ID = 47 A, RG = 2.2 Fall time VDD = 30 V, VGS = 4.5 V, ID = 47 A, RG = 2.2 Gate Charge Characteristics Gate charge at threshold nC VDD = 40 V, ID = 0.1 A, VGS = 0 to 1 V Gate charge at 5.0 V VDD = 40 V, ID = 47 A, V GS = 0 to 5 V Gate charge total VDD = 40 V, ID = 47 A, V GS = 0 to 10 V Gate plateau voltage V VDD = 40 V, ID = 47 A Data Sheet 4 Rev.1.3, 2009-12-04 Speed TEMPFET BTS244Z Electrical Characteristics Symbol Parameter at Tj = 25°C, unless otherwise specified Values Unit min. typ. max. IS 35 - - IFM 188 - - VSD - 1.25 1.8 V trr - 110 165 ns Qrr - 0.23 0.35 μC Reverse Diode Inverse diode continuous forward current A TC = 25 °C Inverse diode direct current,pulsed TC = 25 °C Inverse diode forward voltage VGS = 0 V, IF = 94 A Reverse recovery time VR = 30 V, IF =IS, diF/dt = 100 A/μs Reverse recovery charge VR = 30 V, IF =IS, diF/dt = 100 A/μs Sensor Characteristics For temperature sensing, i.e. temperature protection, please consider application note "Temperature sense concept - Speed TEMPFET”. For short circuit protection please consider application note "Short circuit behaviour of the Speed TEMPFET family”. All application notes are available at http://www.infineon.com/tempfet/ VAK(on) Forward voltage V IAK(on) = 5 mA, Tj = -40...+150 °C - 1.3 1.4 IAK(on) = 1.5 mA, Tj = 150 °C - - 0.9 Sensor override - - 10 - - 5 - - 600 tP = 100 μs, Tj = -40...+150 °C IAK(on) Forward current mA Tj = -40...+150 °C Sensor override tP = 100 μs, Tj = -40...+150 °C Data Sheet 5 Rev.1.3, 2009-12-04 Speed TEMPFET BTS244Z Electrical Characteristics Parameter Symbol at Tj = 25°C, unless otherwise specified Values Unit min. typ. max. - - 4 μA 100 - - μs - - 150 Sensor Characteristics IAK(off) Temperature sensor leakage current Tj = 150 °C treset Min. reset pulse duration 1) Tj = -40...+150 °C, IAK(on) = 0.3 mA, VAK(Reset)<0.5V VAK Recovery time1)2) trecovery Tj = -40...+150 °C, IAK(on) = 0.3 mA Characteristics IAK(hold) Holding current, VAK(off) = 5V mA Tj = 25 °C 0.05 - 0.5 Tj = 150 °C 0.05 - 0.3 TTS(on) 150 160 170 °C toff 0.5 - 2.5 μs VAK(reset) 0.5 - - V Thermal trip temperature VTS = 5V Turn-off time (Pin G+A and K+S connected) VTS = 5V, ITS(on) = 2 mA Reset voltage Tj = -40...+150°C Sensor recovery behaviour: S ensor R E S E T V A K [V ] tre s e t 5 4 0 S ensor O N t re c o v e ry R eset OFF 1See diagram Sensor recovery behaviour 2Time after reset pulse until V AK reaches 4V again Data Sheet 6 Rev.1.3, 2009-12-04 Speed TEMPFET BTS244Z 1 Maximum allowable power dissipation 2 Drain current Ptot = f(TC) ID = f(TC ); VGS 180 4.5V 40 A 30 120 ID Ptot 140 25 100 20 80 15 60 10 40 5 20 0 -40 0 40 80 °C 120 0 0 180 20 40 60 80 100 120 140 °C TC 180 TC 3 Typ. transient thermal impedance 4 Transient thermal impedance ZthJA=f(tp ) @ 6 cm2 cooling area ZthJC = f (tp ) Parameter: D=tp /T parameter : D = tp /T 10 2 10 1 K/W K/W 10 0 D=0.5 10 1 D=0.5 Z thJC Z thJA 0.2 0.1 0.2 10 -1 0.05 0.1 0.05 10 0 0.02 0.02 10 -2 0.01 10 -1 0.01 Single pulse 10 -3 Single pulse 10 -2 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 s 10 10 3 -8 -7 -6 10 10 10 10 tp Data Sheet -4 -5 -4 -3 -2 10 10 10 10 -1 0 10 10 1 s 10 3 tp 7 Rev.1.3, 2009-12-04 Speed TEMPFET BTS244Z 5 Safe operating area 6 Typ. output characteristic ID=f(VDS ); D=0.01; TC =25°C; VGS =4.5V ID = f(VDS); Tj =25°C Parameter: VGS 180 10V A 7V 140 6V ID ID 120 100 5V 80 4.5V 60 4V 40 3.5V 20 3V 0 0 1 V 2 4 VDS 7 On-state resistance 8 On-state resistance RON = f(Tj ); ID=19A; VGS = 4.5V RON = f(Tj ); ID=19A; VGS = 10V 40 30 m m 30 RDS(on) RDS(on) max. typ. 25 20 max. 20 typ. 15 15 10 10 5 5 0 -50 -25 0 25 50 75 100 125 °C 0 -50 175 Tj Data Sheet -25 0 25 50 75 100 125 °C 175 Tj 8 Rev.1.3, 2009-12-04 Speed TEMPFET BTS244Z 9 Typ. transfer characteristics 10 Typ. input threshold voltage ID = f(VGS); VDS = 12V; Tj = 25°C VGS(th) = f(Tj); VDS =VGS Parameter: ID 100 2.4 A V 2.0 VGS(th) 80 ID 70 60 1.8 130mA 1.6 13mA 1.4 50 1.2 40 1.0 1.3mA 130μA 0.8 30 0.6 20 0.4 10 0.2 0 0 1 2 V 3 0.0 -50 5 -25 0 25 50 75 100 125 °C VGS 175 Tj 11 Typ. capacitances 12 Typ. forward charcteristics of C = f(VDS); VGS =0 V, f=1 MHz reverse diode IF = f(VSD ) tp = 80μs (spread); Parameter: Tj 10 1 10 2 A nF 150°C 10 1 25°C C IF Ciss 10 0 Coss 10 0 Crss 10 -1 0 4 8 12 16 20 24 28 32 V 10 -1 0.0 40 VDS Data Sheet 0.2 0.4 0.6 0.8 1.0 1.2 V 1.6 VSD 9 Rev.1.3, 2009-12-04 Speed TEMPFET BTS244Z 13 Typ. gate charge 14 Drain-source break down voltage VGS = f(QGate); ID puls = 47A V(BR)DSS = f(Tj ) BTS 244 Z 66 V V V(BR)DSS 16 VGS 12 0,2 VDS max 10 0,8 VDS max 62 60 8 58 6 56 4 54 2 52 0 0 Data Sheet 20 40 60 80 100 50 -40 nC 140 QGate 0 40 80 120 °C 180 Tj 10 Rev.1.3, 2009-12-04 Speed TEMPFET BTS244Z Package Outlines Package Outlines 9.9 ±0.2 A 9.5 ±0.2 4.4 1.3 +0.1 -0.02 B C 9.2 ±0.2 0.05 1) 10.2 ±0.3 8.6 ±0.3 3.7 -0.15 13 17.5 ±0.3 15.6 ±0.3 6.6 2.8 ±0.2 7.5 3.3 ±0.3 1 0...0.15 0.5 ±0.1 2.4 5 x 0.8 ±0.1 4 x 1.7 0.25 M A B C 4.5 ±0.3 8.4 ±0.3 1) Shear and punch direction no burrs this surface Back side, heatsink contour All metal surfaces tin plated, except area of cut. Figure 1 PG-TO220-5-3 4.4 9.9 +0.1 8.0 7.5 0.05 1) 3.6 ±0.3 2.4 9.2 ±0.2 1.5 ±0.25 B (1.3) 6.6 6.5 A (14.1) 10.5 ±0.15 1.3 -0.02 0...0.15 0.1 0.5 +0.15 5˚ +0.1 +3˚ 5 x 0.8 -0.03 4 x 1.7 0.1 B 0.25 M A B 1) Shear and punch direction no burrs this surface. Back side, heatsink contour All metal surfaces tin plated, except area of cut. P-TO220-5-62-PO V01 Figure 2 Data Sheet PG-TO220-5-62 11 Rev.1.3, 2009-12-04 Speed TEMPFET BTS244Z Package Outlines 9.9 ±0.2 A 9.5 ±0.2 4.4 1.3 +0.1 -0.02 0.05 13.5 ±0.5 1) 9.2 ±0.2 B 3.7 -0.15 13 15.6 ±0.3 17.5 ±0.3 6.6 2.8 ±0.2 7.5 C 0...0.15 0.5 ±0.1 5 x 0.8 ±0.1 4 x 1.7 0.25 2.4 M A B C 1) Shear and punch direction no burrs this surface Back side, heatsink contour All metal surfaces tin plated, except area of cut. Figure 3 PG-TO220-5-43 Green Product (RoHS compliant) To meet the world-wide customer requirements for environmentally friendly products and to be compliant with government regulations the device is available as a green product. Green products are RoHS-Compliant (i.e Pb-free finish on leads and suitable for Pb-free soldering according to IPC/JEDEC J-STD-020). For further information on alternative packages, please visit our website: http://www.infineon.com/packages. Data Sheet 12 Dimensions in mm Rev.1.3, 2009-12-04 Speed TEMPFET BTS244Z Revision History 2 Revision History Revision Date Changes 1.3 2009-12-04 updated package drawing of PG-TO220-5-62 1.2 2009-07-31 removed 100ms and DC line in SOA diagram 1.1 2008-11-10 all pages: added new Infineon logo Initial version of RoHS-compliant derivate of the BTS244Z Page 1 and 12: added RoHS compliance statement and Green product feature Page 1, 11 and 12: Package changed to RoHS compliant version page 13: added Revision history page 14: update of disclaimer Data Sheet 13 Rev.1.3, 2009-12-04 Edition 2009-12-04 Published by Infineon Technologies AG 81726 Munich, Germany © 2009 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.