Aluminum Electrolytic Capacitors/ UP Snap-in Type Series: UP n Features Type : TS Country of Origin Japan Malaysia U.S.A (ii) Endurance: 85°C 2000 h Length 20 mm RoHS directive compliant (ii) Regarding USA product, , Please check PEDCA s Catalog. n Recommended Applications Smoothing circuits, AC adaptor, n Specifications Category temp. range -40 to + 85°C Rated W.V. Range 16 to 250 V .DC 120 to 68000 µ F Nominal Cap. Range -25 to + 85°C 315 to 450 V .DC 33 to 820 µ F ±20 % (120Hz/+20°C) Capacitance Tolerance 3√CV (µA) max. after 5 minutes application of rated working voltage at +20°C. C:Capacitance(µF) V: W.V. (V.DC) Please see the attached standard products list tan δ Frequency (Hz) 50 60 100 120 500 1k 10k to Frequency Correction 0.93 0.95 0.99 1.00 1.05 1.08 1.15 16 to 100V Factor for Ripple Current Correction Factor 0.80 0.95 1.00 1.20 1.25 1.40 160 to 450V 0.75 After 2000 hours application of DC voltage with specified ripple current (< rated DC working voltage) at +85°C, the capacitor shall meet the following limits. Capacitance change ±20 % of initial measured value Endurance tan δ < 200 % of initial specified value DC leakage current < initial specified value DC Leakage Current After storage for 1000 hours at +85±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance.(With voltage treatment) Shelf Life n Dimensions in mm (not to scale) φD+1.0 max Polarity bar (10.0) 2-φ2.0±0.1 PET Sleeve 10.0±0.1 Vent L+2.0 max Recommended PWB piercing plan 4.0 ± 0.5 Terminal +0.2 0.8 - 0.1 (t= 0.8) (3.5) 4.0±0.5 2.0 max Bottom of can 1.5 ± 0.2 Standard terminal type does not require terminal trimming process. Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006 EE174 Aluminum Electrolytic Capacitors/ UP n Standard Products W.V. Cap. (±20%) (V) Case size Dia. Specification Ripple tan δ Length current (120Hz) (120Hz) (+85°C) (+20°C) (mm) (A) Part No. Min.PackagingQ'ty PET sleeve Terminal Length 4.0mm (µF) (mm) 10000 22 30 3.78 0.50 ECEC1CP103BJ 200 25 25 3.78 0.50 ECEC1CP103CJ 200 22 30 4.52 0.50 ECEC1CP123BJ 200 25 25 4.52 0.50 ECEC1CP123CJ 200 22 35 5.26 0.50 ECEC1CP153BJ 200 25 30 5.26 0.50 ECEC1CP153CJ 200 22 40 5.57 0.50 ECEC1CP183BJ 200 25 30 5.57 0.50 ECEC1CP183CJ 200 22 45 6.10 0.50 ECEC1CP223BJ 200 25 35 6.10 0.50 ECEC1CP223CJ 200 12000 15000 18000 22000 (Without P.V.C.plate) (pcs) 30 30 6.10 0.50 ECEC1CP223DJ 200 27000 25 45 6.31 0.50 ECEC1CP273CJ 200 30 35 6.31 0.50 ECEC1CP273DJ 100 33000 25 50 6.84 0.50 ECEC1CP333CJ 200 30 40 6.84 0.50 ECEC1CP333DJ 100 16 35 30 6.84 0.50 ECEC1CP333EJ 200 39000 30 45 6.94 0.56 ECEC1CP393DJ 100 35 35 6.94 0.56 ECEC1CP393EJ 100 47000 30 50 7.47 0.64 ECEC1CP473DJ 100 35 40 7.47 0.64 ECEC1CP473EJ 100 56000 35 45 8.73 0.73 ECEC1CP563EJ 100 68000 35 50 9.05 0.85 