Rev. A FEATURES DTIPU45 Series Up to 50 Watts Single, Dual, & Triple Outputs AC/DC Desktop Power Supply APPLICATIONS ● Splash Proof ● Scanners ● Class I Insulation ● LCD Monitors ● Two Year Warranty ● Thermal Printers ● IEC-320-C14 Input Inlet ● Humidity Temperature Meters ● Optional Output Connectors ● Single, Dual, and Triple Outputs ● Over Voltage Protection (Crowbar Design) ● -20°C~+70°C Operating Temperature Range ● Wide Input Voltage Range: 90~264VAC, 47~63Hz ● Input Surge Current, Over Voltage, and Over Load Protection DESCRIPTION The DTIPU45 series of AC/DC switching mode power supplies provide up to 50 watts of continuous output power. Models have a universal input range and are available with single, dual, or triple outputs. Some features include -20°C ~ +70°C operating temperature and input surge current, over voltage, and over load protection. All supplies are UL94V-1 compliant and include an IEC-320-C14 input for worldwide applications. These supplies meet FCC Part-15 class B and CISPR-22 class B emission limits and are designed to comply with UL/c-UL (UL 60950-1), TUV/GS (EN 60950-1), and new CE requirements. All units are 100% burn-in tested. SPECIFICATIONS: DTIPU45 Series All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION INPUT (Vin) Input Voltage Input Frequency Input Current (Low Line) Input Current (High Line) Inrush Current (Low Line) Inrush Current (High Line) Safety Ground Leakage Current Start-Up Time OUTPUT (Vo) Output Voltage Range Load Regulation Line Regulation Output Power Range Output Current Range *Ripple & Noise (peak to peak) Transient Response Hold-Up Time PROTECTION Over Voltage Protection Over Current Protection GENERAL Efficiency Dielectric Withstanding Voltage For Primary to Secondary Dielectric Withstanding Voltage For Primary to Ground Isolation Resistance ENVIRONMENTAL Operating Temperature Storage Temperature Relative Humidity Temperature Coefficient MTBF PHYSICAL Weight TEST CONDITIONS Nom Max Unit 12 26 0.5 1 264 63 1.35 0.8 15 30 0.75 2 VAC Hz A A A A mA s 90 47 Io = Full Load, Vin = 115VAC Io = Full Load, Vin = 230VAC Io = Full Load, 25°C, Cool Start, Vin = 115VAC Io = Full Load, 25°C, Cool Start, Vin = 230VAC Io = Full Load, Vin = 240VAC Io = Full Load, Vin = 100VAC Vin = 230VAC Io = Full Load Vin = 90 to 264VAC Full Load, Vin = 90VAC Io = Full Load to Half Load, Vin = 100VAC Io = Full Load, Vin = 110VAC 0.3 0 See Rating Chart 3 15 0.5 1 50 See Rating Chart 0.5 1 4 16 112 110 Io = Full Load, Vin = 230VAC 75 132 150 83 88 % % W % ms ms % % % Primary to Secondary 4242 VDC Primary to Ground 2121 VDC 50 MΩ Test Voltage = 500VDC Derate linearly from 100% Load at 40°C to 50% load at 70°C All Outputs Operating temperature at 25°C, Calculated per MIL-HDBK-217F -20 -40 5 -0.04 70 85 95 +0.04 100,000 hours °C °C % %/°C Approximately 535 ~ 560 grams 5.75(L) x 2.99(W) x 1.69(H) inches 146.0(L) x 76.0(W) x 43.0(H) mm 2 years Dimensions Warranty SAFETY EMI Requirements for CISPR-22 EMI Requirements for FCC PART-15 Min Vin = 220VAC Vin = 110VAC *Note: The Ripple & Noise for output voltages under 3.3VDC is 2% max. Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 B B Class Class DTIPU45 Series Up to 50 Watts Single, Dual, & Triple Outputs AC/DC Desktop Power Supply Rev. A MODEL SELECTION CHARTS SINGLE OUTPUT MODELS Model Number DTIPU45-100 DTIPU45-101 *DTIPU45-102 *DTIPU45-103 *DTIPU45-104 *DTIPU45-105 *DTIPU45-106 DTIPU45-107 DTIPU45-108 DTIPU45-109 DTIPU45-110 DTIPU45-111 Preset Voltage Output Voltage Range Max. Output Current Total Regulation Max. Output Power 3 VDC 5 VDC 6 VDC 8 VDC 11 VDC 13 VDC 16 VDC 21 VDC 27 VDC 33 VDC 40 VDC 50 VDC 2 ~ 3 VDC 3 ~ 5 VDC 5 ~ 6 VDC 6 ~ 8 VDC 8 ~ 11 VDC 11 ~ 13 VDC 13 ~ 16 VDC 16 ~ 21 VDC 21 ~ 27 VDC 27 ~ 33 VDC 33 ~ 40 VDC 40 ~ 50 VDC 8.00A max. 8.00A max. 8.00 ~ 6.66A 7.00 ~ 5.25A 5.63 ~ 4.00A 4.00 ~ 3.46A 3.46 ~ 2.81A 3.12 ~ 2.38A 2.30 ~ 1.85A 1.85A ~ 1.51A 1.51 ~ 1.25A 1.25 ~ 1.00A 7% 5% 5% 5% 4% 3% 3% 3% 2% 2% 2% 2% 24W 40W 40W 42W 45W 45W 45W 50W 50W 50W 50W 50W Max. Output Power DUAL OUTPUT MODELS Model Number *DTIPU45-200 *DTIPU45-201 *DTIPU45-202 DTIPU45-203 DTIPU45-204 *DTIPU45-209 *DTIPU45-210 DTIPU45-215 DTIPU45-216 Output 1 Output 2 Output 1 Output 2 Output 1 Output 2 Output 1 Output 2 Output 1 Output 2 Output 1 Output 3 Output 1 Output 3 Output 1 Output 3 Output 1 Output 3 Output Voltage Min. Output Current Max. Output Current Max. Regulation +3.3 VDC +12.0 VDC +5.0 VDC +12.0 VDC +5.0 VDC +15.0 VDC +5.0 VDC +24.0 VDC +3.3 VDC +5.0 VDC +12 VDC -12 VDC +15.0 VDC -15.0 VDC +5.0 VDC -24.0 VDC +5.1 VDC +7.2 VDC 0.5A 0.3A 0.5A 0.3A 0.8A 0.3A 0.5A 0.1A 0.5A 0.2A 0.3A 0.1A 0.2A 0.1A 0.5A 0.1A 0A 0.2A 5A 2A 5A 2A 5A 1.5A 5A 1A 5A 2A 3A 1A 2A 1A 5A 1A 1A 2.6A 7% 5% 5% 5% 7% 5% 5% 5% 7% 5% 5% 5% 5% 5% 5% 5% 5% 5% Output Voltage Min. Output Current Max. Output Current Max. Regulation +3.3 VDC +12.0 VDC -12.0 VDC +5.0 VDC +12.0 VDC -5.0 VDC +5.0 VDC +12.0 VDC -12.0 VDC +5.0 VDC +15.0 VDC -15.0 VDC +5.0 VDC +24.0 VDC -24.0 VDC +5.0 VDC +24.0 VDC -12.0 VDC +3.3 VDC +12.0 VDC -5.0 VDC 1.0A 0.3A 0.1A 0.5A 0.2A 0A 0.5A 0.2A 0A 0.5A 0.3A 0A 0.5A 0.2A 0A 0.5A 0.1A 0A 0.5A 0.4A 0A 5A 2A 0.8A 5A 2A 0.8A 5A 2A 0.8A 5A 2A 0.8A 5A 1A 0.5A 5A 1A 0.8A 5A 2A 0.8A 7% 5% 5% 5% 5% 5% 5% 5% 5% 5% 6% 5% 5% 5% 5% 5% 5% 5% 7% 5% 5% 40W 42W 42W 42W 26.5W 42W 42W 42W 23.82W TRIPLE OUTPUT MODELS Model Number *DTIPU45-300 *DTIPU45-301 *DTIPU45-302 *DTIPU45-303 DTIPU45-304 DTIPU45-305 *DTIPU45-306 Output 1 Output 2 Output 3 Output 1 Output 2 Output 3 Output 1 Output 2 Output 3 Output 1 Output 2 Output 3 Output 1 Output 2 Output 3 Output 1 Output 2 Output 3 Output 1 Output 2 Output 3 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Max. Output Power 42W 42W 42W 42W 42W 42W 42W Rev. A DTIPU45 Series Up to 50 Watts Single, Dual, & Triple Outputs AC/DC Desktop Power Supply NOTES 1. For single output models the output voltage is specified as a range (Ex: 40 ~ 50VDC); the preset voltage will be set as standard models if nothing different is requested. Please contact factory for ordering details. 2. The “ * ” symbol means PSE approval. 3. Models with output voltages under 15VDC have been approved by JET/PSE. 4. Optional output connectors are available. Please call factory for ordering details. MECHANICAL DRAWINGS Unit: inches [mm] Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797