Extractor Tool Extractor Tool Instruction Sheet Order No. 11-03-0006 (HT2038) FEATURES This Extractor Tool is for the removal of 2.36mm (.093”) Diameter Series pin and socket male and female terminals in both plugs and receptacles. SCOPE Products: 2.36mm (.093") Diameter, Standard .093" Pin and Socket Crimp Terminals. Terminal Series No. 1189 1190 1376 1377 1380 1381 1433 1434 1973 2151 2152 2269 2273 2605 2606 2870 2871 4272 4549 4550 6271 6310 Doc No: ATS-011030006 Revision: D 02-09-1101 02-09-1102 02-09-1103 02-09-1104 02-09-2101 02-09-2101 02-09-2103 02-09-2131 02-09-2132 02-09-1131 02-09-2116 02-09-2117 02-09-2118 02-09-1115 02-09-1116 02-09-1117 02-09-1118 02-09-1141 02-09-1142 02-09-1143 02-09-2141 02-09-2143 02-09-8103 02-09-1201 02-09-2201 02-09-1105 02-09-1122 02-09-1145 02-09-8113 02-09-2136 02-09-1136 02-09-1149 02-09-2166 02-09-1205 02-09-1208 02-09-1209 02-09-3101 02-09-3102 02-09-3103 02-09-3104 02-09-4101 02-09-4101 02-09-4104 02-09-2133 02-09-2134 02-09-1133 02-09-2119 02-09-2127 02-09-6122 02-09-1119 02-09-1129 02-09-1130 02-09-5130 02-09-1144 02-09-5146 02-09-5147 02-09-2149 02-09-6144 02-09-8104 02-09-1202 02-09-2202 02-09-1106 02-09-1123 02-09-1146 02-09-8114 02-09-2137 02-09-1137 02-09-1151 02-09-2167 02-09-1206 02-09-1212 02-09-1211 Terminal Order No. 02-09-5100 39-00-0071 39-00-0281 02-09-5102 39-00-0072 39-00-0282 02-09-5106 39-00-0135 39-00-0288 02-09-5111 39-00-0136 39-00-0289 02-09-6100 02-09-6110 39-00-0296 02-09-6101 39-00-0105 39-00-0297 02-09-6106 39-00-0106 39-00-0298 02-09-4102 02-09-6132 02-09-6134 02-09-4103 02-09-6133 02-09-6138 02-09-1134 02-09-5132 02-09-5134 02-09-6123 39-00-0283 39-00-0304 02-09-6125 39-00-0302 39-00-0305 02-09-6126 39-00-0303 39-00-0306 02-09-5133 39-00-0285 39-00-0310 02-09-5142 39-00-0307 39-00-0311 02-09-5143 39-00-0308 39-00-0312 39-00-0284 39-00-0309 39-00-0313 39-00-0315 39-00-0318 39-00-0321 39-00-0316 39-00-0319 39-00-0322 39-00-0317 39-00-0320 98-00-0228 02-09-6145 39-00-0324 39-00-0326 39-00-0323 39-00-0325 40-01-1107 02-09-8107 02-09-8108 02-09-8109 02-09-1203 02-09-1204 02-09-5202 02-09-3202 02-09-6202 02-09-6203 02-09-1135 39-00-0382 02-09-8116 02-09-2138 02-09-1138 39-00-0290 39-00-0291 39-00-0292 39-00-0293 3900-0299 3900-0300 3900-0301 02-09-6140 50-34-8508 50-34-8510 40-01-1138 40-01-1139 39-00-0294 39-00-0295 50-29-1617 50-34-8509 50-34-8511 39-00-0314 40-01-1191 40-01-1192 98-00-0230 98-00-0249 98-00-0250 02-09-5203 02-09-1140 39-00-0383 39-00-0384 39-00-0385 39-00-0386 02-09-1139 02-09-3203 02-09-5169 02-09-5170 02-09-5207 02-09-5208 02-09-5205 02-09-5206 Release Date: 01-31-02 Revision Date: 03-25-08 UNCONTROLLED COPY Page 1 of 3 Extractor Tool Terminal Series No. 7238 7239 8058 41483 42477 42478 Terminal Order No. 02-09-1111 02-09-2111 02-09-1148 02-09-1153 02-09-1615 02-09-2611 02-09-1112 02-09-2112 02-09-1158 02-09-1154 02-09-1616 02-09-2612 02-09-2153 02-09-2154 02-09-5114 02-09-5115 02-09-5116 02-09-1155 02-09-1156 02-09-2613 OPERATION: CAUTION: This extractor tool should be used to extract the terminal only. Using it for unintended purposes may cause injury or damage to parts. Be careful not to deform the end of the terminal. 1. The Extractor Tool must be In Line with the terminal as shown. Push terminal forward in arrow direction before using the Extractor Tool, (See Figure 1). RETRACTABLE SPRING LOADED TUBE HANDLE TERMINAL RETRACTABLE SPRING LOADED TUBE TERMINAL PUSH-OUT PIN (SOLID) TERMINAL LOCKING TABS Figure 1 Figure 2 CONNECTOR HOUSING CONNECTOR HOUSING 2. The Retractable Spring Loaded Tube must depress the Locking Tabs on the terminal before it contacts the Terminal Push out pin. Rotate Extractor Tool while following above instructions, (See Figure 2). Doc No: ATS-011030006 Revision: D Release Date: 01-31-02 Revision Date: 03-25-08 UNCONTROLLED COPY Page 2 of 3 Extractor Tool TERMINAL PUSH-OUT PIN (SOLID) RETRACTABLE TUBE CONNECTOR HOUSING TERMINAL Figure 3 3. The terminal push-out pin (solid) pushes the terminal back through the connector hole as the retractable tube recedes into the handle. Always re-spread the locking tabs when reinserting the same terminal. 4. Molex does not offer repair parts for Extractor Tools due to the inexpensive nature of these tools. Americas Headquarters Lisle, Illinois 60532 U.S.A. 1-800-78MOLEX [email protected] Far East North Headquarters Yamato, Kanagawa, Japan 81-462-65-2324 [email protected] Far East South Headquarters Jurong, Singapore 65-6-268-6868 [email protected] European Headquarters Munich, Germany 49-89-413092-0 [email protected] Corporate Headquarters 2222 Wellington Ct. Lisle, IL 60532 U.S.A. 630-969-4550 Fax: 630-969-1352 Visit our Web site at http://www.molex.com Doc No: ATS-011030006 Revision: D Release Date: 01-31-02 Revision Date: 03-25-08 UNCONTROLLED COPY Page 3 of 3