ECEC1CP683EJ 100 6800 22 30 3.47 0.40 ECEC1EP682BJ 200 25 25 3.47 0.40 ECEC1EP682CJ 200 8200 22 30 3.57 0.40 ECEC1EP822BJ 200 25 25 3.57 0.40 ECEC1EP822CJ 200 10000 22 35 3.78 0.40 ECEC1EP103BJ 200 25 30 3.78 0.40 ECEC1EP103CJ 200 30 25 3.78 0.40 ECEC1EP103DJ 200 22 40 4.10 0.40 ECEC1EP123BJ 200 25 35 4.10 0.40 ECEC1EP123CJ 200 30 30 4.10 0.40 ECEC1EP123DJ 200 22 50 4.63 0.40 ECEC1EP153BJ 200 25 40 4.63 0.40 ECEC1EP153CJ 200 12000 25 15000 30 30 4.63 0.40 ECEC1EP153DJ 200 18000 25 45 5.47 0.40 ECEC1EP183CJ 200 30 35 5.47 0.40 ECEC1EP183DJ 100 22000 25 50 6.10 0.40 ECEC1EP223CJ 200 30 40 6.10 0.40 ECEC1EP223DJ 100 27000 30 45 6.21 0.40 ECEC1EP273DJ 100 35 35 6.21 0.40 ECEC1EP273EJ 100 30 50 6.84 0.40 ECEC1EP333DJ 100 33000 Endurance : 85°C 2000h Terminal Pitch : 10mm When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006 EE175 Aluminum Electrolytic Capacitors/ UP n Standard Products W.V. Cap. (±20%) (V) 25 Case size Dia. Specification Length Ripple current tan δ (120Hz) (120Hz) (+85°C) (+20°C) (mm) (A) Part No. Min.Packaging Q'ty PET sleeve Terminal Length 4.0mm (µF) (mm) 33000 35 40 6.84 0.40 ECEC1EP333EJ 100 39000 35 45 7.36 0.46 ECEC1EP393EJ 100 47000 35 50 8.00 0.54 ECEC1EP473EJ 100 4700 22 30 3.26 0.35 ECEC1VP472BJ 200 25 25 3.26 0.35 ECEC1VP472CJ 200 5600 22 30 3.36 0.35 ECEC1VP562BJ 200 25 25 3.36 0.35 ECEC1VP562CJ 200 6800 22 35 3.68 0.35 ECEC1VP682BJ 200 25 30 3.68 0.35 ECEC1VP682CJ 200 8200 22 40 4.00 0.35 ECEC1VP822BJ 200 25 35 4.00 0.35 ECEC1VP822CJ 200 10000 22 45 4.42 0.35 ECEC1VP103BJ 200 25 40 4.42 0.35 ECEC1VP103CJ 200 30 30 4.42 0.35 ECEC1VP103DJ 200 35 (Without P.V.C.plate) (pcs) 35 25 4.42 0.35 ECEC1VP103EJ 200 25 45 5.05 0.35 ECEC1VP123CJ 200 30 35 5.05 0.35 ECEC1VP123DJ 100 35 30 5.05 0.35 ECEC1VP123EJ 200 25 50 5.57 0.35 ECEC1VP153CJ 200 30 40 5.57 0.35 ECEC1VP153DJ 100 35 30 5.57 0.35 ECEC1VP153EJ 200 30 45 5.68 0.35 ECEC1VP183DJ 100 35 35 5.68 0.35 ECEC1VP183EJ 100 30 50 6.10 0.35 ECEC1VP223DJ 100 35 40 6.10 0.35 ECEC1VP223EJ 100 27000 35 45 6.84 0.35 ECEC1VP273EJ 100 33000 35 50 7.15 0.35 ECEC1VP333EJ 100 12000 15000 18000 22000 3300 3900 4700 50 5600 6800 8200 22 30 2.73 0.30 ECEC1HP332BJ 200 25 25 2.73 0.30 ECEC1HP332CJ 200 22 30 2.75 0.30 ECEC1HP392BJ 200 25 25 2.75 0.30 ECEC1HP392CJ 200 22 35 3.03 0.30 ECEC1HP472BJ 200 25 30 3.03 0.30 ECEC1HP472CJ 200 30 25 3.03 0.30 ECEC1HP472DJ 200 22 40 3.42 0.30 ECEC1HP562BJ 200 25 35 3.42 0.30 ECEC1HP562CJ 200 30 30 3.42 0.30 ECEC1HP562DJ 200 22 50 3.85 0.30 ECEC1HP682BJ 200 25 40 3.85 0.30 ECEC1HP682CJ 200 30 30 3.85 0.30 ECEC1HP682DJ 200 25 45 4.41 0.30 ECEC1HP822CJ 200 30 35 4.41 0.30 ECEC1HP822DJ 100 Endurance : 85°C 2000h Terminal Pitch : 10mm When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006 EE176 