10/100Base-TX Voice Over IP Magnetic Module ELECTRONICS INC. EPF8215S & EPF8215S-RC • Designed for IP Phone or Switch Applications • Complies with IEEE 802.3, 10/100Base-TX Standards • Add “-RC” after part number for RoHS Compliant • Surface Mount Package • 1500 Vrms Isolation Electrical Parameters @ 25° C Insertion Loss (dB Max.) Return Loss (dB Min.) Common Mode Rejection (dB Min.) Crosstalk (dB Min.) @ 100 MHz 1-100 MHz 1-100 MHz Xmit/Rcv Xmit/Rcv Xmit/Rcv -12/-12 -10/-10 -30/-30 OCL (µH) @ 70°C 100 KHz, 0.1 Vrms 8 mA DC Bias 1-80 MHz @ 100 MHz @ 150 MHz 1-30 MHz @ 60 MHz Cable Side Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv 350 -1/-1 -1/-1 -3/-3 -18/-18 Impedance : 100 Ω • Rise Time : 3.0 nS Max. • • Package Schematic .490 (12.44) .085 (2.16) .050 (1.27) .070 (1.78) PCA EPF8215S(-RC) Date Code .270 (6.86) .440 (11.18) 1 16 Transmit 2 15 Chip Side Suggested Solder Pad Layout Pin 1 I.D. Receive .010/.015 (.254/.381) 3 1CT:1CT 14 6 11 7 10 8 .030 (.762) .350 (8.89) .240 (6.10) -35 1CT:1CT Cable Side 9 .008/.012 (.203/.305) 0°-8° .035 (.889) .018/.022 (.457/.559) .050 (1.27) .380 (9.65) Notes : 1. Lead Finish EPF8215S EPF8215S-RC SnPb Hot Tin Dip (Sn) † 2. Peak Temperature Rating 225°C 3. Moisture Sensitive Levels MSL = 3 (168 Hours, ≤30°C/60%RH) 4. Weight 5. Packaging Information (Tube) (Tape & Reel) 245°C MSL = 4 (72 Hours, ≤30°C/60%RH) 0.970 grams 0.970 grams 39 pieces/tube 39 pieces/tube 650 pieces/13” reel 650 pieces/13” reel † Lead Material : Ni Barrier over Cu Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSF8215S Rev. 3 2/18/09 JDG TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com