LMV721,, LMV722 10-MHz LOW-NOISE LOW-VOLTAGE LOW-POWER OPERATIONAL AMPLIFIERS www.ti.com SLOS470A – JUNE 2005 – REVISED AUGUST 2006 FEATURES • • • • • • LMV7210DBV or DCK PACKAGE (TOP VIEW) Power-Supply Voltage Range: 2.2 V to 5 V Low Supply Current: 930 µA/Amplifier at 2.2 V High Unity-Gain Bandwidth: 10 MHz Rail-to-Rail Output Swing – 600-Ω Load: 120 mV From Either Rail at 2.2 V – 2-kΩ Load: 50 mV From Either Rail at 2.2 V Input Common-Mode Voltage Range Includes Ground Input Voltage Noise: 9 nV/√Hz at f = 1 kHz OUT VCC− IN+ 5 VCC+ 4 IN− 2 3 LMV7220D, DGK, OR DRG PACKAGE (TOP VIEW) 1OUT 1IN− 1IN+ VCC− APPLICATIONS • • • • 1 Cellular and Cordless Phones Active Filter and Buffers Laptops and PDAs Battery Powered Electronics 1 8 2 7 3 6 4 5 VCC+ 2OUT 2IN− 2IN+ DESCRIPTION/ORDERING INFORMATION The LMV721 (single) and LMV722 (dual) are low-noise low-voltage low-power operational amplifiers that can be designed into a wide range of applications. The LMV721 and LMV722 have a unity-gain bandwidth of 10 MHz, a slew rate of 5 V/µs, and a quiescent current of 930 µA/amplifier at 2.2 V. The LMV721 and LMV722 are designed to provide optimal performance in low-voltage and low-noise systems. They provide rail-to-rail output swing into heavy loads. The input common-mode voltage range includes ground, and the maximum input offset voltage are 3.5 mV (over recommended temperature range) for the devices. Their capacitive load capability is also good at low supply voltages. The operating range is from 2.2 V to 5.5 V. ORDERING INFORMATION PACKAGE (1) TA Single LMV721IDCKR Reel of 250 LMV721IDCKT Reel of 3000 LMV721IDBVR Reel of 2500 LMV722IDR Tube of 75 LMV722ID VSSOP – DGK Reel of 2500 LMV722IDGKR R6_ QFN – DRG Reel of 2500 LMV722IDRGR ZYY SOIC – D Dual (1) (2) TOP-SIDE MARKING (2) Reel of 3000 SC-70 – DCK SOT-23 – DBV –40°C to 85°C ORDERABLE PART NUMBER RK_ RBF_ MV722I Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. DBV/DCK/DGK: The actual top-side marking has one additional character that designates the assembly/test site. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2005–2006, Texas Instruments Incorporated LMV721,, LMV722 10-MHz LOW-NOISE LOW-VOLTAGE LOW-POWER OPERATIONAL AMPLIFIERS www.ti.com SLOS470A – JUNE 2005 – REVISED AUGUST 2006 Typical Application R5 VCC C1 R3 Electret Microphone R4 Input VCC R1 − + Output C2 R2 Absolute Maximum Ratings (1) over operating free-air temperature range (unless otherwise noted) MIN VCC+ – VCC– Supply voltage (2) VID Differential input voltage (3) Package thermal impedance (4) TJ Operating virtual-junction temperature Tstg Storage temperature range (1) (2) (3) (4) (5) (6) V ±Supply voltage V 97 DBV package (5) 206 DCK package (5) 252 package (5) 172 DRG package (6) 50.7 DGK UNIT 5.5 package (5) D θJA MAX –65 °C/W 150 °C 150 °C Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. All voltage values (except differential voltages and VCC specified for the measurement of IOS) are with respect to the network GND. Differential voltages are at IN+ with respect to IN–. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability. The package thermal impedance is calculated in accordance with JESD 51-7. The package thermal impedance is calculated in accordance with JESD 51-5. Recommended Operating Conditions MIN MAX UNIT VCC+ – VCC– Supply voltage 2.2 5 V TJ Operating virtual-junction temperature –40 85 °C ESD Protection Human-Body Model Machine Model 2 Submit Documentation Feedback TYP UNIT 2000 V 100 V LMV721,, LMV722 10-MHz LOW-NOISE LOW-VOLTAGE LOW-POWER OPERATIONAL AMPLIFIERS www.ti.com SLOS470A – JUNE 2005 – REVISED AUGUST 2006 Electrical Characteristics VCC+ = 2.2 V, VCC– = GND, VICR = VCC+/2, VO = VCC+/2, and RL > 1 MΩ (unless otherwise noted) PARAMETER TEST CONDITIONS TJ MIN 25°C TYP MAX 0.02 3 UNIT VIO Input offset voltage TCVIO Input offset voltage average drift 25°C 0.6 µV/°C IIB Input bias current 25°C 260 nA IIO Input offset current 25°C 25 nA CMMR Common-mode rejection ratio VICR = 0 V to 1.3 V PSRR Power-supply rejection ratio VCC+ = 2.2 V to 5 V, VO = 0, VICR = 0 VICR Input common-mode voltage AVD Large-signal voltage gain –40°C to 85°C 25°C 70 –40°C to 85°C 64 25°C 80 –40°C to 85°C 70 CMRR ≥ 50 dB RL = 600 Ω, VO = 0.75 V to 2 V RL = 2 kΩ, VO = 0.5 V to 2.1 V RL = 600 Ω to VCC+/2 3.5 90 RL = 2 kΩ to VCC+/2 25°C 75 –40°C to 85°C 70 25°C 75 –40°C to 85°C 70 25°C 2.090 –40°C to 85°C 2.065 Output current Sinking, VO = 2.2 V, VIN(diff) = ±0.5 V 2.125 LMV721 ICC Supply current 2.150 –40°C to 85°C 2.125 2.177 0.056 LMV722 V 0.080 0.105 25°C 10 –40°C to 85°C 5 25°C 10 –40°C to 85°C 5 14.9 mA 17.6 0.93 –40°C to 85°C 25°C 0.120 0.145 25°C 25°C dB 84 –40°C to 85°C IO V 81 0.071 25°C Sourcing, VO = 0 V, VIN(diff) = ±0.5 V dB 0.3 –40°C to 85°C Output swing dB –0.3 25°C 25°C VO 88 mV 1.3 1.5 1.81 –40°C to 85°C 2.4 mA 2.6 SR Slew rate (1) 25°C GBW Gain bandwidth product Φm Phase margin Gm Gain margin Vn Input-referred voltage noise f = 1 kHz 25°C 9 nV/√Hz In Input-referred current noise f = 1 kHz 25°C 0.3 pA/√Hz Total harmonic distortion f = 1 kHz, AV = 1, RL = 600 Ω, VO = 500 mVpp 25°C 0.004 THD (1) 4.9 V/µs 25°C 10 MHz 25°C 67.4 ° 25°C –9.8 dB % Connected as voltage follower with 1-V step input. Number specified is the slower of the positive and negative slew rate. Submit Documentation Feedback 3 LMV721,, LMV722 10-MHz LOW-NOISE