Aluminum Electrolytic Capacitors/ UP n Standard Products W.V. Cap. (±20%) (V) 50 Dia. Specification Length Ripple current tan δ (120Hz) (120Hz) (+85°C) (+20°C) (mm) (A) Part No. Min.Packaging Q'ty PET sleeve Terminal Length 4.0mm (pcs) (µF) (mm) 10000 25 50 4.97 0.30 ECEC1HP103CJ 200 30 40 4.97 0.30 ECEC1HP103DJ 100 35 30 4.97 0.30 ECEC1HP103EJ 200 12000 15000 (Without P.V.C. plate) 30 45 5.58 0.30 ECEC1HP123DJ 100 35 35 5.58 0.30 ECEC1HP123EJ 100 30 50 6.44 0.30 ECEC1HP153DJ 100 35 40 6.44 0.30 ECEC1HP153EJ 100 18000 35 45 6.94 0.30 ECEC1HP183EJ 100 22000 35 50 7.57 0.30 ECEC1HP223EJ 100 2200 22 30 2.52 0.25 ECEC1JP222BJ 200 25 25 2.52 0.25 ECEC1JP222CJ 200 22 35 3.73 0.25 ECEC1JP272BJ 200 25 30 3.73 0.25 ECEC1JP272CJ 200 22 40 4.10 0.25 ECEC1JP332BJ 200 25 30 4.10 0.25 ECEC1JP332CJ 200 2700 3300 3900 4700 63 5600 6800 8200 10000 30 25 4.10 0.25 ECEC1JP332DJ 200 22 45 4.44 0.25 ECEC1JP392BJ 200 25 35 4.44 0.25 ECEC1JP392CJ 200 30 30 4.44 0.25 ECEC1JP392DJ 200 22 50 4.86 0.25 ECEC1JP472BJ 200 25 40 4.86 0.25 ECEC1JP472CJ 200 30 30 4.86 0.25 ECEC1JP472DJ 200 35 25 4.86 0.25 ECEC1JP472EJ 200 25 45 5.36 0.25 ECEC1JP562CJ 200 30 35 5.36 0.25 ECEC1JP562DJ 100 35 30 5.36 0.25 ECEC1JP562EJ 200 25 50 5.84 0.25 ECEC1JP682CJ 200 30 40 5.84 0.25 ECEC1JP682DJ 100 35 30 5.84 0.25 ECEC1JP682EJ 200 30 45 6.00 0.25 ECEC1JP822DJ 100 35 35 6.00 0.25 ECEC1JP822EJ 100 35 40 6.52 0.25 ECEC1JP103EJ 100 12000 35 50 7.15 0.25 ECEC1JP123EJ 100 1500 22 30 2.26 0.20 ECEC1KP152BJ 200 25 25 2.26 0.20 ECEC1KP152CJ 200 22 35 2.52 0.20 ECEC1KP182BJ 200 25 30 2.52 0.20 ECEC1KP182CJ 200 1800 80 Case size 2200 2700 22 40 2.73 0.20 ECEC1KP222BJ 200 25 30 2.73 0.20 ECEC1KP222CJ 200 30 25 2.73 0.20 ECEC1KP222DJ 200 22 45 2.78 0.20 ECEC1KP272BJ 200 25 35 2.78 0.20 ECEC1KP272CJ 200 Endurance : 85°C 2000h Terminal Pitch : 10mm When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006 EE177 Aluminum Electrolytic Capacitors/ UP n Standard Products W.V. Cap. (±20%) (V) Part No. Min.PackagingQ'ty PET sleeve Terminal Length 4.0mm (mm) 2700 30 30 2.78 0.20 ECEC1KP272DJ 200 3300 22 50 3.21 0.20 ECEC1KP332BJ 200 25 40 3.21 0.20 ECEC1KP332CJ 200 30 30 3.21 0.20 ECEC1KP332DJ 200 25 45 3.59 0.20 ECEC1KP392CJ 200 30 35 3.59 0.20 ECEC1KP392DJ 100 25 50 4.09 0.20 ECEC1KP472CJ 200 30 40 4.09 0.20 ECEC1KP472DJ 100 5600 30 45 4.55 0.20 ECEC1KP562DJ 100 35 35 4.55 0.20 ECEC1KP562EJ 100 6800 30 50 5.16 0.20 ECEC1KP682DJ 100 35 40 5.16 0.20 ECEC1KP682EJ 100 8200 35 50 5.83 0.20 ECEC1KP822EJ 100 1000 22 30 1.96 0.20 ECEC2AP102BJ 200 25 25 1.96 0.20 ECEC2AP102CJ 200 22 35 2.31 0.20 ECEC2AP122BJ 200 25 30 2.31 0.20 ECEC2AP122CJ 200 22 40 2.57 0.20 ECEC2AP152BJ 200 25 30 2.57 0.20 ECEC2AP152CJ 200 4700 1200 1500 1800 2200 100 (Without P.V.C. plate) (pcs) 30 