MEANWELL HLG-60H-C700

HLG-60H-C
70W Single Output LED Power Supply
E¡¡E¡½
¡E¡E
¡E¡E
¡E¡E
¡E¡E
¡E
series
Features :
Constant current design
Universal AC input / Full range (up to 305VAC)
Built-in active PFC function
High efficiency up to 91%
Protections: Short circuit / Over voltage / Over temperature
Cooling by free air convection
Output current adjustable through output cable or internal potentiometer
IP67 / IP65 design for indoor or outdoor installations
Three in one dimming function (1~10Vdc or 10V PWM signal or resistance)
Suitable for dry / damp / wet locations
5 years warranty (Note.5)
110
F
HLG-60H-C350 A
M
M
IP65 IP67
A : IP65 rated. Constant current level can be adjusted through internal potentiometer.
B : IP67 rated. Constant current level adjustable through output cable with 1~10Vdc or 10V PWM signal or resistance.
D (option) : IP67 rated. Timer dimming function, contact MEAN WELL for details.
SPECIFICATION
MODEL
RATED CURRENT
HLG-60H-C350
HLG-60H-C700
350mA
700mA
¡Ó5.0%
CURRENT ACCURACY
CONSTANT CURRENT REGION Note.6 100 ~ 200V
OUTPUT
Can be adjusted by internal potentiometer or through output cable
210 ~ 350mA
420 ~ 700mA
1500ms, 80ms / 115VAC at full load
SETUP, RISE TIME
16ms at full load
HOLD UP TIME (Typ.)
PROTECTION
0.5V
Note.7 1V
RIPPLE & NOISE
CURRENT ADJ. RANGE
INPUT
70W
¡Ó5%
RIPPLE CURRENT
VOLTAGE RANGE
50 ~ 100V
70W
RATED POWER
Note.2 90 ~ 305VAC
1000ms, 80ms / 230VAC at full load
230VAC / 115VAC
127VDC ~ 431VDC
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR (Typ.)
PF>0.98/115VAC, PF>0.96/230VAC, PF>0.94/277VAC at full load (Please refer to "Power Factor Characteristic" curve)
EFFICIENCY (Typ.)
91%
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
0.69A / 115VAC
0.35A / 230VAC
COLD START 70A / 230VAC
91%
0.29A / 277VAC
LEAKAGE CURRENT
<0.75mA / 277VAC
SHORT CIRCUIT
Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE
230 ~ 250V
120 ~ 140V
Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery
OVER TEMPERATURE
85
10 (RTH2)
Protection type : Shut down o/p voltage, re-power on to recover
WORKING TEMP.
-40 ~ +70
¢J ¡Ó ¢J
¢J (Refer to "Derating Curve")
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
10 ~ 95% RH non-condensing
¢J, 10 ~ 95% RH
¡Ó0.03%/¢J (0 ~ 50¢J)
-40 ~ +80
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY STANDARDS Note.3 UL8750, CSA C22.2 No. 250.0-08, EN61347-1, EN61347-2-13 independent, IP65 or IP67 approved
SAFETY &
EMC
WITHSTAND VOLTAGE
I/P-O/P:3.75KVAC
ISOLATION RESISTANCE
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55015, EN61000-3-2 Class C ( 60% load) ; EN61000-3-3
EMC EMISSION
EMC IMMUNITY
MTBF
OTHERS
DIMENSION
PACKING
NOTE
I/P-FG:2KVAC
O/P-FG:0.5KVAC
¡Ù
¢J
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, heavy industry level (surge L,N-FG: 4KV), criteria A
338K hrs min. MIL-HDBK-217F (25 )
171*61.5*36.8 mm (L*W*H)
0.73Kg; 20pcs/15.6Kg/0.8CUFT
¢J
¢J
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Derating may be needed under low input voltages. Please check the static characteristics for more details.
3. Safety and EMC design refer to EN60598-1, CNS15233, GB7000.1.
4. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
5. Refer to warranty statement.
6. Constant current operation region is within 50% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please
reconfirm special electrical requirements for some specific system design.
7. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 2.2uf parallel capacitor.
