Agilent Sun Power Series HLMP-CB15, HLMP-CM15, HLMP-CB30, HLMP-CM30 T-13/4 (5 mm) Precision Optical Performance InGaN Blue and Green Lamps Data Sheet Features • Well defined spatial radiation pattern • Viewing angles: 15˚ and 30˚ • High luminous output • Colors: 472 nm Blue, 526 nm Green Description These high intensity blue and green LEDs are based on InGaN material technology. InGaN is the most efficient and cost effective material for LEDs in the blue and green region of the spectrum. The 472 nm typical dominant wavelength for blue and 526 nm typical dominant wavelength for green are well suited to color mixing in full color signs. These LED lamps are untinted, nondiffused, T-13/4 packages incorporating second generation optics producing well defined spatial radiation patterns at specific viewing cone angles. These lamps are made with an advanced optical grade epoxy, offering superior high temperature and high moisture resistance performance in outdoor signal and sign applications. The high maximum LED junction temperature limit of +130˚C enables high temperature operation in bright sunlight conditions. The package epoxy contains both UV-A and UV-B inhibitors to reduce the effects of long term exposure to direct sunlight. • Superior resistance to moisture • UV resistant epoxy Benefits • Superior performance in outdoor environments • Wavelengths suitable for color mixing in full color (RGB) signs Applications • Commercial outdoor signs • Automotive interior lights • Front panel indicators These lamps are available in two viewing angle options to give the designer flexibility with optical design. • Front panel backlighting CAUTION: HLMP-CBxx and HLMP-CMxx LEDs are Class 1 ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Agilent Application Note AN-1142 for additional details. LED Indicators Device Selection Guide Part Number HLMP-CB15-P00xx HLMP-CB15-R00xx HLMP-CB16-P00xx HLMP-CB30-K00xx HLMP-CB30-M00xx HLMP-CB31-M00xx HLMP-CM15-S00xx HLMP-CM15-W00xx HLMP-CM16-S00xx HLMP-CM30-M00xx HLMP-CM30-S00xx HLMP-CM31-M00xx Typical Viewing Angle 15˚ 15˚ 15° 30˚ 30˚ 30° 15˚ 15˚ 15° 30˚ 30˚ 30° Color and Dominant Wavelength λd (nm) Typ. Blue 472 Blue 472 Blue 472 Blue 472 Blue 472 Blue 472 Green 526 Green 526 Green 526 Green 526 Green 526 Green 526 Luminous Intensity, Iv (mcd) Min. 880 1500 880 310 520 520 1900 5500 1900 520 1900 520 Part Numbering System HLMP - X X XX - X X X XX Mechanical Options 00: Bulk DD: Ammo Pack Color Bin Selection 0: Full color range Maximum Intensity Bin 0: No maximum Iv bin limit Minimum Intensity Bin Refer to device selection guide Viewing Angle and Standoff Options 15: 15 degree without standoff 16: 15 degree with standoff 30: 30 degree without standoff 31: 30 degree with standoff Color B: Blue M: Green Package C: T-1 3/4 (5 mm) round lamp 2 Leads with Stand-Offs No No Yes No No Yes No No Yes No No Yes Package Drawing A A B A A B A A B A A B Package Dimensions 5.00 ± 0.20 (0.197 ± 0.008) 5.00 ± 0.20 (0.197 ± 0.008) 8.71 ± 0.20 (0.343 ± 0.008) 1.14 ± 0.20 (0.045 ± 0.008) d 8.71 ± 0.20 (0.343 ± 0.008) 1.14 ± 0.20 (0.045 ± 0.008) 2.35 (0.093) MAX. 0.70 (0.028) MAX. 31.60 MIN. (1.244) 31.60 MIN. (1.244) 1.50 ± 0.15 (0.059 ± 0.006) 0.70 (0.028) MAX. CATHODE LEAD CATHODE LEAD 1.00 MIN. (0.039) 0.50 ± 0.10 SQ. TYP. (0.020 ± 0.004) 5.80 ± 0.20 (0.228 ± 0.008) CATHODE FLAT 2.54 ± 0.38 (0.100 ± 0.015) HLMP-Cx15 and HLMP-Cx30 1.00 MIN. (0.039) CATHODE FLAT 0.50 ± 0.10 SQ. TYP. (0.020 ± 0.004) 5.80 ± 0.20 (0.228 ± 0.008) 2.54 ± 0.38 (0.100 ± 0.015) HLMP-Cx16 and HLMP-Cx31 HLMP-Cx16 HLMP-Cx31 d = 12.60 ± 0.25 d = 12.22 ± 0.50 (0.496 ± 0.010) (0.481 ± 0.020) Notes: 1. Dimensions in mm. 2. Tolerance ±0.1 mm unless otherwise noted. 