HGN-367A FUSED WITH DISTANCE SWITCH, IEC 60320 POWER INLET SOCKET WITH FUSE/S (5X20MM) MECHANICAL DIMENSIONS (Unit: mm) 33 2x 3.6 4 31 20 49.5 36 44 28.3 H.S. TUBING 125 C, 600V BLACK FEATURES 18 AWG, UL1015 105 C, BLUE 18 AWG, UL1015 105 C, BROWN 31.0 The HGN-367A series line filters feature an IEC connector with an integral fuse holder and distance switch; available for one or two 5 x 20mm fuses. (IEC 601 prescribes fusing both lines.) Fully enclosed metal housing prevents input of high frequency noise and protects ultra-sensitive equipment. These filters are also available for Medical equipment with low leakage current. 20+- 3 51 42.6 A ground choke can be added to enhance the grounding ability of the circuit. A bleeder resistor can also be added to prevent excessive voltages from developing across the filter capacitors when there is no load. APPLICATIONS Computer & networking equipment, Measuring & control equipment, Data processing equipment, laboratory instruments, Switching power supplies, other electronic equipment. 36.0 TECHNICAL DATA Filter • Rated Voltage: 125/250VAC • Rated Current: 1A, 2A, 3A, 4A, 6A, 8A, 10A • Power Line Frequency: 50/60Hz • Max. Leakage Current each Line to Ground: @ 250VAC 50Hz: 0.5mA @ 250VAC 50Hz: 2µA* • Hipot Rating (one minute) Line to Ground: 2250VDC Line to Line: 1450VDC • Temperature Range: -25C to +85C Switch • Rated Voltage: 250VAC • Rated Current: 8A • Temperature Range: -10C to +60C • SPST * Medical application 28.5 2x M3x0.5 20 RECOMMENDED SWITCH LAYOUT 31.2 Typ. 2x 3.5 RECOMMENDED PANEL CUTOUT (MOUNTING FROM FRONT) Specifications subject to change without notice. Dimensions (mm). See Appendix A for recommended power cord. See PDI full line catalog for detailed specifications on power cords. 145 Algonquin Parkway, Whippany, NJ 07981 • 973-560-0019 • FAX: 973-560-0076 e-mail: [email protected] • www.powerdynamics.com 73 HGN-367A Series Example & Ordering Code HGN-367A 01 A S SCHEMATICS 1 L L mH Fuse L' R Cy CX G' L Cy N LOAD 01 02 03 04 06 08 10 N' Fuse L mH G 3.0 -3.6L 8.0 6.3/0.25 2.0 -3.0L =Q SOLDER =S 2 L L mH Fuse LINE 6.6 Lg QUICK CONNECT L' R N L CX Cy G' Cy LOAD TERMINAL: = = = = = = = 5 - 1 LINE CURRENT RATING (A): Q - 1 N' Fuse L mH G NO BLEEDER RESISTOR & NO GROUND CHOKE BLEEDER RESISTOR (1/4 W, 1M) BLEEDER RESISTOR (1/2 W, 1M) BLEEDER RESISTOR (1/4 W, 1M) & GROUND CHOKE BLEEDER RESISTOR (1/2 W, 1M) & GROUND CHOKE GROUND CHOKE (100µH) COMPONENT LOCATIONS: = = = = = = 3 0 5 6 7 8 9 L 1A (mH) 6.5 1.9 3.7 * 4.6 9.5 6.5 10.5 5.0 TYPE OF MOUNTING: 74 4A (mH) 6A (mH) 1.6 0.8 0.8 0.6 1.3 * 1.7 * 1.4 6.0 1.2 0.85 2.0 0.8 0.9 0.53 1.1 0.6 N' Lg STANDARD TYPE WITH C(X) & C(Y) BEHIND L WITHOUT C(X); C(Y) ONLY WITHOUT C(Y); C(X) ONLY WITHOUT C(Y); C(X) BEHIND L = = = = = 1 2✢ 3✢ 1M 2M✢ MEDICAL SCHEMATICS 1M =A =B =C =D =E =F =G =H =I =J =K 8A (mH) 1.05 * * * * * 1.05 * * 10A (mH) 0.2 0.3 0.3 * 0.3 0.3 0.3 * 0.2 L L' R CX L N N' Fuse L mH G G' Lg 2M L M1 M2 M3 M4 M5 M6 M7 M8 M9 = BLANK FLANGE MOUNT * VDE submitted =T SNAP-IN TABS - TOP BOTTOM =S SNAP-IN TABS - SIDE L mH Fuse L' R N = = = = = = = = = L mH Fuse LINE 1A (mH) 2A (mH) 3A (mH) 4A (mH) 6A (mH) 8A (mH) 10A (mH) 6.5 3.8 2.5 1.6 0.8 1.05 0.2 1.9 1.5 1.1 0.8 0.6 * 0.3 3.7 2.7 1.8 1.3 0.8 1.05 0.3 10.5 4.2 2.5 1.7 1.05 * 0.3 4.6 3.4 2.5 1.4 0.9 * 0.3 9.5 4.3 1.8 1.2 0.85 * 0.3 6.5 4.0 2.5 2.0 0.85 1.05 0.3 6.5 4.0 2.5 2.0 0.85 1.05 0.3 10.5 4.0 1.2 0.9 0.53 * 0.3 5 3.7 1.8 1.1 0.6 * 0.2 10.5 6.5 2.5 2.7 1.05 * 0.3 2A (mH) 3A (mH) 3.8 2.5 1.5 1.1 2.7 1.8 4.2 * 3.4 2.5 4.3 1.8 4.0 2.5 4.0 1.2 3.7 * Cy L mH G Medical applications, select Attenuation code with corresponding component values from the table. Cap C(x) 0.1µF 0.015µF 0.1µF 0.1µF 0.047µF 0.033µF 0.22µF 0.047µF 0.033µF G' L Fuse LINE Cap C(y) 2200pF 3300pF 3300pF 1000pF 3300pF 3300pF 2200pF 3300pF 2200pF 2200pF * L' Cy R N ATTENUATION CODE TABLE: Non-Medical applications, select Attenuation code with corresponding component values from the table. Cap C(x) 0.1µF 0.015µF 0.1µF 0.1µF 0.047µF 0.033µF 0.22µF 0.22µF 0.047µF 0.033µF * L mH Fuse LOAD OPTIONS: Lg Fuse G L LOAD 2 FUSE (5X20MM) =1 = 2✝ LOAD 1 FUSE (5X20MM) LINE FUSE OPTION: CX N' L mH G' Lg Contact PDI for attenuation numbers Flange mount only *Contact PDI for availability ✢ ✝ 145 Algonquin Parkway, Whippany, NJ 07981 • 973-560-0019 • FAX: 973-560-0076 e-mail: [email protected] • www.powerdynamics.com