GS9074A HD-LINX® II Adaptive Cable Equalizer GS9074A Data Sheet Features Description • SMPTE 259M compliant • Automatic cable equalization • Multi-standard operation from 143Mb/s to 360Mb/s The GS9074A is a second-generation high-speed BiCMOS integrated circuit designed to equalize and restore signals received over 75Ω co-axial cable. • Supports DVB-ASI at 270Mb/s • Small footprint (4mm x 4mm) • Pb-free and RoHS compliant • Manual bypass (useful for low data rates with slow rise/fall times) The GS9074A is designed to support SMPTE 259M, and is optimized for performance at 270Mb/s. • Performance optimized for 270Mb/s • Typical maximum equalized length of Belden 1694A cable: 350m at 270Mb/s • 50Ω differential output (with internal 50Ω pull-ups) • Manual output mute or programmable mute based on max cable length adjust • Single 3.3V power supply operation • Operating temperature range: 0°C to +70°C Applications • SMPTE 259M Coaxial Cable Serial Digital Interfaces. The GS9074A features DC restoration to compensate for the DC content of SMPTE pathological test patterns. A voltage programmable mute threshold (MCLADJ) is included to allow muting of the GS9074A output when an approximate selected cable length is reached for SMPTE 259M signals. This feature allows the GS9074A to distinguish between low amplitude SD-SDI signals and noise at the input of the device. The serial digital outputs of the GS9074A may be forced to a mute state by applying a voltage to the MUTE pin. Power consumption is typically 215mW using a 3.3V power supply. The GS9074A is lead-free, and the encapsulation compound does not contain halogenated flame retardant (RoHS compliant). CABLE LENGTH ADJUSTOR CARRIER DETECT MUTE MCLADJ CD MUTE BYPASS SDI SDI EQUALIZER DC RESTORE OUTPUT SDO SDO AGC Functional Block Diagram 34166 - 3 March 2006 1 of 16 www.gennum.com GS9074A Data Sheet Contents Features ........................................................................................................................1 Applications...................................................................................................................1 Description ....................................................................................................................1 1. Pin Out ......................................................................................................................3 1.1 GS9074A Pin Assignment ..............................................................................3 1.2 GS9074A Pin Descriptions .............................................................................3 2. Electrical Characteristics ...........................................................................................5 2.1 Absolute Maximum Ratings ............................................................................5 2.2 DC Electrical Characteristics ..........................................................................5 2.3 AC Electrical Characteristics ...........................................................................6 2.4 Solder Reflow Profiles .....................................................................................7 3. Input / Output Circuits ...............................................................................................9 4. Detailed Description ................................................................................................11 4.1 Serial Digital Inputs .......................................................................................11 4.2 Cable Equalization ........................................................................................11 4.3 Programmable Mute Output ..........................................................................12 4.4 Mute and Carrier Detect ................................................................................12 5. Application Information............................................................................................13 5.1 Typical Application Circuit .............................................................................13 6. Package & Ordering Information .............................................................................14 6.1 Package Dimensions ....................................................................................14 6.2 Recommended PCB Footprint ......................................................................15 6.3 Packaging Data .............................................................................................15 6.4 Ordering Information .....................................................................................15 