VISHAY 151RLH_12

Not for New Design
151 RLH
www.vishay.com
Vishay BCcomponents
Aluminum Capacitors
Radial Long-Life, High Voltage
FEATURES
•
•
•
•
•
044 RSH
85 ° C
151 RLH
105 °C
miniaturized
152 RMH
low
voltage
148 RUS
miniaturized
APPLICATIONS
• High-reliability and professional applications
• Lighting, monitors, consumer electronics,
industrial
• Filtering of high voltages in power supplies
048 RML
Fig. 1
QUICK REFERENCE DATA
DESCRIPTION
Nominal case sizes
(Ø D x L in mm)
Rated capacitance range, CR
Tolerance on CR
Rated voltage range, UR
Category temperature range
Endurance test at 105 °C
Useful life at 105 °C:
Case Ø D = 10 mm and 12.5 mm
Case Ø D = 16 mm and 18 mm
Useful life at 40 °C,
1.6 x IR applied:
Case Ø D = 10 mm and 12.5 mm
Case Ø D = 16 mm and 18 mm
Shelf life at 0 V, 105 °C
Based on sectional specification
Climatic category IEC 60068
Long useful life: 3000 h to 4000 h at 105 °C
High reliability
High rated voltage, up to 450 V
Charge and discharge proof
Polarized aluminum electrolytic capacitors, non-solid
electrolyte
• Radial leads, cylindrical aluminum case, insulated with a
blue sleeve
• Pressure relief
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
VALUE
10 x 12 to 18 x 35
2.2 μF to 220 μF
± 20 %
160 V to 450 V
- 40 °C to + 105 °C
2000 h
3000 h
4000 h
200 000 h
260 000 h
500 h
IEC 60384-4/EN130300
40/105/56
general
MARKING
The capacitors are marked (where possible) with the
following information:
• Rated capacitance value (in μF)
• Tolerance on rated capacitance, code letter in accordance
with IEC 60062 (M for ± 20 %)
• Rated voltage (in V)
• Date code, in accordance with IEC 60062
• Code indicating factory of origin
• Name of manufacturer
• Upper category temperature (105 °C)
• Negative terminal identification
• Series number (151)
SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)
CR
(μF)
2.2
3.3
4.7
10
22
33
47
100
220
Revision: 31-Jul-12
UR (V)
160
10 x 16
10 x 20
12.5 x 20
12.5 x 25
16 x 20
16 x 25
18 x 20
18 x 35
200
10 x 12
10 x 16
10 x 20
12.5 x 20
12.5 x 25
16 x 20
16 x 31
18 x 25
-
250
10 x 12
10 x 20
12.5 x 25
16 x 20
12.5 x 25
16 x 20
16 x 25
18 x 20
16 x 31
18 x 25
-
350
10 x 12
10 x 16
12.5 x 20
12.5 x 25
16 x 20
16 x 25
16 x 35
18 x 31
-
400
10 x 12
10 x 16
10 x 20
12.5 x 20
16 x 25
18 x 20
16 x 31
18 x 25
18 x 31
-
450
10 x 16
10 x 20
12.5 x 20
16 x 20
16 x 31
18 x 25
18 x 35
-
Document Number: 28319
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not for New Design
151 RLH
www.vishay.com
Vishay BCcomponents
DIMENSIONS in millimeters AND AVAILABLE FORMS
ØD
ØD
F
ØD
15
min.
4 +- 01
ØD
5 min.
F
Fig. 2 - Form CA: Long leads
Fig. 3 - Form CB: Cut leads
Fig. 4 - Form TFA: Taped in box (ammopack)
Table 1
DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES
NOMINAL
CASE SIZE
ØDxL
CASE
CODE
Ød
Ø Dmax.
Lmax.
F
MASS
(g)
PACKAGING QUANTITIES
PER BOX
FORM
CA
FORM
CB
FORM
TFA
10 x 12
14
0.6
10.5
13.5
5.0 ± 0.5
 1.6
1000
500
800
10 x 16
15
0.6
10.5
17.5
5.0 ± 0.5
 1.9
500
500
800
10 x 20
16
0.6
10.5
22.0
5.0 ± 0.5
 2.2
500
500
800
12.5 x 20
17
0.6
13.0
22.0
5.0 ± 0.5
4.0
500
500
500
12.5 x 25
18
0.6
13.0
27.0
5.0 ± 0.5
 5.0
250
250
500
16 x 20
19 a
0.8
16.5
22.0
7.5 ± 0.5
 6.0
250
250
250
16 x 25
19
0.8
16.5
27.0
7.5 ± 0.5
8.0
250
250
250
16 x 31
20
0.8
16.5
33.5
7.5 ± 0.5
9.0
100
100
250
16 x 35
21
0.8
16.5
37.5
7.5 ± 0.5
 11.0
100
100
-
18 x 20
1820
0.8
18.5
22.0
7.5 ± 0.5
 8.0
100
100
-
18 x 25
1825
0.8
18.5
27.0
7.5 ± 0.5
 10.0
100
100
18 x 31
1831
0.8
18.5
33.5
7.5 ± 0.5
12.5
100
100
-
18 x 35
22
0.8
18.5
37.5
7.5 ± 0.5
 14.5
100
100
-
Revision: 31-Jul-12
Document Number: 28319
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not for New Design
151 RLH
www.vishay.com
Vishay BCcomponents
ORDERING EXAMPLE
ELECTRICAL DATA
SYMBOL
Electrolytic capacitor 151 series
DESCRIPTION
CR
Rated capacitance at 100 Hz, tolerance ± 20 %
4.7 μF/400 V; ± 20 %
IR
Rated RMS ripple current at 100 Hz, 105 °C
Nominal case size: Ø 10 mm x 20 mm; Form TFA
Max. leakage current after 1 min at UR
Ordering code: MAL215136478E3
Former 12NC: 2222 151 36478
IL1
tan 
Max. dissipation factor at 100 Hz
Z
Max. impedance at 10 kHz
Note
• Unless otherwise specified, all electrical values in Table 2 apply
at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %.
