FREESCALE MRF5S19090HSR3

Freescale Semiconductor
Technical Data
Document Number: MRF5S19090H
Rev. 2, 5/2006
RF Power Field Effect Transistors
N - Channel Enhancement - Mode Lateral MOSFETs
Designed for PCN and PCS base station applications with frequencies from
1900 to 2000 MHz. Suitable for TDMA, CDMA and multicarrier amplifier
applications.
• Typical 2 - Carrier N - CDMA Performance: VDD = 28 Volts, IDQ = 850 mA,
Pout = 18 Watts Avg., Full Frequency Band, IS - 95 CDMA (Pilot, Sync,
Paging, Traffic Codes 8 Through 13) Channel Bandwidth = 1.2288 MHz.
PAR = 9.8 dB @ 0.01% Probability on CCDF.
Power Gain — 14.5 dB
Drain Efficiency — 25.8%
IM3 @ 2.5 MHz Offset — - 37 dBc in 1.2288 MHz Bandwidth
ACPR @ 885 kHz Offset — - 51 dB in 30 kHz Bandwidth
• Capable of Handling 10:1 VSWR, @ 28 Vdc, 1960 MHz, 90 Watts CW
Output Power
Features
• Characterized with Series Equivalent Large - Signal Impedance Parameters
• Internally Matched for Ease of Use
• Qualified Up to a Maximum of 32 VDD Operation
• Integrated ESD Protection
• Lower Thermal Resistance Package
• Low Gold Plating Thickness on Leads, 40μ″ Nominal.
• RoHS Compliant
• In Tape and Reel. R3 Suffix = 250 Units per 56 mm, 13 inch Reel.
MRF5S19090HR3
MRF5S19090HSR3
1930- 1990 MHz, 18 W AVG., 28 V
2 x N - CDMA
LATERAL N - CHANNEL
RF POWER MOSFETs
CASE 465 - 06, STYLE 1
NI - 780
MRF5S19090HR3
CASE 465A - 06, STYLE 1
NI - 780S
MRF5S19090HSR3
Table 1. Maximum Ratings
Rating
Symbol
Value
Unit
Drain- Source Voltage
VDSS
- 0.5, +65
Vdc
Gate- Source Voltage
VGS
- 0.5, +15
Vdc
Total Device Dissipation @ TC = 25°C
Derate above 25°C
PD
266
1.52
W
W/°C
Storage Temperature Range
Tstg
- 65 to +200
°C
Case Operating Temperature
TC
150
°C
Operating Junction Temperature
TJ
200
°C
Symbol
Value (1,2)
Table 2. Thermal Characteristics
Characteristic
Thermal Resistance, Junction to Case
Case Temperature 80°C, 65 W CW
Case Temperature 78°C, 18 W CW
RθJC
0.66
0.68
Unit
°C/W
1. MTTF calculator available at http://www.freescale.com/rf. Select Tools/Software/Application Software/Calculators to access
the MTTF calculators by product.
2. Refer to AN1955, Thermal Measurement Methodology of RF Power Amplifiers. Go to http://www.freescale.com/rf.
Select Documentation/Application Notes - AN1955.
© Freescale Semiconductor, Inc., 2006. All rights reserved.
RF Device Data
Freescale Semiconductor
MRF5S19090HR3 MRF5S19090HSR3
1
Table 3. ESD Protection Characteristics
Test Conditions
Class
Human Body Model
1 (Minimum)
Machine Model
M3 (Minimum)
Charge Device Model
C7 (Minimum)
Table 4. Electrical Characteristics (TC = 25°C unless otherwise noted)
Symbol
Min
Typ
Max
Unit
Zero Gate Voltage Drain Leakage Current
(VDS = 65 Vdc, VGS = 0 Vdc)
IDSS
—
—
10
μAdc
Zero Gate Voltage Drain Leakage Current
(VDS = 28 Vdc, VGS = 0 Vdc)
IDSS
—
—
1
μAdc
Gate- Source Leakage Current
(VGS = 5 Vdc, VDS = 0 Vdc)
IGSS
—
—
1
μAdc
Gate Threshold Voltage
(VDS = 10 Vdc, ID = 200 μAdc)
VGS(th)
2.5
2.7
3.5
Vdc
Gate Quiescent Voltage
(VDS = 28 Vdc, ID = 850 mAdc)
VGS(Q)
—
3.7
—
Vdc
Drain- Source On - Voltage
(VGS = 10 Vdc, ID = 2 Adc)
VDS(on)
—
0.26
—
Vdc
Forward Transconductance
(VDS = 10 Vdc, ID = 2 Adc)
gfs
—
5
—
S
Crss
—
1.7
—
pF
Characteristic
Off Characteristics
On Characteristics (DC)
Dynamic Characteristics (1)
Reverse Transfer Capacitance
(VDS = 28 Vdc ± 30 mV(rms)ac @ 1 MHz, VGS = 0 Vdc)
Functional Tests (In Freescale Test Fixture, 50 ohm system) VDD = 28 Vdc, IDQ = 850 mA, Pout = 18 W Avg., f1 = 1930 MHz,
f2 = 1932.5 MHz and f1 = 1987.5 MHz, f2 =1990 MHz,2 - Carrier N - CDMA, 1.2288 MHz Channel Bandwidth Carriers. ACPR measured in
30 kHz Channel Bandwidth @ ±885 kHz Offset. IM3 measured in 1.2288 MHz Channel Bandwidth @ ±2.5 MHz Offset. PAR = 9.8 dB @
0.01% Probability on CCDF.