LOW-VOLTAGE LOW-POWER OPERATIONAL AMPLIFIERS www.ti.com SLOS470A – JUNE 2005 – REVISED AUGUST 2006 Electrical Characteristics VCC+ = 5 V, VCC– = GND, VICR = VCC+/2, VO = VCC+/2, and RL > 1 MΩ (unless otherwise noted) PARAMETER TEST CONDITIONS TJ MIN 25°C TYP MAX –0.08 3 VIO Input offset voltage TCVIO Input offset voltage average drift 25°C 0.6 µV/°C IIB Input bias current 25°C 260 nA IIO Input offset current 25°C 25 nA CMMR Common-mode rejection ratio VICR = 0 V to 1.3 V PSRR Power-supply rejection ratio VCC+ = 2.2 V to 5 V, VO = 0, VICR = 0 VICR Input common-mode voltage AVD Large-signal voltage gain –40°C to 85°C RL = 600 Ω, VO = 0.75 V to 4.8 V RL = 2 kΩ, VO = 0.7 V to 4.9V 3.5 25°C 80 –40°C to 85°C 75 25°C 70 –40°C to 85°C 64 CMRR ≥ 50 dB RL = 600 Ω to VCC+/2 VO 89 90 80 RL = 2 kΩ to VCC+/2 –40°C to 85°C 70 25°C 80 –40°C to 85°C 70 25°C 4.84 –40°C to 85°C 4.815 4.882 Output current Sinking, VO = 2.2 V, VIN(diff) = ±0.5 V 4.93 –40°C to 85°C 4.905 4.952 0.076 LMV721 ICC Supply current LMV722 20 –40°C to 85°C 12 25°C 15 –40°C to 85°C 8.5 0.11 52.6 mA 23.7 1.03 –40°C to 85°C 25°C V 0.135 25°C 25°C 0.19 0.215 25°C –40°C to 85°C IO dB 94 0.134 25°C Sourcing, VO = 0 V, VIN(diff) = ±0.5 V V 87 –40°C to 85°C Output swing dB 4.1 25°C mV dB –0.3 25°C 25°C 1.4 1.7 2.01 –40°C to 85°C 2.4 mA 2.8 SR Slew rate (1) 25°C 5.25 V/µs GBW Gain bandwidth product 25°C 10 MHz Φm Phase margin 25°C 72 ° Gm Gain margin 25°C –11 dB Vn Input-referred voltage noise f = 1 kHz 25°C 8.5 nV/√Hz In Input-referred current noise f = 1 kHz 25°C 0.2 pA/√Hz Total harmonic distortion f = 1 kHz, AV = 1, RL = 600 Ω, VO = 500 mVpp 25°C 0.001 THD (1) 4 UNIT Connected as voltage follower with 1-V step input. Number specified is the slower of the positive and negative slew rate. Submit Documentation Feedback % LMV721,, LMV722 10-MHz LOW-NOISE LOW-VOLTAGE LOW-POWER OPERATIONAL AMPLIFIERS www.ti.com SLOS470A – JUNE 2005 – REVISED AUGUST 2006 TYPICAL CHARACTERISTICS SUPPLY CURRENT vs SUPPLY VOLTAGE SOURCING CURRENT vs OUTPUT VOLTAGE 100 1.4 VCC = 2.2 V TA = 125°C TA = 85°C Isource – Sourcing Current – mA 1.3 ICC – Supply Current – mA 1.2 1.1 1 0.9 TA = 25°C 0.8 TA = –40°C 0.7 0.6 10 1 0.5 0.1 0.001 0.4 2 2.5 3 3.5 4 4.5 5 5.5 6 0.01 1 10 Output Voltage Referenced to VCC – V VCC – Supply Voltage – V SOURCING CURRENT vs OUTPUT VOLTAGE SINKING CURRENT vs OUTPUT VOLTAGE 100 100 VCC = 5 V VCC = 2.2 V Isink – Sinking Current – mA Isource – Sourcing Current – mA 0.1 10 1 0.1 0.001 0.01 0.1 1 10 10 1 0.1 0.001 Output Voltage Referenced to VCC – V Submit Documentation Feedback 0.01 0.1 1 10 Output Voltage Referenced to VCC – V 5 LMV721,, LMV722 10-MHz LOW-NOISE LOW-VOLTAGE LOW-POWER