25 2.57 0.20 ECEC2AP152DJ 200 22 45 2.84 0.20 ECEC2AP182BJ 200 25 35 2.84 0.20 ECEC2AP182CJ 200 30 30 2.84 0.20 ECEC2AP182DJ 200 22 50 3.14 0.20 ECEC2AP222BJ 200 25 40 3.14 0.20 ECEC2AP222CJ 200 30 30 3.14 0.20 ECEC2AP222DJ 200 25 45 3.71 0.20 ECEC2AP272CJ 200 30 35 3.71 0.20 ECEC2AP272DJ 100 25 50 4.06 0.20 ECEC2AP332CJ 200 30 40 4.06 0.20 ECEC2AP332DJ 100 30 45 4.54 0.20 ECEC2AP392DJ 100 35 35 4.54 0.20 ECEC2AP392EJ 100 30 50 5.13 0.20 ECEC2AP472DJ 100 35 40 5.13 0.20 ECEC2AP472EJ 100 5600 35 45 5.75 0.20 ECEC2AP562EJ 100 6800 35 50 6.60 0.20 ECEC2AP682EJ 100 330 22 25 1.45 0.15 ECEC2CP331BJ 200 390 22 30 1.62 0.15 ECEC2CP391BJ 200 25 25 1.62 0.15 ECEC2CP391CJ 200 22 30 2.11 0.15 ECEC2CP471BJ 200 25 25 2.11 0.15 ECEC2CP471CJ 200 22 35 2.25 0.15 ECEC2CP561BJ 200 2700 3300 3900 4700 160 Dia. Specification Length Ripple current tan δ (120Hz) (120Hz) (+85°C) (+20°C) (mm) (A) (µF) 3900 80 Case size 470 560 Endurance : 85°C 2000h Terminal Pitch : 10mm When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006 EE178 Aluminum Electrolytic Capacitors/ UP n Standard Products W.V. Cap. (±20%) (V) Dia. Specification Ripple Length current tan δ (120Hz) (120Hz) (+85°C) (+20°C) (mm) (A) (µF) (mm) 560 25 30 2.25 30 25 2.25 22 40 2.50 25 35 2.50 30 25 22 25 680 820 Part No. Min.PackagingQ'ty PET sleeve Terminal Length 4.0mm (Without P.V.C.plate) (pcs) 0.15 ECEC2CP561CJ 200 0.15 ECEC2CP561DJ 200 0.15 ECEC2CP681BJ 200 0.15 ECEC2CP681CJ 200 2.50 0.15 ECEC2CP681DJ 200 45 2.75 0.15 ECEC2CP821BJ 200 35 2.75 0.15 ECEC2CP821CJ 200 30 30 2.75 0.15 ECEC2CP821DJ 200 25 45 3.00 0.15 ECEC2CP102CJ 200 30 35 3.00 0.15 ECEC2CP102DJ 100 35 30 3.00 0.15 ECEC2CP102EJ 200 25 50 3.25 0.15 ECEC2CP122CJ 200 30 35 3.25 0.15 ECEC2CP122DJ 100 35 30 3.25 0.15 ECEC2CP122EJ 200 30 45 3.73 0.15 ECEC2CP152DJ 100 35 35 3.73 0.15 ECEC2CP152EJ 100 30 50 4.20 0.15 ECEC2CP182DJ 100 35 40 4.20 0.15 ECEC2CP182EJ 100 2200 35 45 4.78 0.15 ECEC2CP222EJ 100 2700 35 50 5.45 0.15 ECEC2CP272EJ 100 330 22 25 1.77 0.15 ECEC2PP331BJ 200 390 22 30 1.91 0.15 ECEC2PP391BJ 200 470 25 22 25 35 1.91 2.08 0.15 0.15 ECEC2PP391CJ ECEC2PP471BJ 200 200 25 25 2.08 0.15 ECEC2PP471CJ 200 22 35 2.25 0.15 ECEC2PP561BJ 200 25 30 2.25 0.15 ECEC2PP561CJ 200 22 40 2.50 0.15 ECEC2PP681BJ 200 25 35 2.50 0.15 ECEC2PP681CJ 200 30 30 2.50 0.15 ECEC2PP681DJ 200 22 45 2.75 0.15 ECEC2PP821BJ 200 25 40 2.75 0.15 ECEC2PP821CJ 200 1000 160 1200 1500 1800 560 680 180 Case size 820 30 30 2.75 0.15 ECEC2PP821DJ 200 1000 25 45 3.00 0.15 ECEC2PP102CJ 200 30 35 3.00 0.15 ECEC2PP102DJ 100 1200 25 50 3.31 0.15 ECEC2PP122CJ 200 30 40 3.31 0.15 ECEC2PP122DJ 100 35 35 3.31 0.15 ECEC2PP122EJ 100 1500 30 45 3.83 0.15 ECEC2PP152DJ 100 35 40 3.83 0.15 ECEC2PP152EJ 100 1800 30 50 4.32 0.15 ECEC2PP182DJ 