MCC 122 ITRMS = 2x300 A = 2x128 A ITAVM VRRM, DRM = 800-1800 V Thyristor Module Preliminary data VRRM VDSM VDRM V V 900 1300 1500 1700 1900 800 1200 1400 1600 1800 Symbol ITRMS ITAVM ITSM 2 I dt (di/dt)cr 3 Type 6 7 1 5 4 2 3 2 1 MCC MCC MCC MCC MCC 6 7 5 4 122-08io1 122-12io1 122-14io1 122-16io1 122-18io1 Conditions Maximum Ratings TC = 85°C; 180° sine 300 128 A A TVJ = 45°C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 3600 3850 A A TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 3200 3420 A A 2 TVJ = 45°C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 64800 62300 As A2s TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 51200 49100 A2s A2s 150 A/µs TVJ = TVJM repetitive, IT = 500 A f = 50Hz, tP = 200µs VD = 2/3 VDRM IG = 0.5 A non repetitive, IT = 500 A diG/dt = 0.5 A/µs A/µs 1000 V/µs 120 60 W W PGAV 8 W VRGM 10 V TVJ TVJM Tstg -40...+125 125 -40...+125 °C °C °C 3000 3600 V~ V~ TVJ = TVJM; VDR = 2/3 VDRM RGK = ¥; method 1 (linear voltage rise) PGM TVJ = TVJM IT = ITAVM tP = 30 µs tP = 500 µs VISOL 50/60 Hz, RMS IISOL £ 1 mA Md Mounting torque (M6) Terminal connection torque (M6) Weight Typical including screws t = 1 min t=1s Applications • Motor control • Power converter • Heat and temperature control for industrial furnaces and chemical processes • Lighting control • Contactless switches • Space and weight savings • Simple mounting • Improved temperature and power cycling • Reduced protection circuits Dimensions in mm (1 mm = 0.0394") 2.25-2.75/20-25 Nm/lb.in. 4.5-5.5/40-48 Nm/lb.in. Data according to IEC 60747 and refer to a single thyristor/diode unless otherwise stated. © 2000 IXYS All rights reserved • International standard package • Direct copper bonded Al2O3-ceramic base plate • Planar passivated chips • Isolation voltage 3600 V~ • UL registered, E 72873 • Keyed gate/cathode twin pins Advantages 500 (dv/dt)cr Features 125 g 948 VRSM 1-2 MCC 122 Symbol Conditions Characteristic Values IRRM, IDRM TVJ = TVJM; VR = VRRM; VD = VDRM VT, VF 10 mA IT, IF = 120 A; TVJ = 25°C 1.13 V VT0 rT TVJ = 125°C; For power-loss calculations only TVJ = TVJM 0.85 2 V mW VGT VD = 6 V; TVJ = 25°C TVJ = -40°C 1.4 1.6 V V IGT VD = 6 V; TVJ = 25°C TVJ = -40°C 150 200 mA mA VGD IGD TVJ = TVJM; VD = 2/3 VDRM 0.2 10 V mA IL TVJ = 25°C; tP = 10 µs, VD = 6 V IG = 0.45 A; diG/dt = 0.45 A/µs 300 mA IH TVJ = 25°C; VD = 6 V; RGK = ¥ 200 mA tgd TVJ = 25°C; VD = ½ VDRM IG = 0.45 A; diG/dt = 0.45 A/µs 2 µs tq TVJ = TVJM; IT = 120 A, tP = 200 µs; -di/dt = 10 A/µstyp. VR = 100 V; dv/dt = 20 V/µs; VD = 2/3 VDRM 150 µs QS IRM TVJ = TVJM; IT, IF = 200 A, -di/dt = 50 A/µs 330 180 µC A RthJC RthCH per thyristor/diode; DC current per module per thyristor/diode; DC current 0.2 0.1 0.1 K/W K/W K/W dS dA a Creepage distance on surface Strike distance through air Maximum allowable acceleration 12.7 9.6 50 mm mm m/s2 typ. Optional accessories for modules Keyed gate/cathode twin plugs with wire length = 350 mm, gate = yellow, cathode = red Type ZY 180L (L = Left for pin pair 4/5) UL Styles 1385, Type ZY 180R (R = right for pin pair 6/7) CSA Class 5851, File 41234 © 2000 IXYS All rights reserved 2-2