Power Gain
Gps
13.5
14.5
—
dB
Drain Efficiency
ηD
24
25.8
—
%
Intermodulation Distortion
Adjacent Channel Power Ratio
Input Return Loss
IM3
—
- 37
- 35
dBc
ACPR
—
- 51
- 48
dBc
IRL
—
- 14.5
-9
dB
1. Part is internally matched both on input and output.
MRF5S19090HR3 MRF5S19090HSR3
2
RF Device Data
Freescale Semiconductor
B1
W1
VBIAS
+
R2
R1
VSUPPLY
C3
C4
C5
+
+
R3
C8
C7
C13
C11
+
C9
C12
+
C10
R4
C6
Z9
Z6
RF
INPUT
Z1
Z1
Z2
Z3
Z4
Z5
Z6
Z7
Z2
Z3
C15
C14
Z4
Z5
DUT
Z8
Z10
Z11
Z12
Z7
Z13
RF
OUTPUT
C2
C1
0.140″ x 0.080″ Microstrip
0.450″ x 0.080″ Microstrip
0.140″ x 0.080″ Microstrip
0.525″ x 0.080″ Microstrip
0.636″ x 0.141″ Microstrip
0.340″ x 0.050″ Microstrip
0.320″ x 1.401″ Microstrip
Z8
Z9
Z10
Z11
Z12
Z13
PCB
0.091″ x 1.133″ Microstrip
0.542″ x 0.071″ Microstrip
0.450″ x 1.133″ Microstrip
0.640″ x 0.141″ Microstrip
0.316″ x 0.080″ Microstrip
1.209″ x 0.080″ Microstrip
Arlon GX - 0300- 55- 22, 0.030″, εr = 2.55
Figure 1. MRF5S19090HR3(HSR3) Test Circuit Schematic
Table 5. MRF5S19090HR3(HSR3) Test Circuit Component Designations and Values
Part
Description
Part Number
Manufacturer
B1
Short RF Bead
95F786
Newark
C1
22 pF Chip Capacitor
100B220CP 500X
ATC
C2
10 pF Chip Capacitor
100B100CP 500X
ATC
C3, C13
1 μF, 50 V SMT Tantalum Capacitors
T494C105(1)050AS
Kemet
C4, C12
0.1 μF Chip Capacitors
CDR33BX104AKWS
Kemet
C5, C11
1k pF Chip Capacitors
100B102JP 500X
ATC
C6, C7
4.3 pF Chip Capacitors
100B4R3JP 500X
ATC
C8
10 μF, 35 V SMT Tantalum Capacitor
T494D106(1)035AS
Kemet
C9, C10
22 μF, 35 V SMT Tantalum Capacitors
T494X226(1)035AS
Kemet
C14
2.7 pF Chip Capacitor
100B2.7BP 500X
ATC
C15
0.6 – 4.5 Gigatrim Variable Capacitor
44F3358
Newark
R1
1 kW Chip Resistor
D5534M07B1K00R
Newark
R2
560 kW Chip Resistor
CR1206 564JT
Newark
R3, R4
12 W Chip Resistors
RM73B2B120JT
Garrett Electronics
W1
1 turn 14 gauge wire
MRF5S19090HR3 MRF5S19090HSR3
RF Device Data
Freescale Semiconductor
3
C8
C13
C7
VGG
R1
R3
B1
W1
C6
C9
CUT OUT AREA
C14
C15
VDD
R4
C12
R2 C3 C4C5
C1
C11
C10
C2
MRF5S19090
Rev 02
Freescale has begun the transition of marking Printed Circuit Boards (PCBs) with the Freescale Semiconductor
signature/logo. PCBs may have either Motorola or Freescale markings during the transition period. These changes will have
no impact on form, fit or function of the current product.