MeanWell Direct Tel: +44 (0)118 970 3858 E-mail: [email protected]
File Name:HLG-60H-C-SPEC 2012-05-25
HLG-60H-C
70W Single Output LED Power Supply
Mechanical Specification
Case No.957
series
Unit:mm
A Type:(HLG-60H-C_A)
171
147.2
11.9
9.6
¡Ó
¡Ó
300 20
32
46.5
61.5
300 20
AC/L(Brown)
AC/N(Blue)
FG (Green/Yellow)
30.75
¡Ñ
T case
SJTW 16AWG 3C
73.6
+V(Red)
-V(Black)
¡Ñ
SJTW 16AWG 2C
Io
ADJ
£r4.2¡Ñ4PL
¡° T case: Max. Case Temperature.
36.8
Optional
¡°Optional output water proof connector : T.B.D.
1
2
PIN1: +V
¡° IP65 rated. Constant current level can be adjusted through internal potentiometer.
PIN2: -V
(Can access by removing the rubber stopper on the case.)
B Type:(HLG-60H-C_B)
171
147.2
11.9
¡Ó
9.6
300 20
¡Ó
T case
¡° T case: Max. Case Temperature.
+V(Red)
-V(Black)
¡Ñ
73.6
30.75
¡Ñ
SJTW 16AWG 3C
32
46.5
61.5
300 20
SJTW 16AWG 2C
DIM+(Blue)
DIM-(White)
£r4.2¡Ñ4PL
Optional
36.8
AC/L(Brown)
AC/N(Blue)
FG (Green/Yellow)
¡Ñ
SJTW 16AWG 2C
¡°Optional output water proof connector : T.B.D.
PIN1: +V
PIN2: -V
1
3
4
2
PIN3: DIM+
PIN4: DIM-
File Name:HLG-60H-C-SPEC 2012-05-25
MeanWell Direct Tel: +44 (0)118 970 3858 E-mail: [email protected]
HLG-60H-C
70W Single Output LED Power Supply
series
D Type:(HLG-60H-C_D)
171
147.2
11.9
9.6
¡Ó
¡Ó
300 20
300 20
T case
32
46.5
61.5
AC/L(Brown)
AC/N(Blue)
FG (Green/Yellow)
30.75
¡Ñ
73.6
SJTW 16AWG 3C
+V(Red)
-V(Black)
¡Ñ
SJTW 16AWG 2C
£r4.2¡Ñ4PL
¡° T case: Max. Case Temperature.
36.8
Optional
¡°Optional output water proof connector : T.B.D.
1
2
PIN1: +V
¡° IP67 rated. Timer dimming function, contact MEAN WELL for details.
PIN2: -V
Block Diagram
PFC fosc : 60KHz
PWM fosc : 80KHz
EMI FILTER
&
RECTIFIERS
I/P
RECTIFIERS
&
FILTER
POWER
SWITCHING
PFC
CIRCUIT
+V
-V
DIM+
DIM(B Type)
O.L.P.
O.L.P.
O.T.P.
FG
DETECTION
CIRCUIT
PWM & PFC
CONTROL
O.V.P.
Derating Curve
Static Characteristics
100
100
90
80
80
70
LOAD (%)
LOAD (%)
60
40
20
-40
-25
-10
0
15
30
50
¢J
AMBIENT TEMPERATURE ( )
60
70
(HORIZONTAL)
60
50
40
90
100
125
135
145
155 165
175
180
200
230
305
INPUT VOLTAGE (V) 60Hz
File Name:HLG-60H-C-SPEC 2012-05-25
MeanWell Direct Tel: +44 (0)118 970 3858 E-mail: [email protected]
70W Single Output LED Power Supply
HLG-60H-C
series
Power Factor Characteristic
PF
Constant Current Mode
1
0 .9 9
0 .9 8
0 .9 7
0 .9 6
0 .9 5
0 .9 4
0 .9 3
0 .9 2
0 .9 1
0 .9
0 .8 9
0 .8 8
0 .8 7
0 .8 6
0 .8 5
0 .8 4
0 .8 3
0 .8 2
0 .8 1
0 .8
0 .7 9
0 .7 8
0 .7 7
0 .7 6
0 .7 5
277VAC
230VAC
115VAC
50%
60%
70%
80%
90%
100%
(70W)
LOAD
EFFICIENCY vs LOAD (HLG-60H-C700A Model)
EFFICIENCY (%)
HLG-60H-C series possess superior working efficiency that up to 91% can be reached in field applications.
93
92
91
90
89
88
87
86
85
84
83
82
81
80
79
78
277VAC
230VAC
115VAC
10%
20%
30%
40%
50%
60%
70%
80%
90% 100%
LOAD
DRIVING METHODS OF LED MODULE
A typical LED power supply may work in "constant current mode (CC)" to drive the LEDs.
