FERROXCUBE DATA A SH SHEET EET E14/3.5/5/R Planar E cores and accessories Supersedes data of February 2002 2004 Sep 01 Ferroxcube Planar E cores and accessories E14/3.5/5/R CORES Effective core parameters of an E/PLT combination SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1) 1.15 mm−1 Ve effective volume 230 mm3 Ie effective length 16.4 mm Ae effective area 14.2 mm2 Amin minimum area 10.9 mm2 m mass of E core half ≈ 0.6 g m mass of plate ≈ 0.5 g 14 ±0.3 11 ±0.25 3 ±0.05 handbook, halfpage 2 ±0.1 Ordering information for plates GRADE 2.5 +0.2 5 ±0.1 0 TYPE NUMBER 3C90 PLT14/5/1.5/S-3C90 3C92 PLT14/5/1.5/S-3C92 3C93 PLT14/5/1.5/S-3C93 3C94 PLT14/5/1.5/S-3C94 3C96 PLT14/5/1.5/S-3C96 3F3 PLT14/5/1.5/S-3F3 3F35 PLT14/5/1.5/S-3F35 3F4 PLT14/5/1.5/S-3F4 3F45 PLT14/5/1.5/S-3F45 3E6 PLT14/5/1.5/S-3E6 2.8 ±0.15 3.5 ±0.1 CBW173 Dimensions in mm. Fig.1 E14/3.5/5/R core. 14 ±0.3 1.5 ±0.1 1.8 ±0.05 ook, halfpage 5 ±0.1 2.5 +0.2 0 CBW174 Dimensions in mm. Fig.2 PLT14/5/1.5/S. 2004 Sep 01 2 Ferroxcube Planar E cores and accessories E14/3.5/5/R Core halves for use in combination with a slotted plate (PLT/S) AL measured in combination with a slotted plate (PLT/S) clamping force for AL measurements 10 ±5 N; measurement coil as for E14/3.5/5. GRADE 3C90 AIR GAP (µm) AL (nH) µe 63 ±3% ≈ 58 ≈ 600 E14/3.5/5/R-3C90-A63-P 100 ±5% ≈ 92 ≈ 300 E14/3.5/5/R-3C90-A100-P E14/3.5/5/R-3C90-A160-P 160 ±8% TYPE NUMBER ≈ 148 ≈ 150 1500 ±25% ≈ 1380 ≈0 E14/3.5/5/R-3C90 3C92 1130 ±25% ≈ 1040 ≈0 E14/3.5/5/R-3C92 3C93 1300 ±25% 3C94 ≈ 1200 ≈0 63 ±3% ≈ 58 ≈ 600 E14/3.5/5/R-3C94-A63-P 100 ±5% ≈ 92 ≈ 300 E14/3.5/5/R-3C94-A100-P E14/3.5/5/R-3C94-A160-P 160 ±8% 3C96 3F3 E14/3.5/5/R-3C93 ≈ 148 ≈ 150 1500 ±25% ≈ 1380 ≈0 E14/3.5/5/R-3C94 1350 ±25% ≈ 1240 ≈0 E14/3.5/5/R-3C96 63 ±3% ≈ 58 ≈ 600 E14/3.5/5/R-3F3-A63-P 100 ±5% ≈ 92 ≈ 300 E14/3.5/5/R-3F3-A100-P 160 ±8% ≈ 148 ≈ 150 E14/3.5/5/R-3F3-A160-P 1300 ±25% ≈ 1200 ≈0 1050 ±25% E14/3.5/5/R-3F3 ≈ 970 ≈0 63 ±3% ≈ 58 ≈ 600 E14/3.5/5/R-3F4-A63-P 100 ±5% ≈ 92 ≈ 300 E14/3.5/5/R-3F4-A100-P 160 ±8% ≈ 148 ≈ 150 E14/3.5/5/R-3F4-A160-P 780 ±25% ≈ 710 ≈0 E14/3.5/5/R-3F4 3F45 780 ±25% ≈ 710 ≈0 E14/3.5/5/R-3F45 3E6 6400 +40/−30% ≈ 5900 ≈0 E14/3.5/5/R-3E6 3F35 3F4 2004 Sep 01 3 E14/3.5/5/R-3F35 Ferroxcube Planar E cores and accessories E14/3.5/5/R Properties of core sets under power conditions B (mT) at CORE LOSS (W) at H = 250 A/m; f = 25 kHz; T = 100 °C f = 100 kHz; ˆ = 100 mT; B T = 100 °C f = 100 kHz; ˆ = 200 mT; B T = 100 °C f = 400 kHz; ˆ = 50 mT; B T = 100 °C f = 500 kHz; ˆ = 50 mT; B T = 100 °C E14/R+PLT14/S-3C90 ≥320 ≤ 0.026 − − − E14/R+PLT14/S-3C92 ≥370 ≤ 0.021 ≤ 0.15 − − E14/R+PLT14/S-3C93 ≥320 − − GRADE ≤ ≤ 0.021(1) 0.15(1) E14/R+PLT14/S-3C94 ≥320 ≤ 0.021 ≤ 0.15 − − E14/R+PLT14/S-3C96 ≥340 ≤ 0.016 ≤ 0.12 ≤ 0.045 ≤ 0.09 E14/R+PLT14/S-3F3 ≥300 ≤ 0.027 − ≤ 0.047 − E14/R+PLT14/S-3F35 ≥300 − − ≤ 0.024 ≤ 0.035 E14/R+PLT14/S-3F4 ≥250 − − − − E14/R+PLT14/S-3F45 ≥250 − − − − 1. Measured at 140 °C. Properties of core sets under power conditions (continued) B (mT) at CORE LOSS (W) at H = 250 A/m; f = 25 kHz; T = 100 °C f = 500 kHz; ˆ = 100 mT; B T = 100 °C f = 1 MHz; ˆ = 30 mT; B T = 100 °C f = 1 MHz; ˆ = 50 mT; B T = 100 °C f = 3 MHz; ˆ = 10 mT; B T = 100 °C E14/R+PLT14/S-3C90 ≥320 − − − − E14/R+PLT14/S-3C92 ≥370 − − − − E14/R+PLT14/S-3C93 ≥320 − − − − E14/R+PLT14/S-3C94 ≥320 − − − − E14/R+PLT14/S-3C96 ≥340 − − − − E14/R+PLT14/S-3F3 ≥300 − − − − E14/R+PLT14/S-3F35 ≥300 ≤ 0.027 − − − E14/R+PLT14/S-3F4 ≥250 − ≤ 0.07 − ≤ 0.11 E14/R+PLT14/S-3F45 ≥250 − ≤ 0.05 ≤ 0.12 ≤ 0.085 GRADE 2004 Sep 01 4 Ferroxcube Planar E cores and accessories E14/3.5/5/R MOUNTING PARTS General data and ordering information ITEM Clamp MATERIAL FIGURE stainless steel (CrNi) TYPE NUMBER 3 CLM-E14/PLT14 R 0.75max. 3.2 min. 13.6 5.5 2.2 olumns handbook, halfpage 5.3 2.5 min. min. 0.3 5.4 ±0.1 14 ±0.2 10.6 max. CBW175 14.5 min. CBW550 17.5 min. Dimensions in mm. Dimensions in mm. Fig.4 Fig.3 Clamp for E14/R+PLT14/S. Recommended PCB cut-out for clamped cores. BLISTER TAPE AND REEL For blister tape dimensions and construction and reel dimensions, see data sheet “E14/3.5/5”. 2004 Sep 01 5 Ferroxcube Planar E cores and accessories E14/3.5/5/R DATA SHEET STATUS DEFINITIONS DATA SHEET STATUS PRODUCT STATUS DEFINITIONS Preliminary specification Development This data sheet contains preliminary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Product specification Production This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. DISCLAIMER Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS STATUS INDICATION DEFINITION Prototype These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. Design-in These products are recommended for new designs. Preferred These products are recommended for use in current designs and are available via our sales channels. Support These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability. 2004 Sep 01 6