7. Revision History ......................................................................................................16 34166 - 3 March 2006 2 of 16 GS9074A Data Sheet 1. Pin Out VEE_A 1 SDI 2 VCC_A CD MUTE VCC_D 1.1 GS9074A Pin Assignment 16 15 14 13 12 VEE_D 11 SDO 3 10 SDO 4 9 VEE_D GS9074A (top view) 7 6 AGC AGC 5 8 MCLADJ VEE_A BYPASS SDI Center Pad (bottom of package, internally bonded to VEE_A) Figure 1-1: 16-Pin QFN 1.2 GS9074A Pin Descriptions Table 1-1: GS9074A Pin Descriptions Pin Number Name Timing Type Description 1, 4 VEE_A Analog Power Most negative power supply for analog circuitry. Connect to GND. 2, 3 SDI, SDI Analog Input 5, 6 AGC, AGC Analog – Serial digital differential input. External AGC capacitors. (See Section 5.1 Typical Application Circuit.) 7 BYPASS Not Synchronous Input 8 MCLADJ Analog Input Forces the Equalizing and DC RESTORE stages into bypass mode when HIGH. No equalization occurs in this mode. Maximum cable length adjust. Adjusts the approximate maximum amount of cable to be equalized (from 0m to the maximum cable length). The output is muted (latched to the last state) when the maximum cable length is achieved. NOTE: MCLADJ is only recommended for data rates up to 270Mb/s. 9 VEE_D Analog Power Most negative power supply for the digital circuitry and output buffer. Connect to GND. 10, 11 SDO, SDO Analog 34166 - 3 Output Equalized serial digital differential output. March 2006 3 of 16 GS9074A Data Sheet Table 1-1: GS9074A Pin Descriptions (Continued) Pin Number Name Timing Type Description 12 VEE_D Analog Power Most negative power supply for the digital circuitry and output buffer. Connect to GND. 13 VCC_D Analog Power Most positive power supply for the digital I/O pins of the device. Connect to +3.3V DC. 14 MUTE Not Synchronous Input CONTROL SIGNAL INPUT levels are LVCMOS/LVTTL compatible. (3.3V Tolerant) (Internal pull down resistor) When the MUTE pin is set HIGH by the application interface, the serial digital output of the device will be forced to a steady state. When the MUTE pin is set LOW, the serial digital output of the device will be active. NOTE: This pin may be connected directly to the CD pin to allow mute on loss of carrier. 15 CD Not Synchronous Output STATUS SIGNAL OUTPUT Signal levels are LVCMOS/LVTTL compatible. Indicates the presence of a good input signal. When the CD pin is LOW, a good input signal has been detected. When this pin is HIGH, the input signal is invalid. This pin will indicate loss of carrier for data rates > 19Mb/s. 16 VCC_A Analog Power Most positive power supply for the analog circuitry of the device. Connect to +3.3V DC. – Center Pad – 34166 - 3 Power Internally bonded to VEE_A. March 2006 4 of 16 GS9074A Data Sheet 2. Electrical Characteristics 2.1 Absolute Maximum Ratings Parameter Value Supply Voltage -0.5V to +3.6 VDC Input ESD Voltage 2kV Storage Temperature Range -50°C < Ts < 125°C Input Voltage Range (any input) -0.3 to (VCC +0.3)V Operating Temperature Range 0°C to 70°C Reflow Temperature 260°C 2.2 DC Electrical Characteristics Table 2-1: DC Electrical Characteristics VDD = 3.3V, TA = 0°C to 70°C, unless otherwise shown Parameter Symbol Conditions Min Typ Max Units Notes Supply Voltage VCC – 3.135 3.3 3.465 V ±5% Power Consumption PD TA = 25°C – 215 – mW – Supply Current Is TA = 25°C – 65 – mA – Output Common Mode Voltage VCMOUT TA = 25°C – VCC - ΔVSDO/2 – V – Input Common Mode Voltage VCMIN TA = 25°C – 1.75 – V – MCLADJ DC Voltage (to mute signal) – 0m, TA = 25°C – 1.3 – V – MCLADJ Range – TA = 25°C – 0.4 – V – CD Output Voltage VCD(OH) Carrier not present 2.4 – – V – VCD(OL) Carrier present – – 0.4 V – Mute Input Voltage Required to Force Outputs to Mute VMute Min to Mute 2.0 – – V – Mute Input Voltage Required to Force Outputs Active VMute Max to Activate – – 0.8 V – 34166 - 3 March 2006 5 of 16 GS9074A Data Sheet 2.3 AC Electrical Characteristics Table 2-2: AC Electrical Characteristics VDD = 3.3V, TA = 0°C to 70°C, unless otherwise shown Parameter Symbol Conditions Min Typ Max Units Notes Serial input data rate DRSDO – 143 – 360 Mb/s – Input Voltage Swing ΔVSDI TA =25°C, differential 720 800 950 mVp-p 1 Output Voltage Swing ΔVSDO 100Ω load, TA =25°C, differential – 750 – mVp-p – Maximum Equalized Cable Length – 270Mb/s, Belden 1694A, 350m – 0.2 – UI 2 – 270Mb/s, Belden 8281, 280m – 0.2 – UI 2 – 360Mb/s, Belden 1694A, 190m – 0.25 – UI 2 – 360Mb/s, Belden 8281, 140m – 0.25 – UI 2 Output Rise/Fall time – 20% - 80% – 80 220 ps – Mismatch in rise/fall time – – – – 30 ps – Duty cycle distortion – – – – 100 ps – Overshoot – – – – 10 % – Input Return Loss – – 15 – – dB – Input Resistance – single ended – 1.64 – kΩ – Input Capacitance – single ended – 1 – pF – Output Resistance – single ended – 50 – Ω – NOTES: 1. 