Mean Well's LED power supply with CC characteristic can be operated at CC mode (direct drive, at area (A)).
(A)
Constant
Current area
Vo(%)
100
50
(max.)
(B)
Hiccup
Protection
50
95
Io (%)
Typical LED power supply I-V curve
File Name:HLG-60H-C-SPEC 2012-05-25
MeanWell Direct Tel: +44 (0)118 970 3858 E-mail: [email protected]
HLG-60H-C
70W Single Output LED Power Supply
series
DIMMING OPERATION
AC/L(Brown)
AC/N(Blue)
FG (Green/Yellow)
+V(Red)
-V(Black)
HLG-60H-C
DIM+(Blue)
DIM-(White)
¡° Built-in 3 in 1 dimming function, IP67 rated. Output constant current level can be adjusted through output cable by connecting a resistance or
1 ~ 10Vdc or 10V PWM signal between DIM+ and DIM-.
¡° Please DO NOT connect "DIM-" to "-V".
¡° Reference resistance value for output current adjustment (Typical)
£[
£[
£[
£[
£[
£[
£[
£[
£[
£[
£[
£[
£[
£[
£[
£[
£[
£[
£[
£[
Single driver
20K
30K
40K
50K
70K
80K
90K
100K
10K
60K
Resistance
Multiple drivers
value
(N=driver quantity for synchronized 10K
/N 20K /N 30K /N 40K /N 50K /N 60K /N 70K /N 80K /N 90K /N 100K /N
dimming operation)
OPEN
-----
Percentage of rated current
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
95%~105%
Dimming value
1V
2V
3V
4V
5V
6V
7V
8V
9V
10V
OPEN
Percentage of rated current
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
95%~105%
Duty value
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
OPEN
Percentage of rated current
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
95%~105%
¡° 1 ~ 10V dimming function for output current adjustment (Typical)
¡° 10V PWM signal for output current adjustment (Typical): Frequency range :100Hz ~ 3KHz
¡°Using the built-in dimming function on B-type model can't turn the lighting fixture totally dark. Please refer to the connection method below to
achieve 0% brightness of the lighting fixture connecting to the LED power supply unit.
¡°Direct connecting to LEDs is suggested, but is not suitable for using additional drivers.
Dimming connection diagram for turning the lighting fixture ON/OFF :
N
FG
L
Switch
Relay
Adjuster
0~100K Ohms resistance
1~10V DC Voltage
10V PWM Signal
Green/
Yellow
Brown
Blue
AC/L
HLG-60H-C
B Type
AC/N
DIM+
DIMV(-)
V(+)
Blue
White
Black
Red
LED Lighting Fixture
Using a switch and relay can turn ON/OFF the lighting fixture.
1.Output constant current level can be adjusted through output cable by connecting a resistance or 1~10Vdc or 10V PWM signal between DIM+ and DIM-.
2.The LED lighting fixture can be turned ON/OFF by the switch.
File Name:HLG-60H-C-SPEC 2012-05-25
MeanWell Direct Tel: +44 (0)118 970 3858 E-mail: [email protected]
HLG-60H-C
70W Single Output LED Power Supply
series
WATERPROOF CONNECTION
¡· Waterproof connector
Waterproof connector can be assembled on the output cable of HLG-60H-C to operate in dry/wet/damp or outdoor environment.
AC
source
HLG-60H-C
I/P
Size
O/P
Pin Configuration (Female)
M12
Order No.
Suitable Current
4-PIN
5A/PIN
M12-04
10A max.
5-PIN
5A/PIN
M12-05
10A max.
Size
Pin Configuration (Female)
M15
2-PIN
12A/PIN
M15-02
12A max.
Order No.
Suitable Current
LED Lamp
¡· Cable Joiner
CJ04-1 suitable for 14AWG~16AWG
CJ04-2 suitable for 18AWG~22AWG
20
£r25
66
26
Up to four wires can be connected through this cable joiner by
soldering or clamping by tools.
LED Lamp
HLG-60H-C
O/P Wires
¡°CJ04 cable joiner can be purchased independently for user's own assembly.
MEAN WELL order No. : CJ04-1, CJ04-2.
File Name:HLG-60H-C-SPEC 2012-05-25
MeanWell Direct Tel: +44 (0)118 970 3858 E-mail: [email protected]