Table 2
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
160
200
250
350
CR
100 Hz
(μF)
NOMINAL
CASE SIZE
ØDxL
(mm)
IR
100 Hz
105 °C
(mA)
IL1
1 min
(μA)
tan 
100 Hz
Z
10 kHz
()
ORDERING CODE
MAL2151.......
BULK PACKAGING
FORM CA
FORM CB
TAPED
FORM TFA
10
10 x 16
95
118
0.12
6.3
51109E3
61109E3
31109E3
22
10 x 20
145
176
0.12
3.2
51229E3
61229E3
31229E3
33
12.5 x 20
190
228
0.12
2.3
51339E3
61339E3
31339E3
47
12.5 x 25
280
296
0.12
1.7
51479E3
61479E3
31479E3
47
16 x 20
280
296
0.12
1.7
91475E3
91476E3
91473E3
100
16 x 25
380
550
0.12
1.1
51101E3
61101E3
31101E3
100
18 x 20
380
550
0.12
1.1
91105E3
91106E3
-
220
18 x 35
630
1126
0.12
0.8
51221E3
61221E3
-
4.7
10 x 12
60
96
0.12
13.0
52478E3
62478E3
32478E3
10
10 x 16
95
130
0.12
6.3
52109E3
62109E3
32109E3
22
10 x 20
145
202
0.12
3.2
52229E3
62229E3
32229E3
33
12.5 x 20
190
268
0.12
2.3
52339E3
62339E3
32339E3
47
12.5 x 25
280
352
0.12
1.7
52479E3
62479E3
32479E3
47
16 x 20
280
352
0.12
1.7
92475E3
92476E3
92473E3
100
16 x 31
410
670
0.12
1.1
52101E3
62101E3
32101E3
100
18 x 25
410
670
0.12
1.1
92105E3
92106E3
-
4.7
10 x 12
60
105
0.12
13.0
53478E3
63478E3
33478E3
10
10 x 20
105
145
0.12
6.3
53109E3
63109E3
33109E3
22
12.5 x 25
180
235
0.12
3.2
53229E3
63229E3
33229E3
22
16 x 20
180
235
0.12
3.2
93225E3
93226E3
93223E3
33
12.5 x 25
250
318
0.12
2.3
53339E3
63339E3
33339E3
33
16 x 20
250
318
0.12
2.3
93335E3
93336E3
93333E3
47
16 x 25
300
423
0.12
1.7
53479E3
63479E3
33479E3
47
18 x 20
300
423
0.12
1.7
93475E3
93476E3
-
100
16 x 31
410
820
0.12
1.1
53101E3
63101E3
33101E3
100
18 x 25
410
820
0.12
1.1
93105E3
93106E3
-
3.3
10 x 12
50
105
0.15
22.0
55338E3
65338E3
35338E3
4.7
10 x 16
65
119
0.15
16.0
55478E3
65478E3
35478E3
10
12.5 x 20
120
175
0.15
7.6
55109E3
65109E3
35109E3
22
12 .5 x 25
180
301
0.15
3.8
55229E3
65229E3
35229E3
22
16 x 20
180
301
0.15
3.8
95225E3
95226E3
95223E3
33
16 x 25
210
417
0.15
2.6
55339E3
65339E3
35339E3
47
16 x 35
300
564
0.15
2.0
55479E3
65479E3
-
47
18 x 31
300
564
0.15
2.0
95475E3
95476E3
-
Revision: 31-Jul-12
Document Number: 28319
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not for New Design
151 RLH
www.vishay.com
Vishay BCcomponents
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
IR
100 Hz
105 °C
(mA)
IL1
1 min
(μA)
10 x 12
40
93
0.15
33.0
3.3
10 x 16
50
110
0.15
22.0
56338E3
66338E3
36338E3
4.7
10 x 20
70
126
0.15
16.0
56478E3
66478E3
36478E3
10
12.5 x 20
120
190
0.15
7.6
56109E3
66109E3
36109E3
22
16 x 25
200
334
0.15
3.8
56229E3
66229E3
36229E3
22
18 x 20
200
334
0.15
3.8
96225E3
96226E3
-
33
16 x 31
245
466
0.15
2.6
56339E3
66339E3
36339E3
2.2
400
450
ORDERING CODE
MAL2151.......
