BY214-400 --->1000 RECTIFIER DIODES MAIN PRODUCTS CHARACTERISTICS IF(av) 6A VRRM 1000 V VF (max) 1.2 V STANDARD RECTIFIER HIGH SURGE CURRENT CAPABILITY LOW FORWARD VOLTAGE DROP AG (Plastic) ABSOLUTE RATINGS (limiting values) Symbol IF(AV) Parameter Average forward current * Ta=90°C IFSM Surge non repetitive forward current Ptot Power dissipation * tp=10ms sinusoidal Ta=90°C Tstg Tj TL Storage and junction temperature range Maximum lead temperature for soldering during 10s at 4mm from case Value 6 Unit A 400 A 6 W - 65 to + 150 °C 230 °C * Single phase, half wave, resistive or inductive load. Symbol VRRM Parameter Repetitive peak reverse voltage 400 400 BY214600 800 600 800 1000 1000 Unit V THERMAL RESISTANCE Symbol Rth (j-a) Parameter Junction ambient * Value 10 Unit °C/W * On infinite heatsink with 10mm lead lenght August 1998 - Ed: 1A 1/2 BY214-400 ---> 1000 ELECTRICAL CHARACTERISTICS Symbol VF * IR ** Test Conditions Tj = 25°C IF = 20 A Tj = 100°C VR = VRRM Min. Typ. Max. 1.2 250 Unit V µA Pulse test : * tp = 380 µs, duty cycle < 2 % ** tp = 5 ms, duty cycle < 2 % PACKAGE MECHANICAL DATA AG (Plastic) B A note 1 L1 B L1 O /D /C O note 1 O /D note 2 DIMENSIONS REF. Millimeters Min. A B ∅C ∅D L1 Max. Inches Min. 9 20 1.35 0.354 0.787 8 1.45 1.27 0.053 NOTES Max. 0.315 0.057 0.050 1- The lead is not controlled within zone L1. 2- The minimum axial length within which the device may be placed bent at right angles is 0.79” (20 mm). Marking : Type number Weight : 2.16 g Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsIbility for the consequences of use of such information nor for any infringement of patents or other rights of thirdparties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics 1998 STMicroelectronics - Printed in Italy - All rights reserved. STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - France - Germany - Italy - Japan - Korea - Malaysia - Malta - Mexico - Morocco The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A. 2/2