D99-516E2P2B2M1 Panelview Enhancing the Vision AMLCD PRODUCT - MODEL LC050 Ruggedized 5.0" Display Head Assembly with Backlight (320 x 234) OVERVEIW White Electronic Designs' 5.0" sunlight readable display head assembly with backlight is ruggedized for harsh environments. Off-the-shelf AMLCD technology combined with proven ruggedization techniques provides a cost-effective, multifunctional display assembly for commercial, industrial, and military applications. Our unique patented SBLR (Super Bright Low Reflectance) technology provides optimal readability even in bright sunlight. 5.0" TFT Color Active Matrix LCD Landscape Mode 4:3 Aspect Ratio ±55°(H); +35°/-55°(V) Viewing Angle @ 5:1 C/R ENVIRONMENTAL CHARACTERISTICS 1/4 VGA 320 x 234 Resolution ■ Temperature: Accepts 2 Channels RGB Analog Input Accepts NTSC Composite Video Accepts S-Video (Y/C) Anti-reflective SBLR Technology Operating: -40°C to +85°C Non Operational: -40°C to +85°C High Bright/Long Life Backlight INTERFACE CHARACTERISTICS 1000:1 Wide Dimming Range Over Temperature Driver Signal Compatibility Accepts RGB Analog using NTSC or PAL timing Accepts External Dot Clock LCD PANEL SPECIFICATIONS Parameter Specification Units Panel Dimensions Screen Size Active Viewing Area Display Format Viewing Orientation Dot Pitch Pixel Configuration Display Mode 111.6(H) x 85.3(V) 127 mm (5.0" diag.) 102.7(H) x 74.9(V) 320 x RGB x 234 6 O'clock 0.107(H) x 0.320(V) RGB Vertical Stripe Normally White mm mm mm pixels Accepts Discrete and Composite Sync Signals mm Note: This data sheet is subject to change or cancellation without notice. May 2003 Rev. 3 ECD #13933 1 Panelview (503) 690-2460 www.panelview.com Panelview is a subsidiary of White Electronic Designs Corporation D99-516E2P2B2M1 Panelview Enhancing the Vision FIG. 1 DISPLAY HEAD ASSEMBLY BLOCK DIAGRAM Video Interface Video RGB - 1 RGB - 2 Power/Ground Composite Video Pin# 1) VB2 2) GND 3) VR2 4) VG2 5) VB1 6) VSL 7) VR1 8) VG1 9) VBS 10) CRM 11) CLKC 12) VSH 13) VSW 14) GND 15) SAM 16) VMS 17) CLK 18) N/P 19) HSY 20) VSY Active Area 5.0” diagonal 320(H)xRGBx234(V) Light Backlight Controller Power/Ground Lum. Control (0 - 5V) External Shutdown Panelview Hillsboro, OR (503) 690-2460 Panelview is a subsidiary of White Electronic Designs Corporation Pin# 1) +12V(2)_RTN 2) EXTSHDW 3) +CONTROL 4) +CONTROL_RTN 5) +12V(2) 6) Open 7) LAMPMNT 8) Open 9) +12V(1) 10) +12V(1)_RTN 2 Lamp Assembly Lamp Maintenance Bit D99-516E2P2B2M1 Panelview Enhancing the Vision FIG. 2 MECHANICAL OUTLINE DIMENSIONS FRONT VIEW 4.75 LCD MOUNTING PLATE 4.02 ACTIVE VIEWING AREA 0.12 2.00 0.10 0.24 0.21 1.47 3.35 GLASS 2.94 ACTIVE VIEWING AREA 3.51 4.39 GLASS SIDE VIEW 1.88 0.19 ± 0.015 GLASS STACK BACKLIGHT ASSY INVERTER ASSY 5.0" LCD ASSY AIC ASSY ALL DIMENSIONS ARE IN INCHES 3 Panelview (503) 690-2460 www.panelview.com Panelview is a subsidiary of White Electronic Designs Corporation D99-516E2P2B2M1 Panelview Enhancing the Vision SPECIFICATION INPUT SIGNALS This is the specification for the high performance Backlight System that is used to illuminate a 5.0inch AMLCD display head. +12V(1), +12V(1)_RTN : Power and Return for lamp and control circuitry Tolerance: Noise & Ripple: Current Cap: Recommended Cabling: The backlight is a closed loop luminance sensed system. A sensor monitors the bulb's luminance output and compares it with the control voltage to regulate output. The luminance is maintained over time and temperature variations. +12V(2), +12V(2)_RTN : Power and Return for heater Our multi-bulb system offers built-in redundancy for continued lighting in the event of single bulb failure. A built-in lamp heater assembly maintains bulb temperature at its optimum level. External shutdown of the heater and lamp power are controlled via an external input. When lamp replacement is required, an output pin signals low. Tolerance: Noise & Ripple: Current Cap: Recommended Cabling: Control Voltage: Noise & Ripple: Current Cap: Recommended Cabling: Luminance Range: Signal Acronym +12V(2)_RTN Input/ Description Output 1 Input Backlight heater return Input signal used to shutdown the lamp and 2 EXTSHDW Input heater power, the control circuitry will still be powered. Positive side of the differential voltage control 3 +CONTROL Input for the backlight. Negative side of the differential voltage control 4 +CONTROL_RTN Input for the backlight. (Normally Grounded) 5 +12V(2) Input This is the power for the internal backlight heater. 