100 35 40 4.32 0.15 ECEC2PP182EJ 100 Endurance : 85°C 2000h Terminal Pitch : 10mm When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006 EE179 Aluminum Electrolytic Capacitors/ UP n Standard Products W.V. Cap. (±20%) Case size Dia. Specification Length Ripple current tan δ (120Hz) (120Hz) (+85°C) (+20°C) (mm) (A) Part No. Min.Packaging Q'ty PET sleeve Terminal Length 4.0mm (V) (µF) (mm) 180 2200 35 50 4.92 0.15 ECEC2PP222EJ 100 270 22 25 1.41 0.15 ECEC2DP271BJ 200 330 22 30 1.56 0.15 ECEC2DP331BJ 200 25 25 1.56 0.15 ECEC2DP331CJ 200 390 470 560 200 680 820 (Without P.V.C. plate) (pcs) 22 30 1.68 0.15 ECEC2DP391BJ 200 25 25 1.68 0.15 ECEC2DP391CJ 200 22 35 1.85 0.15 ECEC2DP471BJ 200 25 30 1.85 0.15 ECEC2DP471CJ 200 30 25 1.85 0.15 ECEC2DP471DJ 200 22 40 2.43 0.15 ECEC2DP561BJ 200 25 35 2.43 0.15 ECEC2DP561CJ 200 30 25 2.43 0.15 ECEC2DP561DJ 200 22 45 2.68 0.15 ECEC2DP681BJ 200 25 35 2.68 0.15 ECEC2DP681CJ 200 30 30 2.68 0.15 ECEC2DP681DJ 200 25 45 2.93 0.15 ECEC2DP821CJ 200 30 35 2.93 0.15 ECEC2DP821DJ 100 35 25 2.93 0.15 ECEC2DP821EJ 200 25 50 3.25 0.15 ECEC2DP102CJ 200 30 40 3.25 0.15 ECEC2DP102DJ 100 35 30 3.25 0.15 ECEC2DP102EJ 200 30 45 3.50 0.15 ECEC2DP122DJ 100 35 35 3.50 0.15 ECEC2DP122EJ 100 30 50 3.87 0.15 ECEC2DP152DJ 100 35 40 3.87 0.15 ECEC2DP152EJ 100 1800 35 45 4.32 0.15 ECEC2DP182EJ 100 2200 35 50 4.92 0.15 ECEC2DP222EJ 100 180 22 25 1.07 0.15 ECEC2EP181BJ 200 1000 1200 1500 220 270 330 250 390 470 560 22 30 1.17 0.15 ECEC2EP221BJ 200 25 25 1.17 0.15 ECEC2EP221CJ 200 22 30 1.31 0.15 ECEC2EP271BJ 200 25 25 1.31 0.15 ECEC2EP271CJ 200 22 35 1.75 0.15 ECEC2EP331BJ 200 25 30 1.75 0.15 ECEC2EP331CJ 200 30 25 1.75 0.15 ECEC2EP331DJ 200 22 40 1.91 0.15 ECEC2EP391BJ 200 25 35 1.91 0.15 ECEC2EP391CJ 200 30 25 1.91 0.15 ECEC2EP391DJ 200 22 45 2.11 0.15 ECEC2EP471BJ 200 25 40 2.11 0.15 ECEC2EP471CJ 200 30 30 2.11 0.15 ECEC2EP471DJ 200 25 45 2.25 0.15 ECEC2EP561CJ 200 Endurance : 85°C 2000h Terminal Pitch : 10mm When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006 EE180 Aluminum Electrolytic Capacitors/ UP n Standard Products W.V. Cap. (±20%) (V) (mm) 560 30 35 2.25 35 25 2.25 Part No. Min.Packaging Q'ty PET sleeve Terminal Length 4.0mm (Without P.V.C.plate) (pcs) 0.15 ECEC2EP561DJ 100 0.15 ECEC2EP561EJ 200 25 50 2.50 0.15 ECEC2EP681CJ 200 30 40 2.50 0.15 ECEC2EP681DJ 100 35 30 2.50 0.15 ECEC2EP681EJ 200 820 30 45 2.77 0.15 ECEC2EP821DJ 100 35 35 2.77 0.15 ECEC2EP821EJ 100 1000 30 50 3.32 0.15 ECEC2EP102DJ 100 35 40 3.32 0.15 ECEC2EP102EJ 100 1200 35 45 3.53 0.15 ECEC2EP122EJ 100 1500 35 50 4.04 0.15 ECEC2EP152EJ 100 100 22 25 0.92 0.15 ECEC2FP101BJ 200 120 150 180 220 270 315 330 390 470 560 680 350 Dia. Specification Length Ripple current tan δ (120Hz) (120Hz) (+85°C) (+20°C) (mm) (A) (µF) 