CD4019BM/CD4019BC Quad AND-OR Select Gate General Description Features The CD4019BM/CD4019BC is a complementary MOS quad AND-OR select gate. Low power and high noise margin over a wide voltage range is possible through implementation of N- and P-channel enhancement mode transistors. These complementary MOS (CMOS) transistors provide the building blocks for the 4 ‘‘AND-OR select’’ gate configurations, each consisting of two 2-input AND gates driving a single 2-input OR gate. Selection is accomplished by control bits KA and KB. All inputs are protected against static discharge damage. Y Y Y Wide supply voltage range High noise immunity Low power TTL compatibility 3.0V to 15V 0.45 VDD (typ.) Fan out of 2 driving 74L or 1 driving 74LS Applications Y Y Y Y AND-OR select gating Shift-right/shift-left registers True/complement selection AND/OR/EXCLUSIVE-OR selection Connection and Schematic Diagrams Dual-In-Line Package Order Number CD4019B TL/F/5952 – 1 Top View Schematic diagram for 1 of 4 identical stages C1995 National Semiconductor Corporation TL/F/5952 TL/F/5952 – 2 RRD-B30M105/Printed in U. S. A. CD4019BM/CD4019BC Quad AND-OR Select Gate February 1988 Absolute Maximum Ratings (Notes 1 & 2) Recommended Operation Conditions (Note 2) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/Distributors for availability and specifications. Supply Voltage (VDD) Input Voltage (VIN) Storage Temperature Range (TS) Power Dissipation (PD) Dual-In-Line Small Outline Lead Temperature (TL) (Soldering, 10 seconds) DC Supply Voltage (VDD) Input Voltage (VIN) Operating Temperature Range (TA) CD4019BM CD4019BC b 0.5V to a 18V b 0.5V to VDD a 0.5V b 65§ C to a 150§ C a 3V to a 15V 0V to VDD V b 55§ C to a 125§ C b 40§ C to a 85§ C 700 mW 500 mW 260§ C DC Electrical Characteristics CD4019BM (Note 2) Symbol Parameter b 55§ C Conditions Min Max a 25§ C Min a 125§ C Typ Max Min Units Max IDD Quiescent Device Current VDD e 5V VDD e 10V VDD e 15V 0.25 0.5 1.0 0.03 0.05 0.07 0.25 0.5 1.0 7.5 15 30 mA mA mA VOL Low Level Output Voltage lIOl k 1 mA VDD e 5V VDD e 10V VDD e 15V 0.05 0.05 0.05 0 0 0 0.05 0.05 0.05 0.05 0.05 0.05 V V V High Level Output Voltage lIOl k 1 mA VDD e 5V VDD e 10V VDD e 15V VIL Low Level Input Voltage VDD e 5V, VO e 0.5V or 4.5V VDD e 10V, VO e 1.0V or 9.0V VDD e 15V, VO e 1.5V or 13.5V VIH High Level Input Voltage VDD e 5V, VO e 0.5V or 4.5V VDD e 10V, VO e 1.0V or 9.0V VDD e 15V, VO e 1.5V or 13.5V 3.5 7.0 11.0 3.5 7.0 11.0 3 6 9 3.5 7.0 11.0 V V V IOL Low Level Output Current (Note 3) VDD e 5V, VO e 0.4V VDD e 10V, VO e 0.5V VDD e 15V, VO e 1.5V 0.64 1.6 4.2 0.51 1.3 3.4 1 2.5 10 0.36 0.9 2.4 mA mA mA IOH High Level Output VDD e 5V, VO e 4.6V Current (Note 3) VDD e 10V, VO e 9.5V VDD e 15V, VO e 13.5V b 0.25 b 0.62 b 1.8 b 0.2 b 0.5 b 1.5 b 0.4 b 1.0 b 3.0 b 0.14 b 0.35 b 1.1 mA mA mA IIN Input Current VOH 4.95 9.95 14.95 4.95 9.95 14.95 1.5 3.0 4.0 VDD e 15V, VIN e 0V VDD e 15V, VIN e 15V 5 10 15 2 4 6 4.95 9.95 14.95 1.5 3.0 4.0 V V V 1.5 3.0 4.0 b 0.10 b 10 b 5 b 0.10 b 1.0 0.10 10b5 0.10 1.0 V V V mA mA Note 1: ‘‘Absolute Maximum Ratings’’ are those values beyond which the safety of the device cannot be guaranteed; they are not meant to imply that the devices should be operated at these limits. The tables of ‘‘Recommended Operating Conditions’’ and ‘‘Electrical Characteristics’’ provide conditions for actual device