FUJITSU FTR

SILENT TWIN RELAY FOR AUTOMOTIVE APPLICATIONS
1POLE X 2, H-BRIDGE, 25A
FTR-P2 SERIES
RoHS compliant
n FEATURES
l Low operating sound
An original silent mechanism decreases the propagation of operating
sound when mounted on a PCB. (Average sound pressure: 50dB at 5
cm).
l Compact, high density package
350 mm2 mounting area. (11% less than the FBR 510 series nonquiet twin relay).
l High sensitivity, low power consumption
(nominal power consumption: 450 mW).
l High capacity
Heat dissipation is high due to a single cover structure.
l Ease of PCB layout
The FTR-P2 incorporates internal H-Bridge connections typically used
in reversing applications. All terminals are on the perimeter.
l High breaking capability.
In addition to the standard gap product (0.3 mm), a higher gap product (0.6 mm), suitable for over voltage breaking can be supplied.
l Typical applications
Power window, Doorlock, Power seat, Wiper (for H-Bridge circuit)
l
RoHS
compliant since date code: 0623
Please see page 7 for more information
n ORDERING INFORMATION
[Example]
FTR-P2 C N 012 W1
(a)
(b) (c) (d) (e)
**
(f )
(a)
Series Name FTR-P2 : FTR-P2 Series
(b)
Contact Arrangement C
: 1 FormC x 2
(c)
Contact Gap
N
: 0.3 mm gap
(d)
Nominal Voltage 009: 9 VDC
(e)
Contact Material
W1
(f)
Special product specification
Symbol to specify special specification product
010: 10 VDC
012: 12 VDC
: Silver-Tin-Oxide-Indium Oxide
Note: The part number is stamped on the relay cover as in the following example:
(Example)
Ordering part number: FTR-P2CN012W1
Stamped part number: P2CN012W1
1
FTR-P2 SERIES
n SPECIFICATIONS
Item
Contact
Coil
Time
Life
Other
Specifications
Arrangement
1 Form C x 2 H-Bridge
Material
Silver-tin oxide-indium
Voltage drop
100mV (1A, 12VDC)
Contact rating
14VDC, 25A (motor locked)
Maximum carrying current
25A / 1 hour (25°C, nominal voltage applied to coil)
Maximum switching current
35A, 16 VDC
Minimum load (reference)*
6V, 1A
Operating temperature range
-40°C to +85°C (no frost)
Storage temperature range
-40°C to +100°C (no frost)
Operate (at nominal voltage)
10 ms maximum
Release (at nominal voltage)
5 ms maximum (without diode)
Mechanical
10 million operations minimum
Electrical
100k operations minimum (at contact rating)
Vibration resistance (operational) 10-55HZ, 1.5mm double amplitude
Shock
resistance
operational
100 m/s2 minimum (10G)
no damage
100 m/s2 minimum (100G)
Weight
Approximately 13 grams
Average sound pressure
Approximately 50dB at 5cm
*This is the standard value of the minimum load level. This value may differ depending on the switching frequency, environmental
conditions and target reliability standard. We recommend to check this value by an actual load prior to use.
n COIL DATA
N o m i n a l C o il
Voltage
C o il R e s is ta n c e *
(±1 0% )
Power
C o n su m p t ion
at nominal coil
v olta ge *
M u st O p e rate
Voltage*
M u s t R e l ea se
Voltage
F T R -P 2 C N 0 0 9 W 1
DC 9V
180Ω
4 50 m W
5.5 V (2 0 ˚ )
6 .9 V ( 85 ˚ )
0.7 2
F T R -P 2 C N 0 1 0 W 1
DC 10V
220Ω
4 55 m W
6.3 V ( 2 0 ˚ )
7 .9 V ( 85 ˚ )
0 .8
F T R -P 2 C N 0 1 2 W 1
DC 12V
320Ω
4 50 m W
7.3 V ( 2 0 ˚ )
9.2 V ( 8 5 ˚ )
0 .9 6
P rodu ct N am e
FTR-P2 SERIES
CHARACTERISTIC DATA
n
1. MAXIMUM BREAK CAPACITY
100
Motorlocked
FTR-P2
Switchingcurrent(A)
50
Testcircuit
RL-1
20
N.O.
N.C.
10
M
N.O.
5
N.C.