6 Not Used 7 LAMPMNT Output Output signal to indicate the lamps need replacement. 8 Not Used Input Shield of the control voltage cable. 9 +12V(1) Input +12 volt power used for the backlight circuitry. 10 +12V(1)_RTN Input +12 volt return Uniformity: Panelview is a subsidiary of White Electronic Designs Corporation 30% measured at 5 spots Note: All measurements at 25 0C Pin9 * Looking at component side of PCB. Panelview Hillsboro, OR (503) 690-2460 Low: 0.1 fl max. High: 100fl min. Control Voltage: 0.000 to 5.000 Volts (The adjustment range is monotonic with 8 BIT resolution.) Dupont/Berg Part Number 69168-110 Pin2 0 to +5 V < 10mVp-p 1mA #24 AWG Twisted LUMINANCE SIGNAL DEFINITION Pin1 ±5% 150 mVp-p 1.0 Amp max #24 AWG Twisted +CONTROL, -CONTROL_RTN : 0 to 5V Input for luminance control voltage External voltage input is a differential input that provides common mode rejection of common mode noise. The luminance output versus input voltage response is non-linear to provide easy adjustments at low luminance. Pin ± 5% 150mVp-p 1.4 Amps max #24 AWG Twisted Pin10 4 D99-516E2P2B2M1 Panelview Enhancing the Vision VIDEO INTERFACE SPECIFICATIONS SIGNAL PARAMETERS Parameter FEATURES ■ Dual Mode NTSC (M) and PAL F Timing for RGB Video and NTSC Timing for Composite Video ■ Supports Two Sets of Analog RGB Video Signals Horizontal Sync Input CLKC = HI ■ NTSC Composite or S-Video Signals ■ Display Resolution 320 x 234 (NTSC) and 320 x 273 (PAL) ■ External Clock Mode ABSOLUTE MAXIMUM RATINGS Supply Voltage (VSH to GND) Supply Voltage (VSL to GND) Analog Input (VA) Digital Input (VD) Power Consumption (w/panel) Power Dissipation +15V -15V -0.3 to + 2.0V -0.3 to VS to +0.3V +12 @ 0.160 mA (max) -12 @ 0.050 mA (max) 3.0 Watts (max) Vertical Sync Input CLKC = HI SAM=LO SAM=HI Clock Input Input CLKC = LO SAM=HI SAM=LO Horizontal Sync Input CLKC = LO frequency NTSC frequency PAL pulse width NTSC pulse width PAL rise time fall time frequency NTSC frequency PAL pulse width NTSC pulse width PAL rise time fall time frequency fc frequency fc HI width LO width rise time fall time frequency frequency pulse width rise time fall time POWER INPUT SPECIFICATIONS Parameter Symbol Min Typ Max Units Positive Input Voltage VS 10.5 Negative Input Voltage VSL -8.0 12.0 13.0 VDC -12.0 -13.0 Analog Input Voltage VAH 0.7 0.74 VDC 1.0 Vp-p Digital Input Voltage (High) VDH 3.7 -- 5.1 VDC Digital Input Voltage (Low) VDL 0 -- 1.0 VDC Symbol Min fh(N) 15.13 fh(P) 15.03 tv(N) 4.2 tv(P) 4.2 trv1 tfv1 fh(N) fh/284 fh(P) fh/344 tv(N) tv(P) trv1 tfv1 fcli 6.0 fcli 18.2 twh 20.0 twl 20.0 trcl1 tfcl1 fhi fcli/1230 fhi fcli/465 thi 1.0 trhi tfhi frequency pulse width rise time fall time CLK ↑ note 1 CLK ↑ note 2 Vertical Sync Input CLKC = LO VSY Typ Max Units 15.73 16.33 kHz 15.63 16.23 kHz 4.7 5.2 µs 4.7 5.2 µs 0.5 µs 0.5 µs fh/262 fh/258 Hz fh/312 fh/304 Hz 3h µs 2.5h µs 0.5 µs 0.5 µs 6.8 7.6 MHz 18.9 20 MHz ns ns 5.0 ns 5.0 ns 15.73 16.33 MHz MHz 4.7 5.2 µs 0.05 µs 0.05 µs fh/284 fh/262 fh/258 Hz 1h 3h 5h µs 0.5 µs 0.5 µs 25 ns 25 ns 1 µs 1 µs Data set up time Data hold time Data set up time Data hold time NOTES: 1.In the case where CLKC = HI, this shows the phase difference from HSY to CLK. In that case HSY will be taken at the rise timing of CLK 2.In the case where CLKC = HI, this shows the phase difference from VSY to