HCC4529B HCF4529B DUAL 4-CHANNEL OR SINGLE 8-CHANNEL ANALOG DATA SELECTOR .. .. . DATA PATHS ARE BIDIRECTIONAL 10 MHz OPERATION (typical) 3-STATE OUTPUTS ”ON” RESISTANCE 125 W TYPICAL @ 15V SUPPLY VOLTAGE RANGE = 3Vdc TO 18Vdc EY (Plastic Package) F (Ceramic Package) M1 (Micro Package) C1 (Chip Carrier) ORDER CODES : HCC4529BF HCF4529BM1 HCF4529BEY HCF4529BC1 PIN CONNECTIONS DESCRIPTION The HCC4529B (extended temperataure range) and HCF4529b (intermediate temperature range) are monolithic integrated circuits available in 16lead dual in line plastic or ceramic package and plastic micropackage. The HCC/HCF4529b is a DUAL 4-CHANNEL or 8CHANNEL device. One of the two possible functions can be selected by a proper input coding. For the single 8-bit mode Z and W output must be tied together. HCC/HCF4529B is suitable for digital as well as analogue applications, including 1 of 4 and 1 of 8 data selector functions. Dual binary to 1 of 4 or single binary to 1 of 8 decoder applications can be implemented because the device allow analogue and bidirectional operation. September 1988 1/10 HCC/HCF4529B ABSOLUTE MAXIMUM RATING Symbol Parameter VDD * Value Unit -0.5 to +20 -0.5 to +18 -0.5 to VDD + 0.5 V V V Vi Supply Voltage: HCC Types HCF Types Input Voltage II DC Input Current (any one input) ± 10 mA Total Power Dissipation (per package) Dissipation per Output Transistor for Top = Full Package Temperature Range 200 mW 100 mW Ptot Top Operating Temperature: HCC Types HCF Types -55 to +125 -40 to +85 o Tstg Storage Temperature -65 to +150 o o C C C Stresses above those listed under ”Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress ratingonly and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for external periods may affect device reliability. * All voltage values are referred to VSS pin voltage. TRUTH TABLE FUNCTIONAL DIAGRAM STX 1 STY 1 B 0 A 0 Z X0 W Y0 1 1 0 1 X1 Y1 1 1 1 1 1 1 0 1 X2 X3 Y2 Y3 1 0 0 0 X0 1 1 0 0 0 1 1 0 X1 X2 1 0 1 1 X3 0 0 1 1 0 0 0 1 Y0 Y1 0 1 1 0 Y2 0 0 1 0 1 X 1 X Y3 High Impedance MODE Dual 4-Channel Mode 2 Outputs Single 8-Channel Mode 1 Output (Z and W tied together) X = Don’t care RECOMMENDED OPERATING CONDITIONS Symbol VDD VI Top 2/10 Parameter Supply Voltage: HCC Types HCF Types Input Voltage Operating Temperature: HCC Types HCF Types Value Unit 3 to 18 3 to 15 0 to VDD V V V -55 to +125 -40 to +85 o o C C HCC/HCF4529B BLOCK DIAGRAM 3/10 HCC/HCF4529B STATIC ELECTRICAL CHARACTERISTICS (over recommended operating conditions) Test Conditios Symbol IL Parameter Quiescent Current VIS (V) VSS (V) HCC Types HCF Types Value VDD (V) TLOW * Min. Max. 25 oC Min. Typ. Max. THIGH * Min. Max. 5 5 0.04 5 150 10 15 10 20 0.04 0.04 10 20 300 600 20 100 0.08 100 3000 5 20 0.04 20 150 10 40 0.04 40 300 15 80 0.04 80 600 Unit µA SWITCH ON Resistance OFF Channel Leakage Current 880 470 1050 1200 310 220 180 125 400 280 580 400 880 470 1050 1200 330 230 180 125 400 280 520 360 0 0 ≤ VI ≤ V DD 5 0 10 15 Resistance ∆RON (Between any 2 channels) 5 10 0 10 15 10 5 Any Channel OFF HCC Types 0 18 100 ±0.1 100 1000 nA HCC Types 0 18 100 ±0.1 100 1000 nA HCC Types 0 15 300 ±0.1 300 1000 nA HCC Types 0 15 300 ±0.1 300 1000 nA RL=1KΩ to VSS IIS < 2µA (On All OFF Channels) 