(NPN) MPS8098, MPS8099*, (PNP) MPS8598, MPS8599* *Preferred Devices Amplifier Transistors Voltage and Current are Negative for PNP Transistors http://onsemi.com Features • Pb−Free Packages are Available* MAXIMUM RATINGS Rating Symbol Collector −Emitter Voltage MPS8098, MPS8598 MPS8099, MPS8599 VCEO Collector −Base Voltage MPS8098, MPS8598 MPS8099, MPS8599 VCBO Emitter −Base Voltage Value Unit 2 BASE COLLECTOR 3 2 BASE Vdc 60 80 1 EMITTER 1 EMITTER Vdc 60 80 VEBO 4.0 Vdc Collector Current − Continuous IC 500 mAdc Total Device Dissipation @ TA = 25°C Derate above 25°C PD 625 5.0 mW mW/°C Total Device Dissipation @ TC = 25°C Derate above 25°C PD 1.5 12 W mW/°C TJ, Tstg −55 to +150 °C Characteristic Symbol Max Unit Thermal Resistance, Junction−to−Ambient (Note 1) RqJA 200 °C/W Thermal Resistance, Junction−to−Case RqJC 83.3 °C/W Operating and Storage Junction Temperature Range PNP NPN COLLECTOR 3 STYLE 1 MPS8098, MPS8099 TO−92 CASE 29−11 STYLE 1 1 2 STYLE 1 MPS8598, MPS8599 3 THERMAL CHARACTERISTICS Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. RqJA is measured with the device soldered into a typical printed circuit board. MARKING DIAGRAM MPS 8x9y AYWW G G MPS8x9y = Device Code x = 0 or 5 y = 8 or 9 A = Assembly Location Y = Year WW = Work Week G = Pb−Free Package (Note: Microdot may be in either location) ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 6 of this data sheet. *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2006 January, 2006 − Rev. 5 1 Preferred devices are recommended choices for future use and best overall value. Publication Order Number: MPS8098/D (NPN) MPS8098, MPS8099*, (PNP) MPS8598, MPS8599* ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Max 60 80 − − 60 80 − − 6.0 5.0 − − − 0.1 − − 0.1 0.1 − − 0.1 0.1 100 100 75 300 − − − − 0.4 0.3 0.5 0.6 0.7 0.8 150 − − − 6.0 8.0 − − 25 30 Unit OFF CHARACTERISTICS Collector −Emitter Breakdown Voltage (Note 2) (IC = 10 mAdc, IB = 0) V(BR)CEO Vdc MPS8098, MPS8598 MPS8099, MPS8599 Collector −Base Breakdown Voltage (IC = 100 mAdc, IE = 0) V(BR)CBO Vdc MPS8098, MPS8598 MPS8099, MPS8599 Emitter −Base Breakdown Voltage (IE = 10 mAdc, IC = 0) V(BR)EBO Vdc MPS8098, MPS8099 MPS8598, MPS8599 Collector Cutoff Current (VCE = 60 Vdc, IB = 0) ICES Collector Cutoff Current (VCB = 60 Vdc, IE = 0) (VCB = 80 Vdc, IE = 0) MPS8098, MPS8598 MPS8099, MPS8599 Emitter Cutoff Current (VEB = 6.0 Vdc, IC = 0) (VEB = 4.0 Vdc, IC = 0) MPS8098, MPS8099 MPS8598, MPS8599 mAdc mAdc