680 250 Case size 22 30 1.01 0.15 ECEC2FP121BJ 200 25 25 1.01 0.15 ECEC2FP121CJ 200 22 30 1.11 0.15 ECEC2FP151BJ 200 25 25 1.11 0.15 ECEC2FP151CJ 200 22 35 1.21 0.15 ECEC2FP181BJ 200 25 30 1.21 0.15 ECEC2FP181CJ 200 30 25 1.21 0.15 ECEC2FP181DJ 200 22 40 1.41 0.15 ECEC2FP221BJ 200 25 35 1.41 0.15 ECEC2FP221CJ 200 30 25 1.41 0.15 ECEC2FP221DJ 200 22 45 1.60 0.15 ECEC2FP271BJ 200 25 40 1.60 0.15 ECEC2FP271CJ 200 30 30 1.60 0.15 ECEC2FP271DJ 200 25 45 1.82 0.15 ECEC2FP331CJ 200 30 35 1.82 0.15 ECEC2FP331DJ 100 35 25 1.82 0.15 ECEC2FP331EJ 200 25 50 2.01 0.15 ECEC2FP391CJ 200 30 35 2.01 0.15 ECEC2FP391DJ 100 35 30 2.01 0.15 ECEC2FP391EJ 200 30 40 2.27 0.15 ECEC2FP471DJ 100 35 35 2.27 0.15 ECEC2FP471EJ 100 30 45 2.56 0.15 ECEC2FP561DJ 100 35 35 2.56 0.15 ECEC2FP561EJ 100 35 45 2.87 0.15 ECEC2FP681EJ 100 820 35 50 3.25 0.15 ECEC2FP821EJ 100 82 22 25 0.83 0.15 ECEC2VP820BJ 200 100 22 30 0.91 0.15 ECEC2VP101BJ 200 120 22 30 1.00 0.15 ECEC2VP121BJ 200 25 25 1.00 0.15 ECEC2VP121CJ 200 22 35 1.12 0.15 ECEC2VP151BJ 200 150 Endurance : 85°C 2000h Terminal Pitch : 10mm When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006 EE181 Aluminum Electrolytic Capacitors/ UP n Standard Products W.V. Cap. (±20%) (V) Case size Dia. Specification Length Ripple tan δ current (120Hz) (120Hz) (+85°C) (+20°C) (mm) (A) Part No. Min.Packaging Q'ty PET sleeve Terminal Length 4.0mm (pcs) (µF) (mm) 150 25 30 1.12 0.15 ECEC2VP151CJ 200 30 25 1.12 0.15 ECEC2VP151DJ 200 22 40 1.22 0.15 ECEC2VP181BJ 200 25 35 1.22 0.15 ECEC2VP181CJ 200 180 220 (Without P.V.C.plate) 30 25 1.22 0.15 ECEC2VP181DJ 200 22 45 1.44 0.15 ECEC2VP221BJ 200 25 40 1.44 0.15 ECEC2VP221CJ 200 30 30 1.44 0.15 ECEC2VP221DJ 200 35 25 1.44 0.15 ECEC2VP221EJ 200 25 45 1.66 0.15 ECEC2VP271CJ 200 30 35 1.66 0.15 ECEC2VP271DJ 100 35 30 1.66 0.15 ECEC2VP271EJ 200 25 50 1.88 0.15 ECEC2VP331CJ 200 30 40 1.88 0.15 ECEC2VP331DJ 100 35 30 1.88 0.15 ECEC2VP331EJ 200 30 45 2.06 0.15 ECEC2VP391DJ 100 35 35 2.06 0.15 ECEC2VP391EJ 100 30 50 2.40 0.15 ECEC2VP471DJ 100 35 40 2.40 0.15 ECEC2VP471EJ 100 560 35 45 2.60 0.15 ECEC2VP561EJ 100 680 35 50 2.96 0.15 ECEC2VP681EJ 100 68 22 25 0.76 0.15 ECEC2GP680BJ 200 82 22 25 0.83 0.15 ECEC2GP820BJ 200 100 22 30 0.92 0.15 ECEC2GP101BJ 200 25 25 0.92 0.15 ECEC2GP101CJ 200 22 35 1.02 0.15 ECEC2GP121BJ 200 25 30 1.02 0.15 ECEC2GP121CJ 200 22 40 1.16 0.15 ECEC2GP151BJ 200 25 30 1.16 0.15 ECEC2GP151CJ 200 30 25 1.16 0.15 ECEC2GP151DJ 200 22 45 1.44 0.15 ECEC2GP181BJ 200 25 35 1.44 0.15 ECEC2GP181CJ 200 270 350 330 390 470 120 150 180 400 220 270 330 390 30 30 1.44 0.15 ECEC2GP181DJ 200 22 50 1.49 0.15 ECEC2GP221BJ 200 25 40 1.49 0.15 ECEC2GP221CJ 200 30 30 1.49 0.15 ECEC2GP221DJ 200 25 45 1.67 0.15 ECEC2GP271CJ 200 30 35 1.67 