OPERATIONAL AMPLIFIERS www.ti.com SLOS470A – JUNE 2005 – REVISED AUGUST 2006 TYPICAL CHARACTERISTICS (continued) SINKING CURRENT vs OUTPUT VOLTAGE OUTPUT VOLTAGE SWING vs SUPPLY VOLTAGE 100 0.3 VIO – Input Offset Voltage – mV Isink – Sinking Current – mA VCC = 5 V 10 1 0.1 0.001 0.2 0.1 0 -0.1 -0.2 -0.3 0.01 0.1 1 10 2 2.5 3 Output Voltage Referenced to VCC – V 4.5 5 INPUT OFFSET VOLTAGE vs INPUT COMMON-MODE VOLTAGE 0.3 0.3 VCC = 2.2 V VCC = 5 V 0.2 VIO – Input Offset Voltage – mV VIO – Input Offset Voltage – mV 4 VCC – Supply Voltage – V INPUT OFFSET VOLTAGE vs INPUT COMMON-MODE VOLTAGE 0.1 0 -0.1 -0.2 -0.3 0.2 0.1 0 -0.1 -0.2 -0.3 0 0.3 0.6 0.9 1.2 1.5 0 VICR – Input Common-Mode Voltage – V 6 3.5 Submit Documentation Feedback 0.5 1 1.5 2 2.5 3 3.5 VICR – Input Common-Mode Voltage – V 4 LMV721,, LMV722 10-MHz LOW-NOISE LOW-VOLTAGE LOW-POWER OPERATIONAL AMPLIFIERS www.ti.com SLOS470A – JUNE 2005 – REVISED AUGUST 2006 TYPICAL CHARACTERISTICS (continued) INPUT VOLTAGE vs OUTPUT VOLTAGE INPUT VOLTAGE vs OUTPUT VOLTAGE 0.3 0.3 VCC = 5 V VCC = 2.2 V Input Differential Voltage – mV Input Differential Voltage – mV 0.2 0.1 0 -0.1 -0.2 0.2 0.1 0 -0.1 -0.2 -0.3 -0.3 0 0.5 1 1.5 2 0 2.5 INPUT VOLTAGE NOISE vs FREQUENCY 1.5 2 2.5 3 3.5 4 4.5 5 INPUT CURRENT NOISE vs FREQUENCY 100 Input Current Noise – pA/ √Hz Hz 100 Input Voltage Noise – µV/ √Hz Hz 1 Output Voltage – V Output Voltage – V 10 1 10 1.E+01 0.5 100 1.E+02 1.E+03 1k 1.E+04 10k 1.E+05 100k 10 1 0.1 10 1.E+01 f – Frequency – Hz 100 1.E+02 1k 1.E+03 10k 1.E+04 f – Frequency – Hz Submit Documentation Feedback 7 LMV721,, LMV722 10-MHz LOW-NOISE LOW-VOLTAGE LOW-POWER OPERATIONAL AMPLIFIERS www.ti.com SLOS470A – JUNE 2005 – REVISED AUGUST 2006 TYPICAL CHARACTERISTICS (continued) PSRR vs FREQUENCY PSRR vs FREQUENCY 120 120 VCC = 5 V 100 100 80 80 PSRR – dB 60 60 40 40 20 20 0 1.E+02 100 1.E+03 1k 1.E+04 10k 1.E+05 100k 1.E+06 1M 0 1.E+02 100 1.E+07 10M 1.E+03 1k 1.E+04 10k 1.E+05 100k f – Frequency – Hz f – Frequency – Hz GAIN AND PHASE vs FREQUENCY GAIN AND PHASE vs FREQUENCY 80 80 130 VCC = 5 V 115 70 100 60 50 85 50 40 70 30 55 20 40 10 115 Phase 100 85 Gain 40 70 30 55 20 40 25 10 25 0 10 0 10 -10 -5 -10 -5 Gain – dB Gain – dB 8 Gain Phase – deg Phase 60 1.E+07 10M 130 VCC = 2.2 V 70 1.E+06 1M -20 -20 10k 100k 1.E+06 10M 100M 1k 1M 1.E+03 1.E+04 1.E+05 1.E+07 1.E+08 -20 -20 10k 100k 10M 100M 1k 1M 1.E+03 1.E+04 1.E+05 1.E+06 1.E+07 1.E+08 f – Frequency – Hz f – Frequency – Hz Submit Documentation Feedback Phase – deg PSRR – dB VCC = 2.2 V LMV721,, LMV722 10-MHz LOW-NOISE LOW-VOLTAGE LOW-POWER OPERATIONAL AMPLIFIERS www.ti.com SLOS470A – JUNE 2005 – REVISED AUGUST 2006 TYPICAL