ICBO mAdc IEBO ON CHARACTERISTICS (Note 2) DC Current Gain (IC = 1.0 mAdc, VCE = 5.0 Vdc) (IC = 10 mAdc, VCE = 5.0 Vdc) (IC = 100 mAdc, VCE = 5.0 Vdc) hFE Collector −Emitter Saturation Voltage (IC = 100 mAdc, IB = 5.0 mAdc) (IC = 100 mAdc, IB = 10 mAdc) − VCE(sat) Base−Emitter On Voltage (IC = 1.0 mAdc, VCE = 5.0 Vdc) (IC = 10 mAdc, VCE = 5.0 Vdc) Vdc VBE(on) Vdc MPS8098, MPS8598 MPS8099, MPS8599 SMALL− SIGNAL CHARACTERISTICS Current −Gain − Bandwidth Product (IC = 10 mAdc, VCE = 5.0 Vdc, f = 100 MHz) fT Output Capacitance (VCB = 5.0 Vdc, IE = 0, f = 1.0 MHz) Cobo pF MPS8098, MPS8099 MPS8598, MPS8599 Input Capacitance (VEB = 0.5 Vdc, IC = 0, f = 1.0 MHz) MHz Cibo pF MPS8098, MPS8099 MPS8598, MPS8599 r(t), NORMALIZED TRANSIENT THERMAL RESISTANCE 2. Pulse Test: Pulse Width v 300 ms, Duty Cycle = 2.0%. 1.0 0.7 0.5 D = 0.5 0.2 0.3 0.2 0.1 0.07 0.05 0.1 0.05 0.02 SINGLE PULSE ZqJC(t) = r(t) • RqJC TJ(pk) − TC = P(pk) ZqJC(t) ZqJA(t) = r(t) • RqJA TJ(pk) − TA = P(pk) ZqJA(t) D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 (SEE AN469) P(pk) 0.01 t1 SINGLE PULSE 0.03 t2 0.02 DUTY CYCLE, D = t1/t2 0.01 1.0 2.0 5.0 10 20 50 100 200 t, TIME (ms) 500 1.0 k 2.0 k 5.0 k 10 k Figure 1. MPS8098, MPS8099, MPS8598 and MPS8599 Thermal Response http://onsemi.com 2 20 k 50 k 100 k (NPN) MPS8098, MPS8099*, (PNP) MPS8598, MPS8599* TURN−ON TIME VCC −1.0 V 5.0 ms TURN−OFF TIME 100 +40 V 100 RL RL OUTPUT +10 V Vin 0 VCC +VBB +40 V tr = 3.0 ns OUTPUT RB Vin * CS t 6.0 pF 5.0 mF RB * CS t 6.0 pF 5.0 mF 100 100 5.0 ms tr = 3.0 ns *Total Shunt Capacitance of Test Jig and Connectors For PNP Test Circuits, Reverse All Voltage Polarities Figure 2. Switching Time Test Circuits PNP 300 300 TJ = 25°C 200 TJ = 25°C 200 5.0 V VCE = 1.0 V 100 −5.0 V VCE = −1.0 V 100 70 50 30 f T , CURRENT−GAIN − BANDWIDTH PRODUCT (MHz) f T , CURRENT−GAIN − BANDWIDTH PRODUCT (MHz) NPN 2.0 1.0 3.0 5.0 7.0 10 20 30 50 70 100 70 50 30 −1.0 −2.0 −3.0 −5.0 −7.0 −10 −20 −30 IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA) Figure 3. MPS8098/99 Current−Gain − Bandwidth Product Figure 4. MPS8598/99 Current−Gain − Bandwidth Product 40 40 25°C TTJJ==25°C 20 C, CAPACITANCE (pF) C, CAPACITANCE (pF) TJ = 25°C Cibo 10 8.0 6.0 4.0 2.0 −50 −70 −100 0.2 0.5 1.0 2.0 5.0 10 Cibo 10 8.0 6.0 Cobo 4.0 Cobo 0.1 20 20 50 100 2.0 −0.1 −0.2 −0.5 −1.0 −2.0 −5.0 −10 −20 VR, REVERSE VOLTAGE (VOLTS) VR, REVERSE VOLTAGE (VOLTS) Figure 5. MPS8098/99 Capacitance Figure 6. MPS8598/99 Capacitance