UNISONIC TECHNOLOGIES CO., LTD 12N06 Preliminary Power MOSFET 12 Amps, 60 Volts N-CHANNEL POWER MOSFET DESCRIPTION 1 The UTC UT12N06 is an N-channel mode Power MOSFET using UTC’s advanced technology to provide customers with minimum on-state resistance with extremely high dense cell design, rugged avalanche characteristics and less critical alignment steps . TO-252 FEATURES * VDS(V)= 60V * ID =12A * RDS(on) < 0.10Ω @VGS = 10 V * RDS(on) < 0.12Ω @VGS = 5.0 V * High switching speed * Low gate charge SYMBOL 2.Drain 1.Gate 3.Source ORDERING INFORMATION Ordering Number Lead Free Halogen Free 12N06L-TN3-R 12N06G-TN3-R www.unisonic.com.tw Copyright © 2011 Unisonic Technologies Co., Ltd Package TO-252 1 G Pin Assignment 2 3 D S Packing Tape Reel 1 of 5 QW-R502-561.a 12N06 Preliminary Power MOSFET ABSOLUTE MAXIMUM RATINGS(TC = 25°C, unless otherwise specified) PARAMETER Drain-Source Voltage (VGS=0) Drain-Gate Voltage (RGS=20KΩ)) Gate-Source Voltage RATINGS UNIT 60 V 60 V ±20 V TC = 25°C 12 A ID Continuous Drain Current TC = 100°C 8.5 A Pulsed (Note 2) IDM 48 A Power Dissipation PD 30 W Derating Factor 0.2 W/°C Peak Diode Recovery dv/dt (Note 3) dv/dt 15 V/ns Avalanche Energy (Note 4) EAS 100 mJ Junction Temperature TJ +150 °C Storage Temperature TSTG -55~+150 °C Note: 1 Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. Pulse width limited by safe operating area 3. ISD ≤ 12A, di/dt ≤ 200A/µs, VDS ≤ 40V, TJ ≤ TJMAX 4. Starting TJ = 25°C, ID = 6A, VDD = 30V SYMBOL VDSS VDGR VGSS THERMAL CHARACTERISTICS PARAMETER Junction to Ambient Junction to Case UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw SYMBOL θJA θJC RATINGS 100 5 UNIT °C/W °C/W 2 of 5 QW-R502-561.a 12N06 Preliminary Power MOSFET ELECTRICAL CHARACTERISTICS (TCASE=25°C, unless otherwise specified) PARAMETER OFF CHARACTERISTICS Drain-Source Breakdown Voltage Drain-Source Leakage Current Forward Gate- Source Leakage Current Reverse ON CHARACTERISTICS Gate Threshold Voltage SYMBOL Static Drain-Source On-State Resistance RDS(ON) BVDSS IDSS IGSS VGS(TH) TEST CONDITIONS ID=25mA, VGS=0V VDS=Max rating, VGS=0V VGS=+20V, VDS=0V VGS=-20V, VDS=0V 60 VDS=VGS, ID=250µA VGS=10V, ID=6A VGS=5V, ID=6A 1 DYNAMIC PARAMETERS Input Capacitance CISS VGS=0V, VDS=25V, f=1.0MHz Output Capacitance COSS Reverse Transfer Capacitance CRSS SWITCHING PARAMETERS (Note 1,2) Total Gate Charge QG VGS=5V, VDD=48V, ID=12A Gate to Source Charge QGS Gate to Drain Charge QGD Turn-ON Delay Time tD(ON) VDD=30V, ID=6A, RG=4.7Ω, Rise Time tR VGS=4.5V (Figure 1.) Turn-OFF Delay Time tD(OFF) Fall-Time tF SOURCE- DRAIN DIODE RATINGS AND CHARACTERISTICS Maximum Body-Diode Continuous Current IS Maximum Body-Diode Pulsed Current ISM Drain-Source Diode Forward Voltage VSD IS=12A, VGS=0V (Note 1) Body Diode Reverse Recovery Time tRR IS=12A, VDD=16V, di/dt=100A/µs Body Diode Reverse Recovery Charge QRR TJ=150°C (Figure 3.) Body Diode Reverse Recovery Current IRRM Notes: 1. Pulsed: pulse duration=300µs, duty cycle 1.5% 2. Essentially independent of operating temperature UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX UNIT V 1 µA +100 nA -100 nA 3 0.08 0.10 0.10 0.12 V Ω Ω 350 75 30 pF pF pF 7.5 2.5 3.0 10 35 20 13 50 65 2.5 10 nC nC nC ns ns ns ns 12 48 A A 1.5 V ns µC A 3 of 5 QW-R502-561.a 12N06 Preliminary Power MOSFET TEST CIRCUITS AND WAVEFORMS VDD D D. U. T G S 25Ω A A FAST DIODE B B RG + VDD A L=100µH 1000µF VD 3.3µF D S - Figure 3. Test Circuit for Inductive Load Switching and Diode Recovery Times UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2200µF ID D. U. T G 3.3µF L B VI D. U. T PW Figure 4. Unclamped Inductive Load Test Circuit 4 of 5 QW-R502-561.a 12N06 Preliminary Power MOSFET UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R502-561.a