Flatpack Two-Way Power Divider 5 - 1000 MHz DSS/DS-327 V2.00 Features ● ● ● FP-2 PIN 0.015 DIA ±0.005 (0.038 ±0.13) 8 PLACES Broadband, IN Phase Divider Low Loss - 0.3 dB Typical Amplitude Balance - 0.05 dB Typical Guaranteed Specifications* (From - 55°C to + 85°C) Part Number Frequency Range Insertion Loss (Less Coupling) 5-500 MHz 500-1000 MHz DS-317 DSS-307 5-1000 MHz 5-1000 MHz 0.5 dB Max 1.0 dB Max 0.5 dB Max 1.0 dB Max 25 dB Min 20 dB Min 20 dB Min 16 dB Min 0.2 dB Max 0.3 dB Max 2° Max 3° Max 2° Max 3° Max 1:3:1 Max 1:5:1 Max 1:4:1 Max 1:6:1 Max Isolation 5-500 MHz 500-1000 MHz 0.312 MIN TYP (7.9 MIN) 1 2 3 4 5 6 7 8 0.385 ± 0.020 (9.8 ± 0.5) 0.080 (2.0) 0.100 (2.5) 0.250 (6.3) 0.51 (12.9 ±0.5) 0.350 (8.9) Amplitude Balance 5-1000 MHz 0.150 MAX (3.8 MAX) 0.060 (1.5) Phase Balance 5-500 MHz 500-1000 MHz Operating Characteristics VSWR(All Ports) 5-500 MHz 500-1000 MHz Dimensions in ( ) are in mm. Unless Otherwise Noted: .xxx = ± 0.010 (.xx = ± 0.25) .xx = ± 0.02 (.x = ± 0.5) WEIGHT (APPROX.): 0.09 OUNCES 2.5 GRAMS Typical Performance Operating Characteristics MIL-STD-883 screening available. Impedance 50 Ohms Nominal Maximum Power Rating or Input Power Internal Load Dissipation 1 Watt Max 0.05 Watt Max Environmental * All specifications apply with 50 ohm source and load impedance. MIL-STD-883 screening available. Pin Configuration DS-327 Ordering Information ∑; P1, Output 'C'; P4, Output 'D'; P8 Case and all other pins ground. ∑; P1, Output 'C'; P2, Output 'D'; P4 P3 and case ground. DSS-327 *All specifications apply with 50 ohm source and load impedance. Ordering Information Part Number DS-327 PIN DSS-327 Package Flatpack Surface Mount See DSS-313 for Outline Drawing M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel. +85 2 2111 8088, Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax +44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. 6-35