0m cable length. 2. Equalizer Pathological. 34166 - 3 March 2006 6 of 16 GS9074A Data Sheet 2.4 Solder Reflow Profiles The device is manufactured with Matte-Sn terminations and is compatible with both standard eutectic and Pb-free solder reflow profiles. MSL qualification was performed using the maximum Pb-free reflow profile shown in Figure 2-1. The recommended standard eutectic reflow profile is shown in Figure 2-2. Temperature 60-150 sec. 20-40 sec. 260˚C 250˚C 3˚C/sec max 217˚C 6˚C/sec max 200˚C 150˚C 25˚C Time 60-180 sec. max 8 min. max Figure 2-1: Maximum Pb-free Solder Reflow Profile (Preferred) 60-150 sec. Temperature 10-20 sec. 230˚C 220˚C 3˚C/sec max 183˚C 6˚C/sec max 150˚C 100˚C 25˚C Time 120 sec. max 6 min. max Figure 2-2: Standard Eutectic Solder Reflow Profile (Pb-free package) 34166 - 3 March 2006 7 of 16 GS9074A Data Sheet GigaBERT 1400 EXT. CLOCK DATA CLOCK OUT OUT 8281 or 1694A CABLE 50/75 IN GS1574A/9074A TEST BOARD EXT. CLOCK 1.485GHz/270MHz OUT CH. 1 OUT CH. 2 TDS 820 EXT. TRIGGER Figure 2-3: Test Circuit 34166 - 3 March 2006 8 of 16 GS9074A Data Sheet 3. Input / Output Circuits 3k 3k SDI SDI RC 3.6k 3.6k Figure 3-1: Input Equivalent Circuit VCC 12.2k + MCLADJ - 150µ Figure 3-2: MCLADJ Equivalent Circuit 50 SDO 50 SDO Figure 3-3: Output Circuit 34166 - 3 March 2006 9 of 16 GS9074A Data Sheet MUTE, BYPASS Figure 3-4: MUTE and BYPASS Circuits CD Figure 3-5: CD Circuit 34166 - 3 March 2006 10 of 16 GS9074A Data Sheet 4. Detailed Description The GS9074A is a high speed BiCMOS IC designed to equalize serial digital signals. The GS9074A can equalize SD serial digital signals, and will typically equalize greater than 350m at 270Mb/s. The GS9074A is powered from a single +3.3V power supply and consumes approximately 215mW of power. 4.1 Serial Digital Inputs The serial data signal may be connected to the input pins (SDI/SDI) in either a differential or single ended configuration. AC coupling of the inputs is recommended, as the SDI and SDI inputs are internally biased at approximately 1.8V. 4.2 Cable Equalization The input signal passes through a variable gain equalizing stage whose frequency response closely matches the inverse of the cable loss characteristic. In addition, the variation of the frequency response with control voltage imitates the variation of the inverse cable loss characteristic with cable length. The edge energy of the equalized signal is monitored by a detector circuit which produces an error signal corresponding to the difference between the desired edge energy and the actual edge energy. This error signal is integrated by both an internal and an external AGC filter capacitor providing a steady control voltage for the gain stage. As the frequency response of the gain stage is automatically varied by the application of negative feedback, the edge energy of the equalized signal is kept at a constant level which is representative of the original edge energy at the transmitter. The equalized signal is also DC restored, effectively restoring the logic threshold of the equalized signal to its correct level independent of shifts due to AC coupling. The digital output signals have a nominal voltage of 750mVpp differential, or 375mVpp single ended when terminated with 50Ω as shown in Figure 4-1. 34166 - 3 March 2006 11 of 16 GS9074A Data Sheet +187.5mV VCM = 2.925V typical SDO -187.5mV SDO +187.5mV 50 50 VCM = 2.925V typical -187.5mV Figure 4-1: Typical Output Voltage Levels 4.3 Programmable Mute Output The GS9074A incorporates a programmable threshold output mute (MCLADJ). In applications where there are multiple input channels using the GS9074A, it is advantageous to have a programmable mute output to avoid signal crosstalk. The output of the GS9074A can be muted when the input signal decreases below a certain input level. This threshold is determined using the input voltage applied to the MCLADJ pin. The MCLADJ pin may be left unconnected for applications where output muting is not required. This feature has been designed for use in applications such as routers where signal crosstalk and circuit noise cause the equalizer to output erroneous data when no input signal is present. The use of a Carrier Detect function with a fixed internal reference does not solve this problem since the signal to noise ratio on the circuit board could be significantly less than the default signal detection level set by the on chip reference. NOTE: MCLADJ is only recommended for data rates up to 360Mb/s. 4.4 Mute and