http://onsemi.com 3 −50 −100 (NPN) MPS8098, MPS8099*, (PNP) MPS8598, MPS8599* NPN 1.0 k 700 500 VCC = 40 V IC/IB = 10 IB1 = IB2 TJ = 25°C 300 1.0 k 700 500 ts 200 100 70 50 tf 30 10 20 30 50 70 10 100 200 tr −20 −10 −30 −50 −70 −200 −100 IC, COLLECTOR CURRENT (mA) Figure 7. MPS8098/99 Switching Times Figure 8. MPS8598/99 Switching Times 1.0 k 700 500 −1.0 k −700 −500 300 −300 −200 200 100 70 50 −100 −70 −50 CURRENT LIMIT THERMAL LIMIT SECOND BREAKDOWN LIMIT 30 20 MPS8098 MPS8099 DUTY CYCLE ≤ 10% 10 td @ VBE(off) = −0.5 V IC, COLLECTOR CURRENT (mA) I C , COLLECTOR CURRENT (mA) I C , COLLECTOR CURRENT (mA) tf 100 70 50 20 tr td @ VBE(off) = 0.5 V 10 200 30 20 VCC = −40 V IC/IB = 10 IB1 = IB2 TJ = 25°C ts 300 t, TIME (ns) t, TIME (ns) PNP 1.0 2.0 3.0 5.0 7.0 10 20 30 50 −30 −20 −10 70 100 CURRENT LIMIT THERMAL LIMIT SECOND BREAKDOWN LIMIT MPS8598 DUTY CYCLE ≤ 10% MPS8599 −1.0 −2.0 −3.0 −5.0 −7.0 −10 −20 −30 −50 −70 −100 VCE, COLLECTOR−EMITTER VOLTAGE (VOLTS) VCE, COLLECTOR−EMITTER VOLTAGE (VOLTS) Figure 9. MPS8098/99 Active−Region Safe Operating Area Figure 10. MPS8598/99 Active−Region Safe Operating Area 400 300 TJ = 125°C 200 25°C 200 h FE , DC CURRENT GAIN h FE , DC CURRENT GAIN TJ = 125°C −55°C 100 VCE = 5.0 V 80 60 40 0.2 0.3 0.5 1.0 2.0 3.0 5.0 10 20 30 50 100 200 25°C 100 70 −55°C VCE = −5.0 V 50 30 −0.2 −0.5 −1.0 −2.0 −5.0 −10 −20 −50 −100 −200 IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA) Figure 11. MPS8098/99 DC Current Gain Figure 12. MPS8598/99 DC Current Gain http://onsemi.com 4 (NPN) MPS8098, MPS8099*, (PNP) MPS8598, MPS8599* NPN 1.0 TJ = 25°C 0.8 0.6 TJ = 25°C 0.8 VBE(sat) @ IC/IB = 10 V, VOLTAGE (VOLTS) V, VOLTAGE (VOLTS) PNP 1.0 VBE @ VCE = 5.0 V 0.4 0.2 VBE(sat) @ IC/IB = 10 0.6 VBE @ VCE = 5.0 V 0.4 0.2 VCE(sat) @ IC/IB = 10 VCE(sat) @ IC/IB = 10 0.5 1.0 2.0 5.0 10 20 50 100 0 0.2 200 2.0 20 50 100 IC = 20 mA IC = 50 mA IC = 200 mA IC = 100 mA 1.2 0.8 IC = 10 mA 0.05 0.1 0.2 0.5 1.0 2.0 5.0 10 20 200 2.0 IC = 10 mA 1.6 IC = 50 mA IC = 20 mA IC = 100 mA IC = 200 mA 1.2 0.8 0.4 TJ = 25°C 0 0.05 0.1 0.02 IB, BASE CURRENT (mA) 0.2 0.5 1.0 2.0 5.0 10 20 IB, BASE CURRENT (mA) Figure 15. MPS8098/99 Collector Saturation Region Figure 16. MPS8598/99 Collector Saturation Region −1.0 −1.0 R qVB , TEMPERATURE COEFFICIENT (mV/° C) R qVB , TEMPERATURE COEFFICIENT (mV/° C) 10 Figure 14. MPS8598/99 “ON” Voltages 1.6 −1.4 −1.4 −1.8 −1.8 RqVB FOR VBE −55°C TO 125°C −2.2 RqVB FOR VBE −55°C TO 125°C −2.2 −2.6 −2.6 −3.0 5.0 Figure 