MMBFJ177LT1 JFET Chopper P−Channel − Depletion Features • Pb−Free Package is Available http://onsemi.com 2 SOURCE MAXIMUM RATINGS Rating Drain−Gate Voltage Reverse Gate−Source Voltage Symbol Value Unit VDG 25 Vdc VGS(r) −25 Vdc 3 GATE 1 DRAIN Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 3 SOT−23 (TO−236AB) CASE 318−08 STYLE 10 THERMAL CHARACTERISTICS Total Device Dissipation FR− 5 Board (Note 1) TA = 25°C Derate above 25°C Thermal Resistance, Junction−to−Ambient Junction and Storage Temperature PD 225 mW 1.8 mW/°C RqJA 556 °C/W TJ, Tstg −55 to +150 °C 1 2 MARKING DIAGRAM 6Y MG G 1. FR−5 = 1.0 0.75 0.062 in. 1 6Y = Specific Device Code M = Date Code G = Pb−Free Package (Note: Microdot may be in either location) ORDERING INFORMATION Device Package Shipping† MMBFJ177LT1 SOT−23 3000 Tape & Reel SOT−23 (Pb−Free) 3000 Tape & Reel MMBFJ177LT1G †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. © Semiconductor Components Industries, LLC, 2005 November, 2005 − Rev. 3 1 Publication Order Number: MMBFJ177LT1/D MMBFJ177LT1 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Symbol Min Max Unit V(BR)GSS 30 − Vdc IGSS − 1.0 nAdc VGS(off) 0.8 2.5 Vdc Zero−Gate−Voltage Drain Current (VGS = 0, VDS = 15 Vdc) (Note 2) IDSS 1.5 20 mAdc Drain Cutoff Current (VDS = 15 Vdc, VGS = 10 Vdc) ID(off) − 1.0 nAdc rDS(on) − 300 W Ciss − 11 pF Crss − 5.5 Characteristic OFF CHARACTERISTICS Gate−Source Breakdown Voltage (VDS = 0, ID = 1.0 mAdc) Gate Reverse Current (VDS = 0 Vdc, VGS = 20 Vdc) Gate Source Cutoff Voltage (VDS = 15 Vdc, ID = 10 nAdc) ON CHARACTERISTICS Drain Source On Resistance (ID = 500 mAdc) Input Capacitance Reverse Transfer Capacitance VDS = 0, VGS = 10 Vdc f = 1.0 MHz 2. Pulse Test: Pulse Width < 300 ms, Duty Cycle ≤ 2%. http://onsemi.com 2 MMBFJ177LT1 PACKAGE DIMENSIONS SOT−23 (TO−236AB) CASE 318−08 ISSUE AN NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. 318−01 THRU −07 AND −09 OBSOLETE, NEW STANDARD 318−08. D SEE VIEW C 3 HE E c 1 2 b DIM A A1 b c D E e L L1 HE 0.25 e q A L A1 L1 MIN 0.89 0.01 0.37 0.09 2.80 1.20 1.78 0.10 0.35 2.10 MILLIMETERS NOM MAX 1.00 1.11 0.06 0.10 0.44 0.50 0.13 0.18 2.90 3.04 1.30 1.40 1.90 2.04 0.20 0.30 0.54 0.69 2.40 2.64 MIN 0.035 0.001 0.015 0.003 0.110 0.047 0.070 0.004 0.014 0.083 INCHES NOM 0.040 0.002 0.018 0.005 0.114 0.051 0.075 0.008 0.021 0.094 MAX 0.044 0.004 0.020 0.007 0.120 0.055 0.081 0.012 0.029 0.104 STYLE 10: PIN 1. DRAIN 2. SOURCE 3. GATE VIEW C SOLDERING FOOTPRINT* 0.95 0.037 0.95 0.037 2.0 0.079 0.9 0.035 0.8 0.031 SCALE 10:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Phone: 81−3−5773−3850 http://onsemi.com 3 For additional information, please contact your local Sales Representative. MMBFJ177LT1/D