CHARACTERISTICS (continued) SLEW RATE vs SUPPLY VOLTAGE THD vs FREQUENCY 6 1 VCC = 2.2 V 5.8 5.6 5.2 THD – % SR – Slew Rate – V/µs 0.1 5.4 5 Rising 0.01 4.8 4.6 0.001 4.4 Falling 4.2 4 2 2.5 3 3.5 4 4.5 5 0.0001 100 10000 10k 100000 100k f – Frequency – Hz VCC – Supply Voltage – V PULSE RESPONSE PULSE RESPONSE VCCR=L 5= V, RL = C 2 Lk=Ω21.2 , CL =nF, 21.2 RO © = 2.1 Ω 2 k©, ROnF, = 2.1 nF, RnF, 0O©= 0 Ω VCC =R5 V,2Rk©, kLΩ=, 21.2 CL = 21.2 L= O =R L = 2C 0.25 V per Division 0.25 V per Division 1000 1k 2 µs per Division 2 µs per Division Submit Documentation Feedback 9 LMV721,, LMV722 10-MHz LOW-NOISE LOW-VOLTAGE LOW-POWER OPERATIONAL AMPLIFIERS www.ti.com SLOS470A – JUNE 2005 – REVISED AUGUST 2006 TYPICAL CHARACTERISTICS (continued) PULSE RESPONSE PULSE RESPONSE 10Rk©, C = 21.2 nF, R = 0 © VCCR=L 5= V, L = 10 LkΩ, CL = 21.2OnF, RO = 0 Ω 0.25 V per Division 0.25 V per Division = V, 2 k©, ROnF, = 9.5 VCCR=L 5 RL = C 2Lk=Ω21.2 , CL =nF, 21.2 RO © = 9.5 Ω 2 µs per Division 2 µs per Division PULSE RESPONSE PULSE RESPONSE 2R ©, C2L = ROnF, = 0R© VCC = R 2.2 Ω2.12 , CL =nF, 2.12 L =V, L = O = 0 Ω 0.25 V per Division 250 mV per Division = V, 600 CL =Ω21.2 ROnF, = 0R©O = 0 Ω VCCR=L 5 RL©, = 600 , CL =nF, 21.2 2 µs per Division 10 1 µs per Division Submit Documentation Feedback LMV721,, LMV722 10-MHz LOW-NOISE LOW-VOLTAGE LOW-POWER OPERATIONAL AMPLIFIERS www.ti.com SLOS470A – JUNE 2005 – REVISED AUGUST 2006 TYPICAL CHARACTERISTICS (continued) PULSE RESPONSE PULSE RESPONSE 10Rk©, C k= ROnF, = 0R© VCC = R2.2 Ω,2.12 CL =nF, 2.12 L =V, L = 10 L O = 0 Ω 250 mV per Division 250 mV per Division RL =V,2Rk©, CLΩ=, 2.12 nF, RnF, 0O©= 0 Ω VCC = 2.2 CL = 2.12 O =R L = 2 k 1 µs per Division 1 µs per Division PULSE RESPONSE PULSE RESPONSE VCC = R 2.2 = 10Ck CL =nF, 2.12ROnF, RO = © 11.5 Ω 10RLk©, = ,2.12 = 11.5 L =V, LΩ 250 mV per Division 250 mV per Division RL V, = 10 k©, 2.12 nF, R VCC = 2.2 RL = 10 C kΩ ,C nF, 2.2 Ω L= O =R2.2 L = 2.12 O =© 1 µs per Division 1 µs per Division Submit Documentation Feedback 11 LMV721,, LMV722 10-MHz LOW-NOISE LOW-VOLTAGE LOW-POWER OPERATIONAL AMPLIFIERS SLOS470A – JUNE 2005 – REVISED AUGUST 2006 TYPICAL CHARACTERISTICS (continued) PULSE RESPONSE 250 mV per Division 600 CL = ROnF, = 0R© VCC = R 2.2 RL ©, = 600 Ω1.89 , CL =nF, 1.89 L =V, O = 0 Ω 1 µs per Division 12 Submit Documentation Feedback www.ti.com PACKAGE OPTION ADDENDUM www.ti.com 12-Oct-2007 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty LMV721IDBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LMV721IDBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LMV721IDCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LMV721IDCKRG4 ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LMV721IDCKT ACTIVE SC70 DCK 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LMV721IDCKTG4 ACTIVE SC70 DCK 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LMV722ID ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LMV722IDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LMV722IDGKR ACTIVE MSOP DGK 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LMV722IDGKRG4 ACTIVE MSOP DGK 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LMV722IDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LMV722IDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Lead/Ball Finish MSL Peak Temp (3) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. Addendum-Page 1 PACKAGE OPTION ADDENDUM www.ti.com 12-Oct-2007 In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 12-Jan-2008 TAPE AND REEL BOX INFORMATION Device Package Pins Site Reel Diameter (mm) Reel Width (mm) A0 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant LMV721IDBVR DBV 5 SITE 35 180 9 3.23 3.17 1.37 4 8 Q3 LMV721IDBVR DBV 5 SITE 45 0 0 3.23 3.17 1.37 4 8 Q3 LMV721IDCKR DCK 5 SITE 35 180 9 2.24 2.34 1.22 4 8 Q3 LMV721IDCKR DCK 5 SITE 45 0 0 2.4 2.5 1.2 4 8 Q3 LMV721IDCKT DCK 5 SITE 35 180 9 2.24 2.34 1.22 4 8 Q3 LMV721IDCKT DCK 5 SITE 45 0 0 2.4 2.5 1.2 4 8 Q3 LMV722IDGKR DGK 8 SITE 47 330 12 5.3 3.3 1.3 8 12 Q1 LMV722IDR D 8 SITE 27 330 12 6.4 5.2 2.1 8 12 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 12-Jan-2008 Device Package Pins Site Length (mm) Width (mm) LMV721IDBVR DBV 5 SITE 35 202.0 201.0 28.0 LMV721IDBVR DBV 5 SITE 45 0.0 185.0 220.0 LMV721IDCKR DCK 5 SITE 35 202.0 201.0 28.0 LMV721IDCKR DCK 5 SITE 45 0.0 185.0 220.0 LMV721IDCKT DCK 5 SITE 35 202.0 201.0 28.0 LMV721IDCKT DCK 5 SITE 45 0.0 185.0 220.0 LMV722IDGKR DGK 8 SITE 47 370.0 355.0 55.0 LMV722IDR D 8 SITE 27 342.9 338.1 20.64 Pack Materials-Page 2 Height (mm) IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Amplifiers Data Converters DSP Clocks and Timers Interface Logic Power Mgmt Microcontrollers RFID RF/IF and ZigBee® Solutions amplifier.ti.com dataconverter.ti.com dsp.ti.com www.ti.com/clocks interface.ti.com logic.ti.com power.ti.com microcontroller.ti.com www.ti-rfid.com www.ti.com/lprf Applications Audio Automotive Broadband Digital Control Medical Military Optical Networking Security Telephony Video & Imaging Wireless www.ti.com/audio www.ti.com/automotive www.ti.com/broadband www.ti.com/digitalcontrol www.ti.com/medical www.ti.com/military www.ti.com/opticalnetwork www.ti.com/security www.ti.com/telephony www.ti.com/video www.ti.com/wireless Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright 2008, Texas Instruments Incorporated