M54HC132 M74HC132 QUAD 2-INPUT SCHMITT NAND GATE . . . . . . . . HIGH SPEED tPD = 11 ns (TYP.) AT VCC = 5 V LOW POWER DISSIPATION ICC = 1µA (MAX.) AT TA = 25 °C OUTPUT DRIVE CAPABILITY 10 LSTTL LOADS HIGH NOISE IMMUNITY VH (TYP.) = 0.9 V AT VCC = 5 V SYMMETRICAL OUTPUT IMPEDANCE IOH = IOL = 4 mA (MIN.) BALANCED PROPAGATION DELAYS tPLH = tPHL WIDE OPERATING VOLTAGE RANGE VCC (OPR) = 2 V TO 6 V PIN AND FUNCTION COMPATIBLE WITH 54/74LS132 B1R (Plastic Package) F1R (Ceramic Package) M1R (Micro Package) C1R (Chip Carrier) ORDER CODES : M54HC132F1R M74HC132M1R M74HC132B1R M74HC132C1R DESCRIPTION The M54/74HC132 is a high speed CMOS QUAD 2INPUT SCHMITT NAND GATE fabricated in silicon gate C2MOS technology. It has the same high speed performance of LSTTL combined with true CMOS low power consumption. Pin configuration and function are identical to those of the M54/74HC00. PIN CONNECTIONS (top view) The hysterisis characteristics (around 20 % VCC) of all inputs allow slowly changing input signals to be transformed into sharply defined jitter-free output signals. All inputs are equipped with protection circuits against static discharge and transient excess voltage. INPUT AND OUTPUT EQUIVALENT CIRCUIT NC = No Internal Connection December 1992 1/9 M54/M74HC132 TRUTH TABLE IEC LOGIC SYMBOL A B Y L L L H H H H L H H H L PIN DESCRIPTION PIN No 1, 4, 9, 12 SYMBOL 1A to 4A NAME AND FUNCTION Data Inputs 2, 5, 10, 13 1B to 4B Data Inputs 3, 6, 8, 11 7 1Y to 4Y GND Data Outputs Ground (0V) 14 VCC Positive Supply Voltage BLOCK DIAGRAM LOGIC DIAGRAM/WAVEFORM ABSOLUTE MAXIMUM RATINGS Symbol Parameter Value Unit VCC VI Supply Voltage DC Input Voltage -0.5 to +7 -0.5 to VCC + 0.5 V V VO DC Output Voltage -0.5 to VCC + 0.5 V IIK IOK DC Input Diode Current DC Output Diode Current ± 20 ± 20 mA mA IO DC Output Source Sink Current Per Output Pin ± 25 mA ICC or IGND DC VCC or Ground Current PD Power Dissipation Tstg TL Storage Temperature Lead Temperature (10 sec) ± 50 mA 500 (*) mW -65 to +150 300 o o C C Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these condition isnotimplied. (*) 500 mW: ≅ 65 oC derate to 300 mW by 10mW/oC: 65 oC to 85 oC 2/9 M54/M74HC132 RECOMMENDED OPERATING CONDITIONS Symbol Parameter Value Unit V V VCC VI Supply Voltage Input Voltage 2 to 6 0 to VCC VO Output Voltage 0 to VCC Top tr, tf Operating Temperature: M54HC Series M74HC Series Input Rise and Fall Time V o -55 to +125 -40 to +85 No Limits o C C DC SPECIFICATIONS Test Conditions Symbol VP VN VH V OH Parameter II ICC TA = 25 C 54HC and 74HC VCC (V) -40 to 85 oC -55 to 125 oC 74HC 54HC High Level Threshold Voltage 2.0 Min. 1.0 Typ. 1.25 Max. 1.5 Min. 1.0 Max. 1.5 Min. 1.0 Max. 1.5 4.5 2.3 2.7 3.15 2.3 3.15 2.3 3.15 Low Level Threshold Voltage 6.0 2.0 3.0 0.3 3.5 0.65 4.2 0.9 3.0 0.3 4.2 0.9 3.0 0.3 4.2 0.9 4.5 1.13 1.6 2.0 1.13 2.0 1.13 2.0 6.0 2.0 1.5 0.3 2.3 0.6 2.6 1.0 1.5 0.3 2.6 1.0 1.5 0.3 2.6 1.0 