13. MPS8098/99 “ON” Voltages TJ = 25°C 0 0.02 1.0 IC, COLLECTOR CURRENT (mA) 2.0 0.4 0.5 IC, COLLECTOR CURRENT (mA) VCE , COLLECTOR−EMITTER VOLTAGE (VOLTS VCE , COLLECTOR−EMITTER VOLTAGE (VOLTS) 0 0.2 0.2 0.5 1.0 2.0 5.0 10 20 50 100 200 −3.0 0.2 0.5 1.0 2.0 5.0 10 20 50 100 IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA) Figure 17. MPS8098/99 Base−Emitter Temperature Coefficient Figure 18. MPS8598/99 Base−Emitter Temperature Coefficient http://onsemi.com 5 200 (NPN) MPS8098, MPS8099*, (PNP) MPS8598, MPS8599* ORDERING INFORMATION Device MPS8098 MPS8098G MPS8098RLRA MPS8098RLRAG MPS8099 MPS8099G MPS8099RLRA MPS8099RLRAG MPS8099RLRM MPS8099RLRMG MPS8099RLRP MPS8099RLRPG MPS8598 MPS8598G MPS8598RLRA MPS8598RLRAG MPS8599 MPS8599G MPS8599RLRA MPS8599RLRAG MPS8599RLRM MPS8599RLRMG Package Shipping † TO−92 5,000 Units / Box TO−92 (Pb−Free) 5,000 Units / Box TO−92 2,000 / Tape & Reel TO−92 (Pb−Free) 2,000 / Tape & Reel TO−92 5,000 Units / Box TO−92 (Pb−Free) 5,000 Units / Box TO−92 2,000 / Tape & Reel TO−92 (Pb−Free) 2,000 / Tape & Reel TO−92 2,000 / Ammo Pack TO−92 (Pb−Free) 2,000 / Ammo Pack TO−92 2,000 / Ammo Pack TO−92 (Pb−Free) 2,000 / Ammo Pack TO−92 5,000 Units / Box TO−92 (Pb−Free) 5,000 Units / Box TO−92 2,000 / Tape & Reel TO−92 (Pb−Free) 2,000 / Tape & Reel TO−92 5,000 Units / Box TO−92 (Pb−Free) 5,000 Units / Box TO−92 2,000 / Tape & Reel TO−92 (Pb−Free) 2,000 / Tape & Reel TO−92 2,000 / Ammo Pack TO−92 (Pb−Free) 2,000 / Ammo Pack †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. http://onsemi.com 6 (NPN) MPS8098, MPS8099*, (PNP) MPS8598, MPS8599* PACKAGE DIMENSIONS TO−92 (TO−226) CASE 29−11 ISSUE AL A NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. B R P L SEATING PLANE DIM A B C D G H J K L N P R V K D X X G J H V C SECTION X−X 1 N INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.021 0.045 0.055 0.095 0.105 0.015 0.020 0.500 −−− 0.250 −−− 0.080 0.105 −−− 0.100 0.115 −−− 0.135 −−− MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.407 0.533 1.15 1.39 2.42 2.66 0.39 0.50 12.70 −−− 6.35 −−− 2.04 2.66 −−− 2.54 2.93 −−− 3.43 −−− STYLE 1: PIN 1. EMITTER 2. BASE 3. COLLECTOR N ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800−282−9855 Toll Free Literature Distribution Center for ON Semiconductor USA/Canada P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Phone: 81−3−5773−3850 Email: [email protected] http://onsemi.com 7 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. MPS8098/D