CMF3, CMF6 Power entry modules without line filter www.schurter.com/pg05 IEC Appliance Inlet C6 with Line Switch 1-pole CMF3 C6 70° C Description -Panel Mount: Screw-on mounting on PCB, from top or bottom -2 Functions: Appliance Inlet Protection class I, Line Switch 1‑pole -For PCB mounting -Alternative: protection class II version CMF1, CMF4; CMF2, CMF5 Characteristics -Easy mounting with center bolt and snapper or srewed on PCB or housing -Electrical connection done on the PCB -Bi-positioning of the switch from left or right side, Standard CMF with switch on right side -With or without rear-side insulation cover -Qualified for use in equipment according IEC/EN 60950 Other versions on request -Line switch with other rocker marking -Line switch on left of inlet References General Product Information Weblinks Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, Distributor-Stock-Check, Accessories Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temp. Degree of Protection Protection Class Terminal Material: Housing 2.5 A / 250 VAC; 50 Hz 6 A / 125 VAC; 60 Hz > 2.3 kVAC between L-N > 2.8 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class 1 acc. to IEC 61140 PCB 1.6 mm Additional ground terminal Thermoplastic, black, UL 94V-0 Appliance Inlet Line Switch Connectors C6 acc. to IEC/EN 60320-1, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 2.5 A, Protection Class 1 Rocker switch 1-pole, non-illuminated, acc. to IEC 61058-1 Technical details CMF3, CMF6 Power entry modules without line filter www.schurter.com/pg05 Dimensions 53.3 mm 24.3 53.3 2.3 26.65 26.65 22.3 2.3 0.9 2 3 19 R 1 2.8 1.6 N 4 4 3 9 18 R L 0 0.8 1.05 3 -0.1 2.8 8.6 18.45 0.8 7 8.15 6.16 8 4.15 10 45 ±0.1 27.55 11 3 25.75 2.4 1.3 10.2 8.25 with insulation cover The size of the mounting cut-out can be selected as required. Fixation on PCB or housing from below Fixation on PCB or housing from above +0.30 11 +0.15 14.3 1) M3x12 1) M3x12 0 5.9- 0.1 1) self tapping screw 13 1.6 13.4 9 9 ±0.1 4.2±0.05 11±0.13 1) self tapping screw Drilling diagrams CMF3 (C6) 9.7 10 8.25 7 +0.1 0 +0.1 0 1.6 3 10 3 9.5 5 5 11 3.81 1.6 3 D1 21.6 3.2 23.4 45±0.1 28.05 29.85 Variants Standard CMF with switch on right side Connectors Mounting side Cover C6 from below C6 from below C6 from below C6 from below l C6 from below C6 from below C6 Ground terminal Ground terminal direction Order Number - - CMF3.1032.12 Solder terminal 2.8 x 0.8 mm angled to pin axis CMF3.1033.12 Solder terminal 2.8 x 0.8 mm straight CMF3.1034.12 - - CMF3.1132.12 l Solder terminal 2.8 x 0.8 mm angled to pin axis CMF3.1133.12 l Solder terminal 2.8 x 0.8 mm straight CMF3.1134.12 from top - - CMF3.1012.12 C6 from top Solder terminal 2.8 x 0.8 mm angled to pin axis CMF3.1013.12 C6 from top Solder terminal 2.8 x 0.8 mm straight CMF3.1014.12 C6 from top l - - CMF3.1112.12 C6 from top l Solder terminal 2.8 x 0.8 mm angled to pin axis CMF3.1113.12 C6 from top l Solder terminal 2.8 x 0.8 mm straight CMF3.1114.12 Connectors Power entry modules without line filter CMF3, CMF6 www.schurter.com/pg05 Packaging unit 50 Pcs Mating Outlets/Connectors Category / Description Power Cord Overview complete Power Cord with IEC Connector C5, Angled 2512 Power Cord with IEC Connector C5, Straight 2530 Power Cord further types to CMF3, CMF6 The specifications, descriptions and illustrations indicated in this document are based on Connectors current information. All content is subject to modifications and amendments.