0.15 ECEC2GP271DJ 100 35 30 1.67 0.15 ECEC2GP271EJ 200 30 40 1.90 0.15 ECEC2GP331DJ 100 35 35 1.90 0.15 ECEC2GP331EJ 100 30 45 2.13 0.15 ECEC2GP391DJ 100 Endurance : 85°C 2000h Terminal Pitch : 10mm When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006 EE182 Aluminum Electrolytic Capacitors/ UP n Standard Products W.V. Cap. (±20%) Case size Dia. Length (mm) (mm) Specification Part No. Ripple tan δ current (120Hz) (120Hz) (+85°C) (+20°C) PET sleeve Terminal Length 4.0mm Min.Packaging Q'ty (V) (µF) 390 35 40 2.13 0.15 ECEC2GP391EJ 100 400 470 35 45 2.39 0.15 ECEC2GP471EJ 100 560 35 50 2.69 0.15 ECEC2GP561EJ 100 82 22 30 0.83 0.15 ECEC2SP820BJ 200 100 22 30 0.92 0.15 ECEC2SP101BJ 200 25 25 0.92 0.15 ECEC2SP101CJ 200 22 35 1.02 0.15 ECEC2SP121BJ 200 25 30 1.02 0.15 ECEC2SP121CJ 200 22 40 1.16 0.15 ECEC2SP151BJ 200 25 30 1.16 0.15 ECEC2SP151CJ 200 30 25 1.16 0.15 ECEC2SP151DJ 200 22 45 1.44 0.15 ECEC2SP181BJ 200 25 35 1.44 0.15 ECEC2SP181CJ 200 30 30 1.44 0.15 ECEC2SP181DJ 200 25 45 1.49 0.15 ECEC2SP221CJ 200 30 30 1.49 0.15 ECEC2SP221DJ 200 35 25 1.49 0.15 ECEC2SP221EJ 200 25 50 1.67 0.15 ECEC2SP271CJ 200 30 35 1.67 0.15 ECEC2SP271DJ 100 35 30 1.67 0.15 ECEC2SP271EJ 200 30 45 1.90 0.15 ECEC2SP331DJ 100 35 35 1.90 0.15 ECEC2SP331EJ 100 30 50 2.13 0.15 ECEC2SP391DJ 100 35 40 2.13 0.15 ECEC2SP391EJ 100 470 35 45 2.39 0.15 ECEC2SP471EJ 100 560 35 50 2.69 0.15 ECEC2SP561EJ 100 56 22 25 0.70 0.15 ECEC2WP560BJ 200 68 22 30 0.76 0.15 ECEC2WP680BJ 200 120 150 180 420 220 270 330 390 82 100 450 120 150 180 (A) (Without P.V.C. plate) (pcs) 22 30 0.83 0.15 ECEC2WP820BJ 200 25 25 0.83 0.15 ECEC2WP820CJ 200 22 35 0.93 0.15 ECEC2WP101BJ 200 25 30 0.93 0.15 ECEC2WP101CJ 200 30 25 0.93 0.15 ECEC2WP101DJ 200 22 40 1.04 0.15 ECEC2WP121BJ 200 25 30 1.04 0.15 ECEC2WP121CJ 200 30 25 1.04 0.15 ECEC2WP121DJ 200 22 50 1.19 0.15 ECEC2WP151BJ 200 25 40 1.19 0.15 ECEC2WP151CJ 200 30 30 1.19 0.15 ECEC2WP151DJ 200 25 45 1.35 0.15 ECEC2WP181CJ 200 30 35 1.35 0.15 ECEC2WP181DJ 100 35 25 1.35 0.15 ECEC2WP181EJ 200 Endurance : 85°C 2000h Terminal Pitch : 10mm When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006 EE183 Aluminum Electrolytic Capacitors/ UP n Standard Products W.V. Cap. (±20%) (V) Case size Dia. Specification Length Ripple tan δ current (120Hz) (120Hz) (+85°C) (+20°C) (mm) (A) Part No. Min.Packaging Q'ty PET sleeve Terminal Length 4.0mm (µF) (mm) 220 25 50 1.55 0.15 ECEC2WP221CJ 200 30 40 1.55 0.15 ECEC2WP221DJ 100 35 30 1.55 0.15 ECEC2WP221EJ 200 30 45 1.78 0.15 ECEC2WP271DJ 100 35 35 1.78 0.15 ECEC2WP271EJ 100 30 50 2.01 0.15 ECEC2WP331DJ 100 35 40 2.01 0.15 ECEC2WP331EJ 100 390 35 45 2.24 0.15 ECEC2WP391EJ 100 470 35 50 2.53 0.15 ECEC2WP471EJ 100 270 450 330 (Without P.V.C. plate) (pcs) Endurance : 