Product specification 1A7 SOD-123 Unit: mm ■ Features ● Low Leakage Current ● Glass Passivated Junction ● Epoxy meets UL 94 V-0 flammability rating ● Moisture Sensitivity Level 1 ■ Absolute Maximum Ratings Ta = 25℃ Parameter Rating Unit 1000 V VR(RMS) 700 V IO 1.0 A IF SM 25 A Symbol Peak Repetitive Reverse Voltage V RRM Working Peak Reverse Voltage VRMW M DC Blocking Voltage VR RMS Reverse Voltage Average Rectified Output Current (Note 1) @ TA = 75℃ Non-Repetitive Peak Forward Surge Current, 8.3ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) @TA = 25℃ DC Blocking Voltage @TA = 100℃ Forward Voltage @ IF = 1.0A Typical Junction Capacitance (Note 2) Typical Thermal Resistance Junction to Ambient Operating and Storage Temperature Range IRM 5 50 μA VF M 1.1 V CJ 15 pF R θJA 75 ℃ /W Tj,TSTG -65 to +175 ℃ Notes: 1. Leads maintained at ambient temperature at a distance of 9.5mm from the case. 2. Measured at 1. MHz and applied reverse voltage of 4.0V DC. Marking Marking 1A1KV http://www.twtysemi.com [email protected] 4008-318-123 1 of 2 Product specification 1A7 Figure 1 Typical Forward Characteristics Figure 2 Forward Derating Curve 20 1.2 10 1.0 6 4 .8 2 .6 Amps Amps 1 .4 .6 .4 .2 Single Phase, Half Wave 60Hz Resistive or Inductive Load .2 25°C 0 .1 50 0 75 100 125 150 175 .06 °C .04 Average Forward Rectified Current - Amperesversus Ambient Temperature - °C .02 .01 .4 .6 .8 1.0 1.4 1.2 Volts Instantaneous Forward Current - Amperesversus Instantaneous Forward Voltage - Volts Figure 3 Junction Capacitance 100 60 40 20 pF TJ=25°C 10 6 4 2 1 .1 .2 .4 1 Volts 2 4 10 20 40 100 200 400 1000 Junction Capacitance - pFversus Reverse Voltage - Volts http://www.twtysemi.com [email protected] 4008-318-123 2 of 2