Bulkhead Feed-Thrus 231-103-H7 Jam Nut Mount Hermetic Bulkhead Feed-Thru MIL-DTL-38999 Series I Type Connector Series 231 - D38999 Series I Type Shell Style H7 - Jam Nut Mount Shell Size 09 11 13 15 17 19 21 23 25 2.040 (51.8) Insert Arrangement Per MIL-DTL-38999 Series I MIL-STD-1560 1.310 (33.3) Alternate Key Position A, B, C, D (N = Normal) B 231 - 103 - H7 Z1 11 - 35 P N - 01 A Thread Contact Termination P - Pin on Jam Nut Side S - Socket on Jam Nut Side Connector Type 103 - Hermetic Bulkhead Feed-Thru .585 (14.9) Ref Connector Material and Finish FT - Carbon Steel, Fused Tin Z1 - CRES, Passivated ZL - CRES, Nickel Finish Hole For .032 Dia Safety Wire, 3 Equally Spaced .125 (3.2) .150 (3.8) Max Panel Accomodation Panel Accomodation 01 - .0625″ (Min) .125″ (Max) 02 - .0625″ (Min) .250″ (Max) 03 - .0625″ (Min) .500″ (Max) E Dia F C Recommended Panel Cut-Out TABLE I: CONNECTOR DIMENSIONS E SHELL SIZE 09 A THREAD CLASS 2A .688-24 UNEF B DIA MAX .573(14.6) C HEX .875(22.2) D FLATS 1.062(27.0) E DIA ±.005(0.1) .703(17.9) F +.000-.005 (0-0.1) .669(17.0) 11 0.812-20 UNEF .701(17.8) 1.000(25.4) 1.250(31.8) .827(21.0) .769(19.5) 13 1.000-20 UNEF .851(21.6) 1.188(30.2) 1.375(34.9) 1.015(25.8) .955(24.3) 15 1.125-18 UNEF .976(24.8) 1.312(33.3) 1.500(38.1) 1.140(29.0) 1.084(27.5) 17 1.250-18 UNEF 1.101(28.0) 1.438(36.5) 1.625(41.3) 1.265(32.1) 1.208(30.7) 19 1.375-18 UNEF 1.208(30.7) 1.562(39.7) 1.812(46.0) 1.390(35.3) 1.333(33.9) 21 1.500-18 UNEF 1.333(33.9) 1.688(42.9) 1.938(49.2) 1.515(38.5) 1.459(37.1) 23 1.625-18 UNEF 1.458(37.0) 1.812(46.0) 2.062(52.4) 1.640(41.7) 1.580(40.1) 25 1.750-18 UNS 1.583(40.2) 2.000(50.8) 2.188(55.6) 1.765(44.8) 1.709(43.4) D Insert Arrangement per MIL-DTL-38999, Series l MIL-STD-1560 APPLICATION NOTES 1. Power to a given contact on one end will result in power to contact directly opposite, regardless of identification letter. 2. Hermeticity = less than 1 x 10-4 cc/sec at one atmosphere. Not for use in liquid atmosphere. 3. Material/finish: Shell, nut – CRES/passivated, carbon steel/fused tin or CRES/nickel per QQ-N-290. © 2008 Glenair, Inc. Contacts – Gold Plated. Pin: alloy 52; Skt.: copper alloy Insulator – fused vitreous glass/N.A. Seals – fluorosilicone rubber/N.A. 4. CAGE CODE 06324 Metric dimensions (mm) are indicated in parentheses. Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-2 E-Mail: [email protected]