Carrier Detect The GS9074A includes a MUTE input pin that allows the application interface to mute the serial digital output at any time. Set the MUTE pin HIGH to mute SDO and SDO. In this case, the outputs will mute regardless of the setting of the BYPASS pin. A Carrier Detect output pin (CD) indicates the presence of a valid signal at the input of the GS9074A. When CD is LOW, the device has detected a valid input on SDI and SDI. When CD is HIGH, the device has not detected a valid input. NOTE: CD will only detect loss of carrier for data rates greater than 19Mb/s. The CD output pin may be connected directly to the MUTE input pin to enable automatic muting of the GS9074A when no valid input signal has been detected. NOTE: If the maximum cable length is exceeded and the device is not in bypass mode the GS1574A will not assert the CD pin even if a carrier is present. 34166 - 3 March 2006 12 of 16 GS9074A Data Sheet 5. Application Information 5.1 Typical Application Circuit CD MUTE VCC VCC 13 VCC_D 1 MUTE 6.2n 1u 10n VEE_D VEE_A 2 SDO SDI 75 12 + 4u7 SDO 11 GS9074A 3 VEE_A 5 6 7 MCLADJ 37R4 BYPASS 4 75 SDO SDI AGC 1u AGC SDI 14 15 CD VCC_A 16 10n VEE_D 10 + SDO 9 4u7 8 MCLADJ 470n 470n BYPASS NOTE: All resistors in Ohms, capacitors in Farads, and inductors in Henrys, unless otherwise noted. Figure 5-1: GS9074A Typical Application Circuit 34166 - 3 March 2006 13 of 16 GS9074A Data Sheet 6. Package & Ordering Information 6.1 Package Dimensions A 2.76+/-0.10 0.40+/-0.05 4.00+/-0.05 DATUM A PIN 1 AREA 2X 2.76+/-0.10 4.00+/-0.05 B CENTER TAB DETAIL B 0.15 C DATUM B 0.15 C 2X 0.35+/-0.05 0.65 0.20 REF 16X 0.10 C C 0.10 CAB 0.05 C DATUM A OR B 16X 0.08 C SEATING PLANE 0.65/2 0.00-0.05 0.85+/-0.05 TERMINAL TIP 0.65 DETAIL B SCALE:NTS 34166 - 3 March 2006 14 of 16 GS9074A Data Sheet 6.2 Recommended PCB Footprint 0.35 0.65 0.55 3.70 2.76 CENTER PAD NOTE: All dimensions are in millimeters. 2.76 3.70 The Center Pad should be connected to the most negative power supply plane for analog circuitry in the device (VEE_A) by a minimum of 5 vias. Note: Suggested dimensions only. Final dimensions should conform to customer design rules and process optimizations. 6.3 Packaging Data Parameter Value Package Type 4mm x 4mm 16-pin QFN Package Drawing Reference JEDEC M0220 Moisture Sensitivity Level 3 Junction to Case Thermal Resistance, θj-c 31.0°C/W Junction to Air Thermal Resistance, θj-a (at zero airflow) 43.8°C/W Psi 11.0°C/W Pb-free and RoHS compliant Yes 6.4 Ordering Information GS9074A 34166 - 3 Part Number Package Temperature Range GS9074ACNE3 16-pin QFN 0°C to 70°C March 2006 15 of 16 GS9074A Data Sheet 7. Revision History Version ECR PCN Date Changes and/or Modifications A 135927 – February 2005 New document. 0 136165 – March 2005 Converted to Preliminary Data Sheet. Updated typical application circuit. Updated Input/Output circuits. Updated AC and DC electrical characteristics. Updated description of MUTE and CD functionality. Correced minor typing errors. Updated center pad dimensions on PCB footprint. 1 137888 – September 2005 Corrected process to BiCMOS. 2 138357 37278 November 2005 Converted to Data Sheet. 3 139635 38695 March 2006 Corrected pad standoff height and tolerances for pad width & package dimension. Corrected pad shape. CAUTION ELECTROSTATIC SENSITIVE DEVICES DO NOT OPEN PACKAGES OR HANDLE EXCEPT AT A STATIC-FREE WORKSTATION DOCUMENT IDENTIFICATION DATA SHEET The product is in production. Gennum reserves the right to make changes to the product at any time without notice to improve reliability, function or design, in order to provide the best product possible. GENNUM CORPORATION Mailing Address: P.O. Box 489, Stn. A, Burlington, Ontario, Canada L7R 3Y3 Shipping Address: 970 Fraser Drive, Burlington, Ontario, Canada L7L 5P5 Tel. +1 (905) 632-2996 Fax. +1 (905) 632-5946 GENNUM JAPAN CORPORATION Shinjuku Green Tower Building 27F, 6-14-1, Nishi Shinjuku, Shinjuku-ku, Tokyo, 160-0023 Japan Tel. +81 (03) 3349-5501, Fax. +81 (03) 3349-5505 GENNUM UK LIMITED 25 Long Garden Walk, Farnham, Surrey, England GU9 7HX Tel. +44 (0)1252 747 000 Fax +44 (0)1252 726 523 Gennum Corporation assumes no liability for any errors or omissions in this document, or for the use of the circuits or devices described herein. The sale of the circuit or device described herein does not imply any patent license, and Gennum makes no representation that the circuit or device is free from patent infringement. GENNUM and the G logo are registered trademarks of Gennum Corporation. © Copyright 2005 Gennum Corporation. All rights reserved. Printed in Canada. www.gennum.com 34166 - 3 March 2006 16 of 16 16