NOMINAL
CASE SIZE
ØDxL
(mm)
CR
100 Hz
(μF)
tan 
100 Hz
Z
10 kHz
()
BULK PACKAGING
TAPED
FORM CA
FORM CB
FORM TFA
56228E3
66228E3
36228E3
33
18 x 25
245
466
0.15
2.6
96335E3
96336E3
-
47
18 x 31
300
634
0.15
2.0
56479E3
66479E3
-
2.2
10 x 16
45
99
0.2
43.0
57228E3
67228E3
37228E3
3.3
10 x 20
65
115
0.2
29.0
57338E3
67338E3
37338E3
4.7
12.5 x 20
80
133
0.2
20.0
57478E3
67478E3
37478E3
10
16 x 20
140
205
0.2
10.0
57109E3
67109E3
37109E3
22
16 x 31
220
367
0.2
4.6
57229E3
67229E3
37229E3
22
18 x 25
220
367
0.2
4.6
97225E3
97226E3
-
33
18 x 35
280
516
0.2
3.4
57339E3
67339E3
-
ADDITIONAL ELECTRICAL DATA
PARAMETER
CONDITIONS
VALUE
Voltage
IEC 60384-4, subclause 4.14:
Surge voltage
Reverse voltage
UR = 160 V to 250 V
Us  1.15 x UR
UR = 350 V to 400 V
Us  1.10 x UR
IEC 60384-4, subclause 4.15
Urev  1 V
Current
After 1 min at UR:
Leakage current
CV  1000 μC
IL1  0.06 CR x UR + 40 μA
CV > 1000 μC
IL1  0.03 CR x UR + 70 μA
After 5 min at UR:
CV  1000 μC
IL5  0.03 CR x UR + 15 μA
CV > 1000 μC
IL5  0.015 CR x UR + 30 μA
Inductance
Equivalent series inductance (ESL)
Case Ø D = 10 mm
Typ. 16 nH
Case Ø D  12.5 mm
Typ. 18 nH
Calculated from tan max. and CR (see Table 2)
ESR = tan /2f CR
Resistance
Equivalent series resistance (ESR)
Revision: 31-Jul-12
Document Number: 28319
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not for New Design
151 RLH
www.vishay.com
Vishay BCcomponents
RIPPLE CURRENT AND USEFUL LIFE
CCC206
3.8
3.7
IA
IR 3.6
3.5
3.4
3.3
3.2
3.1
3.0
2.8
Lifetime multiplier
2.6
0
1.
2.4
5
1.
0
2.
2.2
0
3.
0
4.
2.0
0
6.
0
8.
1.8
20
30
Useful life at 105 °C and IR applied
Case Ø D = 10 mm and 12.5 mm: 3000 h
Case Ø D = 16 mm and 18 mm: 4000 h
(1)
0
10 0
15 0
20
(1)
1.4
1.2
1.0
0.8
0.5
0.0
60
IA = Actual ripple current at 100 Hz
IR = Rated ripple current at 100 Hz, 105 °C
12
1.6
40
50
60
70
80
90
100
110
Tamb (°C)
Fig. 5 - Multiplier of useful life as a function of ambient temperature and ripple current load
Table 3
MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY
Revision: 31-Jul-12
FREQUENCY (Hz)
IR MULTIPLIER
50
0.75
100
1.00
300
1.20
1000
1.35
3000
1.45
 10 000
1.50
Document Number: 28319
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not for New Design
151 RLH
www.vishay.com
Vishay BCcomponents
Table 4
TEST PROCEDURES AND REQUIREMENTS
TEST
NAME OF TEST
Endurance
REFERENCE
IEC 60384-4/
EN130300
subclause 4.15
PROCEDURE
(quick reference)
REQUIREMENTS
Tamb = 105 °C; UR applied;
2000 h
C/C: ± 20 %
tan   2 x spec. limit
Z  2 x spec. limit
IL5  spec. limit
Useful life
CECC 30301
subclause 1.8.1
Tamb = 105 °C; UR and IR applied;
Case Ø D = 10 mm and 12.5 mm: 3000 h;
Case Ø D = 16 mm and 18 mm: 4000 h
C/C: ± 50 %
tan   3 x spec. limit
Z  3 x spec. limit
IL5  spec. limit
No short or open circuit
Total failure percentage:  1%
Shelf life
(storage at high
temperature)
IEC 60384-4/
EN130300
subclause 4.17
Tamb = 105 °C; no voltage applied;
500 h
After test: UR to be applied for 30 min, 24 h to 48 h
before measurement
C/C: ± 20 %
tan   2 x spec. limit
Z  2 x spec. limit
IL5  2 x spec. limit
Revision: 31-Jul-12
Document Number: 28319
6
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000