85°C 2000h Terminal Pitch : 10mm When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006 EE184 Aluminum Electrolytic Capacitors/ UP(L:20mm) n Standard Products(L:20mm) W.V. Cap. (±20%) (V) 16 25 35 50 63 80 100 160 200 250 400 Case size Dia. Specification Ripple Length current tan δ (120Hz) (120Hz) (+85°C) (+20°C) (mm) (A) Part No. Min.Packaging Q'ty PET sleeve Terminal Length 4.0mm (µF) (mm) 4700 22 20 1.60 0.50 ECEC1CP472BJ 200 6800 25 20 1.80 0.50 ECEC1CP682CJ 200 10000 30 20 2.40 0.50 ECEC1CP103DJ 200 (Without P.V.C.plate) (pcs) 15000 35 20 3.20 0.50 ECEC1CP153EJ 200 3300 22 20 1.60 0.40 ECEC1EP332BJ 200 4700 25 20 1.80 0.40 ECEC1EP472CJ 200 6800 30 20 2.30 0.40 ECEC1EP682DJ 200 10000 35 20 2.70 0.40 ECEC1EP103EJ 200 2200 22 20 1.40 0.35 ECEC1VP222BJ 200 3300 25 20 1.70 0.35 ECEC1VP332CJ 200 4700 30 20 2.00 0.35 ECEC1VP472DJ 200 6800 35 20 2.40 0.35 ECEC1VP682EJ 200 1500 22 20 1.20 0.30 ECEC1HP152BJ 200 2200 25 20 1.40 0.30 ECEC1HP222CJ 200 3300 30 20 1.70 0.30 ECEC1HP332DJ 200 4700 35 20 2.10 0.30 ECEC1HP472EJ 200 1000 22 20 1.20 0.25 ECEC1JP102BJ 200 1500 25 20 1.30 0.25 ECEC1JP152CJ 200 2200 30 20 1.50 0.25 ECEC1JP222DJ 200 2700 35 20 1.70 0.25 ECEC1JP272EJ 200 680 22 20 1.00 0.20 ECEC1KP681BJ 200 1000 25 20 1.20 0.20 ECEC1KP102CJ 200 1500 30 20 1.40 0.20 ECEC1KP152DJ 200 2200 35 20 1.70 0.20 ECEC1KP222EJ 200 470 22 20 1.00 0.20 ECEC2AP471BJ 200 680 25 20 1.10 0.20 ECEC2AP681CJ 200 1000 30 20 1.20 0.20 ECEC2AP102DJ 200 1500 35 20 1.50 0.20 ECEC2AP152EJ 200 220 22 20 0.75 0.15 ECEC2CP221BJ 200 270 25 20 0.87 0.15 ECEC2CP271CJ 200 390 30 20 1.10 0.15 ECEC2CP391DJ 200 560 35 20 1.30 0.15 ECEC2CP561EJ 200 150 22 20 0.65 0.15 ECEC2DP151BJ 200 220 25 20 0.87 0.15 ECEC2DP221CJ 200 330 30 20 1.10 0.15 ECEC2DP331DJ 200 470 35 20 1.30 0.15 ECEC2DP471EJ 200 120 22 20 0.45 0.15 ECEC2EP121BJ 200 150 25 20 0.65 0.15 ECEC2EP151CJ 200 220 30 20 0.87 0.15 ECEC2EP221DJ 200 330 35 20 1.10 0.15 ECEC2EP331EJ 200 47 22 20 0.25 0.15 ECEC2GP470BJ 200 68 25 20 0.35 0.15 ECEC2GP680CJ 200 Endurance : 85°C 2000h Terminal Pitch : 10mm Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006 EE185 Aluminum Electrolytic Capacitors/ UP(L:20mm) n Standard Products(L:20mm) W.V. Cap. (±20%) (V) 400 450 Case size Dia. (µF) (mm) 100 30 Specification Ripple Length current tan δ (120Hz) (120Hz) (+20°C) ( m m ) (+85°C) (A) 20 0.47 0.15 Part No. Min.PackagingQ'ty PET sleeve Terminal Length 4.0mm (Without P.V.C.plate) (pcs) ECEC2GP101DJ 200 150 35 20 0.60 0.15 ECEC2GP151EJ 200 33 22 20 0.20 0.15 ECEC2WP330BJ 200 47 25 20 0.29 0.15 ECEC2WP470CJ 200 68 30 20 0.38 0.15 ECEC2WP680DJ 200 100 35 20 0.52 0.15 ECEC2WP101EJ 200 Endurance : 85°C 2000h Terminal Pitch : 10mm Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006 EE186