operation. Note 2: VSS e 0V unless otherwise specified. Note 3: IOH and IOL are tested one output at a time. 2 DC Electrical Characteristics CD4019BC (Note 2) Symbol Parameter b 55§ C Conditions Min a 25§ C Max Min a 125§ C Typ Max Min Units Max IDD Quiescent Device Current VDD e 5V VDD e 10V VDD e 15V 1 2 4 0.03 0.05 0.07 1 2 4 7.5 15 30 mA mA mA VOL Low Level Output Voltage lIOl k 1 mA VDD e 5V VDD e 10V VDD e 15V 0.05 0.05 0.05 0 0 0 0.05 0.05 0.05 0.05 0.05 0.05 V V V High Level Output Voltage lIOl k 1 mA VDD e 5V VDD e 10V VDD e 15V VIL Low Level Input Voltage VDD e 5V, VO e 0.5V or 4.5V VDD e 10V, VO e 1.0V or 9.0V VDD e 15V, VO e 1.5V or 13.5V VIH High Level Input Voltage VDD e 5V, VO e 0.5V or 4.5V VDD e 10V, VO e 1.0V or 9.0V VDD e 15V, VO e 1.5V or 13.5V 3.5 7.0 11.0 3.5 7.0 11.0 3 6 9 3.5 7.0 11.0 V V V IOL Low Level Output Current (Note 3) VDD e 5V, VO e 0.4V VDD e 10V, VO e 0.5V VDD e 15V, VO e 1.5V 0.52 1.3 3.6 0.44 1.1 3.0 1 2.5 10 0.36 0.9 2.4 mA mA mA IOH High Level Output VDD e 5V, VO e 4.6V Current (Note 3) VDD e 10V, VO e 9.5V VDD e 15V, VO e 13.5V b 0.2 b 0.5 b 1.4 b 0.16 b 0.4 b 1.2 b 0.4 b 1.0 b 3.0 b 0.12 b 0.3 b 1.0 mA mA mA IIN Input Current VOH 4.95 9.95 14.95 4.95 9.95 14.95 1.5 3.0 4.0 VDD e 15V, VIN e 0V VDD e 15V, VIN e 15V 5 10 15 2 4 6 4.95 9.95 14.95 1.5 3.0 4.0 V V V 1.5 3.0 4.0 V V V b 0.30 b 10 b 5 b 0.30 b 1.0 0.30 10b5 0.30 1.0 mA mA Note 1: ‘‘Absolute Maximum Ratings’’ are those values beyond which the safety of the device cannot be guaranteed; they are not meant to imply that the devices should be operated at these limits. The tables of ‘‘Recommended Operating Conditions’’ and ‘‘Electrical Characteristics’’ provide conditions for actual device operation. Note 2: VSS e 0V unless otherwise specified. Note 3: IOH and IOL are tested one output at a time. AC Electrical Characteristics* TA e 25§ C, CL e 50 pF, RL e 200k, unless otherwise specified Symbol Parameter Conditions Min Typ Max Units 100 50 45 300 120 100 ns ns ns tPHL, tPLH Propagation Delay, Input to Output VDD e 5V VDD e 10V VDD e 15V tTHL High-to-Low Level Transition Time VDD e 5V VDD e 10V VDD e 15V 100 50 40 200 100 80 ns ns ns tTLH Low-to-High Level Transition Time VDD e 5V VDD e 10V VDD e 15V 150 70 50 300 140 100 ns ns ns CIN Input Capacitance All A and B Inputs KA and KB Inputs 5 10 7.5 15 pF pF *AC Parameters are guaranteed by DC correlated testing. 3 CD4019BM/CD4019BC Quad AND-OR Select Gate Physical Dimensions inches (millimeters) (Continued) Ceramic Dual-In-Line Package (J) Order Number CD4019BMJ or CD4019BCJ NS Package Number J16A Molded Dual-In-Line Package (N) Order Number CD4019BMN or CD4019BCN NS Package Number N16E LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation 1111 West Bardin Road Arlington, TX 76017 Tel: 1(800) 272-9959 Fax: 1(800) 737-7018 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Europe Fax: (a49) 0-180-530 85 86 Email: cnjwge @ tevm2.nsc.com Deutsch Tel: (a49) 0-180-530 85 85 English Tel: (a49) 0-180-532 78 32 Fran3ais Tel: (a49) 0-180-532 93 58 Italiano Tel: (a49) 0-180-534 16 80 National Semiconductor Hong Kong Ltd. 13th Floor, Straight Block, Ocean Centre, 5 Canton Rd. Tsimshatsui, Kowloon Hong Kong Tel: (852) 2737-1600 Fax: (852) 2736-9960 National Semiconductor Japan Ltd. Tel: 81-043-299-2309 Fax: 81-043-299-2408 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.