4.5 0.6 1.1 1.4 0.6 1.4 0.6 1.4 6.0 0.8 1.2 1.4 0.8 1.7 0.8 1.7 Hysteresis Voltage High Level Output Voltage 2.0 4.5 6.0 4.5 VOL Value o Low Level Output Voltage Input Leakage Current Quiescent Supply Current 6.0 2.0 VI = IO=-20 µA VIH or V IL IO=-4.0 mA 1.9 2.0 1.9 1.9 4.4 5.9 4.5 6.0 4.4 5.9 4.4 5.9 4.18 4.31 4.13 4.10 IO=-5.2 mA 5.68 5.8 0.0 5.63 0.1 0.1 0.1 Unit V V V V 5.60 0.0 0.1 0.1 0.1 6.0 4.5 VI = IO= 20 µA VIH or V IL IO= 4.0 mA 0.0 0.17 0.1 0.26 0.1 0.33 0.1 0.40 6.0 IO= 5.2 mA 0.18 0.26 0.33 0.40 VI = VCC or GND ±0.1 ±1 ±1 µA VI = VCC or GND 1 10 20 µA 4.5 6.0 6.0 V 3/9 M54/M74HC132 AC ELECTRICAL CHARACTERISTICS (C L = 50 pF, Input t r = tf = 6 ns) Test Conditions Symbol Parameter tTLH tTHL Output Transition Time tPLH tPHL Propagation Delay Time Value o VCC (V) TA = 25 C 54HC and 74HC Min. Typ. Max. -40 to 85 oC -55 to 125 oC 74HC 54HC Min. Max. Min. Max. 2.0 30 75 95 110 4.5 6.0 8 7 15 13 19 16 22 19 2.0 52 105 130 160 4.5 13 21 26 32 6.0 11 18 22 27 10 10 10 CIN Input Capacitance 5 CPD (*) Power Dissipation Capacitance 29 Unit ns ns pF pF (*) CPD is defined as the value of the IC’s internal equivalent capacitance which is calculated from the operating current consumption without load. (Refer to Test Circuit). Average operting current can be obtained by the following equation. ICC(opr) = CPD •VCC •fIN + ICC/4 (per Gate) SWITCHING CHARACTERISTICS TEST CIRCUIT TEST CIRCUIT ICC (Opr.) 4/9 M54/M74HC132 Plastic DIP14 MECHANICAL DATA mm DIM. MIN. a1 0.51 B 1.39 TYP. inch MAX. MIN. TYP. MAX. 0.020 1.65 0.055 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 15.24 0.600 F 7.1 0.280 I 5.1 0.201 L Z 3.3 1.27 0.130 2.54 0.050 0.100 P001A 5/9 M54/M74HC132 Ceramic DIP14/1 MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 20 0.787 B 7.0 0.276 D E 3.3 0.130 0.38 e3 0.015 15.24 0.600 F 2.29 2.79 0.090 0.110 G 0.4 0.55 0.016 0.022 H 1.17 1.52 0.046 0.060 L 0.22 0.31 0.009 0.012 M 1.52 2.54 0.060 0.100 N P Q 10.3 7.8 8.05 5.08 0.406 0.307 0.317 0.200 P053C 6/9 M54/M74HC132 SO14 MECHANICAL DATA mm DIM. MIN. TYP. A a1 inch MAX. MIN. TYP. 1.75 0.1 0.068 0.2 a2 MAX. 0.003 0.007 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45° (typ.) D 8.55 E 5.8 8.75 0.336 6.2 0.228 0.344 0.244 e 1.27 0.050 e3 7.62 0.300 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M S 0.68 0.026 8° (max.) P013G 7/9 M54/M74HC132 PLCC20 MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 9.78 10.03 0.385 0.395 B 8.89 9.04 0.350 0.356 D 4.2 4.57 0.165 0.180 d1 2.54 0.100 d2 0.56 0.022 E 7.37 8.38 0.290 0.330 e 1.27 0.050 e3 5.08 0.200 F 0.38 0.015 G 0.101 0.004 M 1.27 0.050 M1 1.14 0.045 P027A 8/9 M54/M74HC132 Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use ascritical components in life support devices or systems without express written approval of SGS-THOMSON Microelectonics. 1994 SGS-THOMSON Microelectronics - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A 9/9