HSY. In that case VSY will be taken at the rise timing of HSY PHYSICAL SPECIFICATIONS 4.250 TIMING WAVEFORM tC tCH 1.750 Ø 0.125 3X tCL Clock Clock 0.750 Horiz. Sync. tHP 3.575 tH Horiz. Sync. Vert. Sync. tVP tV 5 Panelview (503) 690-2460 www.panelview.com Panelview is a subsidiary of White Electronic Designs Corporation D99-516E2P2B2M1 Panelview Enhancing the Vision CONNECTOR TYPE SIGNAL DEFINITION Pin Symbol 1 2 3 4 5 6 7 8 9 10 VB2 GND VR2 VG2 VB1 VSL VR1 VG1 VBS CRM Input/ Output Input Input Input Input Input Input Input Input Input Input 11 CLKC 12 VSH 13 VSW Input Input Input 14 15 GND SAM Input Input 16 VMS Input 17 18 19 20 CLK N/P HSY VSY Input Input I/O I/O The replacement interface for the LQ6FW315 glass uses a 2mm 20 pin Molex right angle connector for the video, power, and clock inputs. This interface supports both NTSC Composite, S Video, and RGB depending on how the video select channels are biased (see chart). Description Video Signal - Blue Ground Video Signal - Red Video Signal - Green Video Signal - Blue Negative Power Supply Voltage (-12V) Video Signal - Red Video Signal - Green NTSC Video/Composite Sync (RS170 timing) Chrominance Signal for Y/C video Chrominance Input when VSW = L and Composite Video when H Clock Selection Positive Power Supply (+12V) Video Input Mode Select (See Chart) High = RGB1; Low = RGB2 Ground Sampling Order for RGB Low = Simultaneous, High = Independent Video Input Mode Select (See Chart) Low = Composite or Y/C Video; High = RGB Video Dot Clock RGB Display Modes (NTSC or PAL) Horizontal Sync. Low TTL Vertical Sync. Low TTL Pin 1 20 pin shrouded right angle Molex connector with 30µ" gold: P/N 87333-2021. Arrow denotes pin 1 (Note picture is not actual connector, for pin reference only). CLOCK SELECT Terminal HSY VSY CLK VIDEO SELECT Video Select RGB-1 RGB-2 NTSC S-video Terminal VSW High Low High Low VSM High High Low Low Panelview Hillsboro, OR (503) 690-2460 Panelview is a subsidiary of White Electronic Designs Corporation Pin 2 6 CLKC=H CLKC=L SAM=H SAM=L SAM=H SAM=L Output Output Input Input Output Output Input Input Output Output Input Input Low Dot Clock Pixel Clock Dot Clock D99-516E2P2B2M1 Panelview Enhancing the Vision OPTICAL SPECIFICATIONS VIEWING ANGLE VIEWING ANGLE With SBLR technology, our wide viewing angle 5.0" ruggedized unit can further improve the viewing area for applications where sunlight readability at extreme angles is critical. The contrast at the following angles shall maintain a ratio of 5:1 in dark ambient conditions. Left/Right: Image Reversal Contrast Ratio Wash Out 55°/ 55° Top/Bottom: +35°/ -55° 12 O Clock 35 5:1 C/R 12 O Clock 0 ¡ ¡ 6 O Clock Iso - CONTRAST Max C/R 6 O Clock 55 5:1 C/R Image Reversal 7 Panelview (503) 690-2460 www.panelview.com Panelview is a subsidiary of White Electronic Designs Corporation D99-516E2P2B2M1 Panelview Enhancing the Vision OPTICAL CHARACTERISTICS AT 25 0C Parameter Response Time Condition Min Typ Max Units Electrically On Electrically Off On White 0 to 30 degrees +/-45 degrees @ 8000 FC Horizontal Vertical 30 50 5.5 1.5 0.15 0.107 0.320 60 100 2 0.2 ms ms % % % mm mm x y x y x y x y x y 0.612 0.343 0.302 0.596 0.156 0.172 0.337 0.397 0.298 0.364 Rise Decay Transmission Specular Reflectance Diffuse Reflectance Dot Pitch Chromaticity Coordinates(1) Red Green Blue White Black NOTE: 1. Chromaticity measured at center of display and normal B display. ENVIRONMENTAL SPECIFICATIONS: Operating Temperature: -40 0C to +850C Storage Temperature: -40 0C to +850C Altitude: 60,000 feet Shock: 20G, 11ms Vibration (endurance): 0.04 g 2/Hz, 15Hz to 2000Hz, 8.91grms. (operation): 0.008 g 2/Hz, 15-30Hz, -8db/oct, 30-35Hz 0.005 g2/Hz, 35-2000Hz, 3.16grms. Humidity: 95% RH at 65 0C per Mil-STD-81OE, Method 507.3 Procedure III Aggravated Panelview Hillsboro, OR (503) 690-2460 Panelview is a subsidiary of White Electronic Designs Corporation 8