T-13/4 (5 mm), T-1 (3 mm) Blue LED Lamps Technical Data HLMP-DB25-B00xx HLMP-KB45-A00xx Features Description • Popular T-13/4 and T-1 Diameter Packages • General Purpose Leads • Reliable and Rugged • Available on Tape and Reel • Binned for Color and Intensity These blue LEDs are designed in industry standard T-1 and T-13/4 package with clear and non diffused optics. They are also available in tape and reel, and ammo-pack option for ease of handling and use. Applications • Status Indicators • Small Message Panel • Running and Decorative Lights for Commercial Use These blue lamps are ideal for use as indicators and for general purpose lighting. Blue lamps offer color differentiation as blue is attractive and not widely available. Package Dimensions 5.08 (0.200) 4.57 (0.180) 3.18 (0.125) 2.67 (0.105) 3.43 (0.135) 2.92 (0.115) 9.19 (0.352) 8.43 (0.332) 4.70 (0.185) 4.19 (0.165) 6.35 (0.250) 5.58 (0.220) 1.02 (0.040) NOM. 0.89 (0.035) 0.64 (0.025) 23.0 MIN. (0.90) 23.0 (0.90) MIN. 0.45 (0.018) SQUARE NOMINAL 0.45 (0.018) SQUARE NOM. CATHODE 2.54 (0.100) NOM. 1.27 (0.050) NOM. 1.27 (0.050) NOM. 6.10 (0.240) 5.59 (0.220) CATHODE 2.54 (0.100) NOM. HLMP-KB45 HLMP-DB25 NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. EPOXY MENISCUS MAY EXTEND ABOUT 1 mm (0.040") DOWN THE LEADS. CAUTION: Devices are Class II ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Application Note AN-1142 for additional details. 2 Selection Guide Luminous Intensity Iv (mcd) Part Number HLMP-KB45-A00xx HLMP-DB25-B00xx Package T-1 T-1 3/4 Viewing Angle 40 25 Part Numbering System HLMP - x x xx - x x x xx Mechanical Option 00: Bulk 02: Tape & Reel, Straight Leads DD: Ammo Pack Color Bin Options 0: Full Color Bin Distribution Maximum Iv Bin Options 0: Open (no max. limit) Minimum Iv Bin Options Please refer to the Iv Bin Table Viewing Angle 25: 25 degrees 45: 40 degrees Color Options B: Blue 462 nm Package Options D: T-1 3/4 (5 mm) K: T-1 (3 mm) Absolute Maximum Ratings at TA = 25˚C Parameter Blue Units Peak Forward Current 70 mA DC Current[1] 30 mA Reverse Voltage (IR = 100 µA) 5 V Transient Forward Current[2] (10 µsec Pulse) 350 mA LED Junction Temperature 115 ˚C Operating Temperature –20 to +80 ˚C Storage Temperature –30 to +100 ˚C Lead Soldering Temperature [1.6 mm (0.063 in.) from body] 260°C for 5 seconds Notes: 1. Derate linearly from 50 °C as shown in Figure 6. 2. The transient peak current is the maximum non-recurring peak current that can be applied to the device without damaging the LED die and wirebond. It is not recommended that this device be operated at peak currents above the Absolute Maximum Peak Forward Current. Min. 30 40 Max. – – 3 Optical Characteristics at TA = 25˚C HLMP-DB25-B00xx Luminous Intensity IV (mcd) @ IF = 20 mA Min. Typ. 40 100 HLMP-KB45-A00xx 30 Part Number Color, Dominant Wavelength λd[1] (nm) Typ. Peak Wavelength λPEAK (nm) Typ. Viewing Angle 2θ1/2 [2] Degrees Typ. 462 426 25 462 426 40 45 Notes: 1. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 2. θ 1/2 is the off-axis angle at which the luminous intensity is half of the axial luminous intensity. Electrical Characteristics at TA = 25˚C Part Number Forward Reverse Voltage Breakdown VF (Volts) VR (Volts) @ IF = 20 mA @ IR = 100 µA Typ. Max. Min. Typ. Speed Response τs (ns) Typ. Thermal Resistance Capacitance RθJ-PIN (°C/W) C (pF), VF = 0, Junction to f = 1 MHz Cathode Lead Typ. Typ. HLMP-DB25-B00xx 4.0 5.0 5.0 30 500 97 260 HLMP-KB45-A00xx 4.0 5.0 5.0 30 500 97 290 0.5 0 350 400 450 500 550 600 650 700 WAVELENGTH – nm Figure 1. Relative Intensity vs. Wavelength. RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) IF – FORWARD CURRENT – mA RELATIVE INTENSITY 1.6 60 1.0 50 40 30 20 10 0 0 1 2 3 4 VF – FORWARD VOLTAGE – V Figure 2. Forward Current vs. Forward Voltage. 5 1.4 1.2 1.0 20 30 40 50 60 70 80 IP – PEAK FORWARD CURRENT – mA Figure 3. Relative Intensity vs. Peak Forward Current (300 µs pulse width, 10 ms period). Hz Hz FR RE HR ES AT E PULSE WIDTH (SECONDS) 10° 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 5 10 15 20 25 30 35 IF – DC FORWARD CURRENT – mA Figure 4. Forward Current vs. Forward Voltage. 20° 35 1.2 1.1 1.0 0.9 0.8 IF – FORWARD CURRENT – mA DC 300 Hz Hz 100 1K z KH 3K 1 1.00E-06 1.00E-05 1.00E-04 1.00E-03 1.00E-02 RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) 10 10 RATIO OF PEAK CURRENT TO TEMPERATURE DERATED DC CURRENT 4 Figure 5. Relative Luminous Intensity vs. Forward Current. 30 25 20 15 10 5 0 0 10 20 30 40 50 60 70 80 90 TA – AMBIENT TEMPERATURE – °C Figure 6. Maximum DC Forward Current vs. Ambient Temperature. Derating Based on TJ Max. = 115 °C. 0° 1.0 30° .8 40° 50° .6 60° .4 70° .2 80° 90° 10° 20° 30° 40° 50° 60° 70° 80° 90°100° Figure 7. Relative Luminous Intensity vs. Angular Displacement for HLMP-DB25. 20° 10° 0° 1.0 30° 40° .8 50° .6 60° 70° 80° 90° .4 .2 10° 20° 30° 40° 50° 60° 70° 80° 90°100° Figure 8. Relative Luminous Intensity vs. Angular Displacement for HLMP-KB45. Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloroethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts. For information on soldering LEDs, please refer to Application Note 1027. 5 Intensity Bin Limits Intensity Range (mcd) Min. Max. 30.0 40.0 40.0 50.0 50.0 65.0 65.0 85.0 85.0 110.0 110.0 140.0 140.0 180.0 180.0 240.0 240.0 310.0 310.0 400.0 400.0 520.0 520.0 680.0 680.0 880.0 Bin A B C D E F G H J K L M N Color Bin Limits (nm at 20 mA) Blue Bin ID 1 nm @ 20 mA Min. Max. 460.0 464.0 2 464.0 468.0 3 468.0 472.0 4 472.0 476.0 5 476.0 480.0 Tolerance for each bin limit will be ± 0.5nm. Mechanical Option Matrix Mechanical Option Code Definition 00 Bulk Packaging, minimum increment 500 pcs/bag 02 Tape & Reel, straight leads, minimum increment 1300 pcs/bag DD Ammo Pack, straight leads with minimum increment Note: All categories are established for classification of products. Products may not be available in all categories. Please contact your local Agilent representative for further clarification/information. www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (408) 654-8675 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152 (Domestic/International), or 0120-61-1280 (Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843 Data subject to change. Copyright © 2003 Agilent Technologies, Inc. Obsoletes 5988-2226EN May 12, 2003 5988-9507EN