3 Absolute Maximum Ratings at TA = 25˚C Parameter DC Forward Current[1] Peak Pulsed Forward Current Average Forward Current Reverse Voltage (IR = 100 µA) Power Dissipation LED Junction Temperature Operating Temperature Range Storage Temperature Range Soldering Temperature Blue and Green 30 mA 100 mA 30 mA 5V 120 mW 130˚C –40˚C to +80˚C –40˚C to +100˚C 260˚C for 5 seconds Note: 1. Derate linearly as shown in Figure 5 for temperatures above 50˚C. Electrical/Optical Characteristics at TA = 25˚C Parameter Forward Voltage HLMP-CB1x-P0000 HLMP-CB15-R0000 HLMP-CB3x-K0000 HLMP-CB3x-M0000 HLMP-CM1x-S0000 HLMP-CM15-W0000 HLMP-CM3x-M0000 HLMP-CM30-S0000 Reverse Voltage Peak Wavelength Blue (λd = 472 nm) Green (λd = 526 nm) Spectral Halfwidth Blue (λd = 472 nm) Green (λd = 526 nm) Capacitance Luminous Efficacy Blue (λd = 472 nm) Green (λd = 526 nm) Thermal Resistance 4 Symbol Min. VF VR Typ. Max. Units Test Conditions 3.8 3.5 3.8 3.8 3.8 3.5 3.8 3.5 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 V IF = 20 mA 5 λpeak 470 524 nm ∆λ1/2 35 47 43 nm 75 520 240 lm/W C ηv RΘJ-PIN pF ˚C/W IR = 100 µA Peak of Wavelength of Spectral Distribution at IF = 20 mA Wavelength Width at Spectral Power Point at IF = 20 mA VF = 0, F = 1 MHz Emitted Luminous Power/Emitted Radiant Power LED Junction-toCathode Lead 30 GREEN 30 25 0.7 0.6 0.5 0.4 0.3 0.2 20 15 10 5 0.1 0 400 450 500 550 600 650 700 0.5 0 0 5 10 15 20 25 35 0.9 30 25 20 15 10 5 0 DOMINANT WAVELENGTH – nm NORMALIZED INTENSITY 40 60 80 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0 10 20 30 40 ANGULAR DISPLACEMENT – DEGREES Figure 7. Spatial radiation pattern – 30˚ lamps. 545 0.6 0.5 0.4 0.3 0.2 478 1.02 477 1.00 475 535 474 473 GREEN 525 472 BLUE 0 20 40 60 80 100 FORWARD CURRENT – mA Figure 8. Color vs. forward current. -10 0 10 20 30 Figure 6. Spatial radiation pattern – 15˚ lamps. 476 530 -20 ANGULAR DISPLACEMENT – DEGREES 540 520 0.7 0 -30 100 550 0.1 5 20 Figure 5. Maximum forward current vs. ambient temperature. 0.9 0.8 0.1 TA – AMBIENT TEMPERATURE – °C 1.0 0 -40 -30 -20 -10 Figure 3. Forward current vs. forward voltage (for HLMP-CB1x-P0000, HLMP-CB30-K0000, HLMP-CB3x-M0000, HLMP-CM1x-S0000 and HLMP-CM3x-M0000). 1.0 IF – FORWARD CURRENT – mA Figure 4. Relative luminous intensity vs. forward current. 5 40 0 30 10 VF – FORWARD VOLTAGE – V NORMALIZED INTENSITY IF – FORWARD CURRENT – mA INTENSITY NORMALIZED AT 20 mA 1.0 15 FORWARD VOLTAGE Figure 2. Forward current vs. forward voltage (for HLMP-CB15-R0000, HLMP-CM15-W0000 and HLMP-CM30-S0000). 1.5 20 0 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 4.2 WAVELENGTH – nm Figure 1. Relative intensity vs. wavelength. 25 0 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 471 120 NORMALIZED INTENSITY BLUE 0.8 FORWARD CURRENT RELATIVE INTENSITY 0.9 IF – FORWARD CURRENT – mA 1.0 0.98 0.96 0.94 0.90 0.5 0.88 0 20 40 60 80 DEGREES C Figure 9. Normalized Iv vs. T (green). 100 Color Bin Limits (nm at 20 mA) Intensity Bin Limits Blue Bin ID 1 Color Range (nm) Min. Max. 460.0 464.0 2 464.0 468.0 3 468.0 472.0 4 472.0 476.0 5 476.0 480.0 Bin Name K L M N P Q R S T U V W Tolerance for each bin limit is ± 0.5 nm. Green Bin ID 1 Color Range (nm) Min. Max. 520.0 524.0 2 524.0 528.0 3 528.0 532.0 4 532.0 536.0 5 536.0 540.0 Tolerance for each bin limit is ± 0.5 nm. Note: 1. All bin categories are established for classification of products. Products may not be available in all bin categories. Please contact your Agilent representatives for further information. 6 Min. 310 400 520 680 880 1150 1500 1900 2500 3200 4200 5500 Max. 400 520 680 880 1150 1500 1900 2500 3200 4200 5500 7200 Tolerance of each minimum and maximum is ± 15%. www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (408) 654-8675 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6271 2451 India, Australia, New Zealand: (+65) 6271 2394 Japan: (+81 3) 3335-8152(Domestic/International), or 0120-61-1280(Domestic Only) Korea: (+65) 6271 2194 Malaysia, Singapore: (+65) 6271 2054 Taiwan: (+65) 6271 2654 Data subject to change. Copyright © 2003 Agilent Technologies, Inc. Obsoletes 5988-7309EN January 16, 2003 5988-8658EN