5 1.5 1.5 1.5 10 15 3 4 3 4 3 4 HCC Types ∆ON 5 10 15 0 ≤ VI ≤ V DD HCC Types All Channel OFF (common OUT/IN) Any Channel OFF All Channel OFF (common OUT/IN) Ω Ω CONTROL (Address or Inhibit) V IL VIH IIH, IIL CI Input Low Voltage = VDD thru 1KΩ Input High Voltage Input Leakage Current 5 3.5 3.5 3.5 10 15 7 11 7 11 7 11 4/10 V HCC Types VI = 0/18V 18 ±0.1 ±10-3 ±0.1 ±1 HCF Types VI = 0/15V 15 ±0.3 ±10-3 ±0.3 ±1 5 7.5 Input Capacitance Any Input * TLOW = -55 oC for HCC device: -40 oC for HCF device. * THIGH = +125 oC for HCC device: +85 oC for HCF device. The Noise Margin for both ”1” and ”0” level is: 1V min. with VDD = 5 V, 2 V min. with VDD = 10 V, 2.5 V min. with VDD = 15 V V µA pF HCC/HCF4529B DYNAMIC ELECTRICAL CHARACTERISTICS (Tamb = 25 o C, C L = 50 pF, RL = 200 KΩ, o typical temperature coefficent for all VDD values is 03 %/ C, all input rise and fall times= 20 ns) Symbol Parameter Test Conditions VSS (V) VDD (V) tPLH tPHL Vin to Vout Propagation Delay Time (CL = 50pF, RL = 1KΩ) 0 tPLH tPHL Propagation Delay Time, Control to Output, Vin = V DD or VSS (Vin ≤ 10 Vdc, CL = 50pF, RL = 1 KΩ) 0 Crosstalk, Control to Output (CL = 50pF, RL = 1 KΩ, Rout = 10 KΩ) 0 Maximum Control Input Pulse Frequency (CL = 50pF, RL = 1 KΩ) 0 Sine Wave (Distortion) (Vin = 1.77 Vdc RMS Centred @ 0.0 Vdc, RL = 10 KΩ, f = 1 KHz) BW Min. Value Typ. Max. 5 20 40 10 15 10 8 20 15 5 200 400 10 15 80 50 160 120 5 5 10 15 5 5 5 5 10 15 10 12 -5 5 0.36 Bandwidth (-3 dB) (Vin = 1.77 Vdc RMS Centred @ 0.0 Vdc) (RL = 1KΩ) (RL = 10KΩ) (RL = 100KΩ) (RL = 1MΩ) -5 5 Feedthrough and Crosstalk Vout 20 Log10 V = − 50 dB in (RL = 1KΩ) (RL = 10KΩ) (RL = 100KΩ) (RL = 1MΩ) -5 35 28 27 26 Unit ns ns mV MHz % MHz 5 850 100 12 1.5 KHz 5/10 HCC/HCF4529B Plastic DIP16 (0.25) MECHANICAL DATA mm DIM. MIN. a1 0.51 B 0.77 TYP. inch MAX. MIN. TYP. MAX. 0.020 1.65 0.030 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 17.78 0.700 F 7.1 0.280 I 5.1 0.201 L Z 3.3 0.130 1.27 0.050 P001C 6/10 HCC/HCF4529B Ceramic DIP16/1 MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 20 0.787 B 7 0.276 D E 3.3 0.130 0.38 e3 0.015 17.78 0.700 F 2.29 2.79 0.090 0.110 G 0.4 0.55 0.016 0.022 H 1.17 1.52 0.046 0.060 L 0.22 0.31 0.009 0.012 M 0.51 1.27 0.020 0.050 N P Q 10.3 7.8 8.05 5.08 0.406 0.307 0.317 0.200 P053D 7/10 HCC/HCF4529B SO16 (Narrow) MECHANICAL DATA mm DIM. MIN. TYP. A a1 inch MAX. MIN. TYP. 1.75 0.1 0.068 0.2 a2 MAX. 0.004 0.007 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45° (typ.) D 9.8 E 5.8 10 0.385 6.2 0.228 0.393 0.244 e 1.27 0.050 e3 8.89 0.350 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M S 0.62 0.024 8° (max.) P013H 8/10 HCC/HCF4529B PLCC20 MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 9.78 10.03 0.385 0.395 B 8.89 9.04 0.350 0.356 D 4.2 4.57 0.165 0.180 d1 2.54 0.100 d2 0.56 0.022 E 7.37 8.38 0.290 0.330 e 1.27 0.050 e3 5.08 0.200 F 0.38 0.015 G 0.101 0.004 M 1.27 0.050 M1 1.14 0.045 P027A 9/10 HCC/HCF4529B Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use ascritical components in life support devices or systems without express written approval of SGS-THOMSON Microelectonics. 1994 SGS-THOMSON Microelectronics - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A 10/10