Figure 2. MRF5S19090HR3(HSR3) Test Circuit Component Layout
MRF5S19090HR3 MRF5S19090HSR3
4
RF Device Data
Freescale Semiconductor
ηD, DRAIN
EFFICIENCY (%)
40
Gps
G ps , POWER GAIN (dB)
14
ηD
12
10
IRL
30
VDD = 28 Vdc, Pout = 18 W (Avg.), IDQ = 850 mA
2−Carrier N−CDMA, 2.5 MHz Carrier Spacing
1.2288 MHz Channel Bandwidth
PAR = 9.8 dB @ 0.01% Probability (CCDF)
20
−20
IM3
8
0
IM3 (dBc), ACPR (dBc)
16
−40
ACPR
−10
−20
−30
−40
6
−60
1860 1880 1900 1920 1940 1960 1980 2000 2020 2040 2060 2080
−50
IRL, INPUT RETURN LOSS (dB)
TYPICAL CHARACTERISTICS
f, FREQUENCY (MHz)
Figure 3. 2 - Carrier N - CDMA Broadband Performance
−15
G ps , POWER GAIN (dB)
IDQ = 1300 mA
16
15
1100 mA
850 mA
650 mA
14
13
450 mA
VDD = 28 Vdc
f1 = 1958.75 MHz, f2 = 1961.25 MHz
Two−Tone Measurement, 2.5 MHz Tone Spacing
12
10
VDD = 28 Vdc
f1 = 1958.75 MHz, f2 = 1961.25 MHz
Two−Tone Measurement, 2.5 MHz Tone Spacing
−20
−25
−30
−35
IDQ = 450 mA
−40
1100 mA
1300 mA
−45
−50
850 mA
650 mA
−55
100
1
10
100
Pout, OUTPUT POWER (WATTS) PEP
Pout, OUTPUT POWER (WATTS) PEP
Figure 4. Two - Tone Power Gain versus
Output Power
Figure 5. Third Order Intermodulation Distortion
versus Output Power
−25
56
VDD = 28 Vdc, Pout = 90 W (PEP), IDQ = 850 mA
−30
3rd Order
−35
−40
Ideal
55
Pout , OUTPUT POWER (dBm)
IMD, INTERMODULATION DISTORTION (dBc)
1
IMD, THIRD ORDER
INTERMODULATION DISTORTION (dBc)
17
5th Order
−45
7th Order
P3dB = 51.21 dBm (132.13 W)
54
53
P1dB = 50.82 dBm (120.78 W)
52
51
Actual
50
49
48
VDD = 28 Vdc, IDQ = 850 mA
Pulsed CW, 8 μsec(on), 1 msec(off)
f = 1960 MHz
47
−50
Two−Tone Measurements
(f1 + f2)/2 = Center Frequency of 1960 MHz
−55
0.1
1
10
46
45
31
32
33
34
35
36
37
38
39
40
41
TWO−TONE SPACING (MHz)
Pin, INPUT POWER (dBm)
Figure 6. Intermodulation Distortion Products
versus Tone Spacing
Figure 7. Pulse CW Output Power versus
Input Power
42
MRF5S19090HR3 MRF5S19090HSR3
RF Device Data
Freescale Semiconductor
5
40
30
IM3
−30
−35
ηD
25
IM3
20
−45
Gps
15
−40
−50
ηD
10
−55
ACPR
5
IM3 (dBc), ACPR (dBc)
35
109
−25
VDD = 28 Vdc, IDQ = 850 mA
f1 = 1958.75 MHz, f2 = 1961.25 MHz
2 x N−CDMA, 2.5 MHz @ 1.2288 MHz Bandwidth
PAR = 9.8 dB @ 0.01% Probability (CCDF)
−60
0
MTTF FACTOR (HOURS X AMPS2)
ηD, DRAIN EFFICIENCY (%), Gps, POWER GAIN (dB)
TYPICAL CHARACTERISTICS
107
106
100
−65
1
108
10
120
Pout, OUTPUT POWER (WATTS) AVG.
140
160
180
200
220
TJ, JUNCTION TEMPERATURE (°C)
Figure 8. 2 - Carrier N - CDMA ACPR, IM3, Power Gain
and Drain Efficiency versus Output Power
This above graph displays calculated MTTF in hours x ampere2
drain current. Life tests at elevated temperatures have correlated to
better than ±10% of the theoretical prediction for metal failure. Divide
MTTF factor by ID2 for MTBF in a particular application.