RL-2
2
1
10
12
14
16
20
25
30
Voltagebetweencontacts(VDC)
2. LIFE
14VDCmotorlockedload
Numberofoperations(x104)
30
20
10
5
10
15
20
25 30 35 40
50
Lockedmotorcurrent(A)
FTR-P2 SERIES
CHARACTERISTIC DATA
n
3. LIFE TEST (EXAMPLES)
• Test item
14 V DC-25 A
Motor Lock
100K operations
minimum
• Test circuit
M
Percent of nominal coil voltage (%)
• Shift of pick-up drop-out voltage
80
60
PICK-UP
40
20
DROP-OUT
0
20
Initial
• Current wave form
20 sec
(RL-1)
25 A
100
100
1000
500
Number of operations (x 10 times)
3
• Change in contact resistance
0A
(RL-2)
25 A
(Measured at DC 6V 1A wet)
0.25 sec
10 sec
0.25 sec
Contact Resistance (mΩ)
1000
0A
100
10
1
20
• Test circuit
M
Notes: 1. Test was done on
one side of twin relay
2. NC contacts provide dynamic brake circuits
Percent of nominal coil voltage
(%)
Initial
• Test item
14 V DC,
• Change in pick-up drop-out voltage
inrush current: 17A
motor free
300K operations minimum
100
0.25 seconds ON,
9.75 seconds OFF
1.5 A
12 A
100
500
1000
500
1000
Number of operations (x 10 times)
3
60
40
20
0
PICK-UP
DROP-OUT
20
• Change in contact resistance
Contact Resistance (mΩ)
17 A
50
80
Initial
• Current wave form
0A
50
50
100
Number of operations (x 10 times)
3
(Measured at DC 6V 1A wet)
1000
100
10
1
Initial
20
50
100
Number of operations (x 103 times)
1000
500
FTR-P2 SERIES
5. MAXIMUM BREAK CAPACITY
4. COIL TEMPERATURE RISE
50
80
(3) Contact carrying current: 20A
60
40
(2) Contact carrying current: 10A
20
0
0
Motor lock load
FTR-P2CN
20
10
5
2
20
10
Switching Current (A)
Coil temperature rise (degree C)
100
Ambient temperature:20C,
one coil energized, 0.45 W coil power
100
30
1
10
Applied time (minutes)
13 15 17 20
25
30
Voltage between contacts (VDC)
6. OPERATING COIL VOLTAGE RANGE
Ratio to nominal coil voltage (%)
Intermittent coil operation with 10A
carrying current
140
120
Continuous coil
power range
100
80
60
-ope
Must
rate
volta
ge
40
-30 -20
0
20
40
60
80
100
Ambient temperature (C)
FTR-P2 SERIES
5. VIBRATION RESISTANCE CHARACTERISTICS
Dual amplitude (mm)
5
Acceleration (m/s2)
100
50
44 m/s
2
1
0.5
0.1
0.01
Frequency : 10~2000 Hz
Acceleration : 100 m/s2 maximum
Vibration direction : see drawing below
Detection level : generation of 1 ms
or longer chattering
Range where chattering occurs
Break contact
Coil deenergization
on Y-direction
Z
FTR-P2
Automotive
electronic standard
10
10
50
100
500
1000
2000
X
Y
Frequency (Hz)
6. SHOCK RESISTANCE CHARACTERISTIC
1,000
Impact apply time : 111 ms, half-sine wave
Test condition: coil, energized and de-energized
Impact direction: see drawing below
Detection level : generation of 1ms or longer
contact chattering
800
impact value (m/s2)
600
400
Y2
200
0
Y1
Z2
X1
X2
Y1
Y2
Impact direction
Z1
Z2
: Break contact
(coil de-energized)
: Make contact
(coil energized)
FTR-P2
Z1
X1
X2
FTR-P2 SERIES
nREFERENCE DATA
Operating/release voltage distribution
80
Data: FTR-P2
Units: n = 100
Operate
Release
20
60
40
20
0
10
20 30 40
50 60 70
0
80
0
2
3
4
5
6
7
0
8
10
60
40
60
40
30
10
0
10 20 30 40 50 60 70 80
Contact resistance (mΩ
)
45 46 47 48 49 50 51 52 53 54 55
Sound pressure level (dB)
Method of acoustic noise measure
Measuring condition: Distance from 5 cm,
relay operation at 10Hz
Tester: Noise tester Ryon NA-61, A range
5cm
Microphone
 Schematic
 Dimensions
(bottom view)
 PC board mounting hole layout
(bottom view)
5
5
5
(2.8)
6
6
18 +0.5
16.5 +0.5
3.5
0.4
3.5
Relay
Cushion
nDIMENSIONS
21 +0.5
80
FTR-P2CN012W1
n=100
50
0
0 10 20 30 40 50 60 70 80
Ratio to rated voltage (%)
50 60 70
20
20
0
20 30 40
Distribution of sound pressure (with diode)
Distribution (%)
Distribution (%)
20
0
0
Contact resistance (mΩ)
Data: FTR-P2
Units: n = 100
80
40
1
Contact resistance distribution
100
Release voltage
Operate voltage
60
40
Time (ms)
Operating/release voltage distribution
Data: FTR-P2
Units: n = 100
60
20
Ratio to rated voltage (%)
80
Data: FTR-P2
Units: n = 100
80
Distribution (%)
Distribution (%)
Distribution (%)
40
Distribution (%)
Release
with diode
80
Contact resistance distribution
100
Operate
Data: FTR-P2
Units: n = 100
60
0
Operate and release time distribution
100
7-ø1.5
Dimensional tolerance: 0.1
Units: mm
FTR-P2 SERIES
RoHS Compliance and Lead Free Relay Information
1. General Information
Relays produced after the specific date code that is indicated on each data sheet are lead-free
now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info.
(http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf)
l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu.
l All signal and most power relays also comply with RoHS. Please refer to individual data
sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that
are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE).
l It has been verified that using lead-free relays in leaded assembly process will not cause any
problems (compatible).
l “LF” is marked on each outer and inner carton. (No marking on individual relays).
l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists.
Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC)
l
2. Recommended Lead Free Solder Profile
l
Recommended solder paste Sn-3.0Ag-0.5Cu.
Reflow Solder condition
Flow Solder condition:
Pre-heating:
Soldering:
maximum 120˚C
dip within 5 sec. at 260˚C soler bath
Solder by Soldering Iron:
Soldering Iron
Temperature: maximum 360˚C
Duration:
maximum 3 sec.
We highly recommend that you confirm your actual solder conditions
3. Moisture Sensitivity
l
Moisture Sensitivity Level standard is not applicable to electromechanical realys.
4. Tin Whisker
l
Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in
house test.
FTR-P2 SERIES
Fujitsu Components International Headquarter Offices
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141 8630, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Web: www.fcl.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Web: emea.fujitsu.com/components/
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: [email protected]
Web: http://www.fujitsu.com/us/services/edevices/components/
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: [email protected]
Web: http://www.fujitsu.com/sg/services/micro/components/
©2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.
Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our
products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice.
Rev. January 3, 2008.