Figure 9. MTTF Factor versus Junction Temperature
N - CDMA TEST SIGNAL
100
0
1.2288 MHz
Channel BW
−10
−20
1
−IM3 in
1.2288 MHz
Integrated BW
−30
+IM3 in
1.2288 MHz
Integrated BW
−40
0.1
IS−95 CDMA (Pilot, Sync, Paging, Traffic Codes 8
Through 13) 1.2288 MHz Channel Bandwidth
Carriers. ACPR Measured in 30 kHz Bandwidth @
±885 kHz Offset. IM3 Measured in 1.2288 MHz
Bandwidth @ ±2.5 MHz Offset. PAR = 9.8 dB @
0.01% Probability on CCDF.
0.01
0.001
(dB)
PROBABILITY (%)
10
−50
−60
−70
−ACPR in 30 kHz
Integrated BW
+ACPR in 30 kHz
Integrated BW
−80
0.0001
0
2
4
6
8
10
−90
PEAK−TO−AVERAGE (dB)
Figure 10. 2 - Carrier CCDF N - CDMA
−100
−7.5
−6
−4.5
−3
−1.5
0
1.5
3
4.5
6
7.5
f, FREQUENCY (MHz)
Figure 11. 2 - Carrier N - CDMA Spectrum
MRF5S19090HR3 MRF5S19090HSR3
6
RF Device Data
Freescale Semiconductor
f = 1990 MHz
Zo = 10 Ω
Zload
f = 1930 MHz
f = 1990 MHz
Zsource
f = 1930 MHz
VDD = 28 V, IDQ = 850 mA, Pout = 18 W Avg.
f
MHz
Zsource
Ω
Zload
Ω
1930
2.98 - j5.12
2.07 - j1.31
1960
3.36 - j4.65
2.02 - j1.18
1990
4.06 - j4.64
1.93 - j1.01
Zsource = Test circuit impedance as measured from
gate to ground.
Zload
= Test circuit impedance as measured
from drain to ground.
Output
Matching
Network
Device
Under
Test
Input
Matching
Network
Z
source
Z
load
Figure 12. Series Equivalent Source and Load Impedance
MRF5S19090HR3 MRF5S19090HSR3
RF Device Data
Freescale Semiconductor
7
NOTES
MRF5S19090HR3 MRF5S19090HSR3
8
RF Device Data
Freescale Semiconductor
NOTES
MRF5S19090HR3 MRF5S19090HSR3
RF Device Data
Freescale Semiconductor
9
NOTES
MRF5S19090HR3 MRF5S19090HSR3
10
RF Device Data
Freescale Semiconductor
PACKAGE DIMENSIONS
B
G
Q
bbb
2X
1
M
T A
M
B
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M−1994.
2. CONTROLLING DIMENSION: INCH.
3. DELETED
4. DIMENSION H IS MEASURED 0.030 (0.762) AWAY
FROM PACKAGE BODY.
M
3
B
K
2
(FLANGE)
D
bbb
M
T A
M
B
M
M
R
(INSULATOR)
bbb
N
M
T A
M
B
M
ccc
M
T A
M
M
aaa
M
T A
M
B
S
(LID)
ccc
H
(LID)
M
T A
M
B
M
(INSULATOR)
B
M
C
F
E
A
T
A
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M−1994.
2. CONTROLLING DIMENSION: INCH.
3. DELETED
4. DIMENSION H IS MEASURED 0.030 (0.762) AWAY
FROM PACKAGE BODY.
4X Z
(LID)
B
1
K
2X
2
B
D
bbb
M
T A
M
B
M
N
M
R
(LID)
ccc
M
T A
M
B
M
M
B
M
ccc
M
T A
M
aaa
M
T A
M
S
(INSULATOR)
bbb
M
T A
(LID)
B
M
(INSULATOR)
B
M
C
3
E
A
(FLANGE)
DIM
A
B
C
D
E
F
H
K
M
N
R
S
U
Z
aaa
bbb
ccc
INCHES
MIN
MAX
0.805
0.815
0.380
0.390
0.125
0.170
0.495
0.505
0.035
0.045
0.003
0.006
0.057
0.067
0.170
0.210
0.774
0.786
0.772
0.788
0.365
0.375
0.365
0.375
−−−
0.040
−−−
0.030
0.005 REF
0.010 REF
0.015 REF
MILLIMETERS
MIN
MAX
20.45
20.70
9.65
9.91
3.18
4.32
12.57
12.83
0.89
1.14
0.08
0.15
1.45
1.70
4.32
5.33
19.61
20.02
19.61
20.02
9.27
9.53
9.27
9.52
−−−
1.02
−−−
0.76
0.127 REF
0.254 REF
0.381 REF
STYLE 1:
PIN 1. DRAIN
2. GATE
5. SOURCE
H
A
MILLIMETERS
MIN
MAX
33.91
34.16
9.65
9.91
3.18
4.32
12.57
12.83
0.89
1.14
0.08
0.15
27.94 BSC
1.45
1.70
4.32
5.33
19.66
19.96
19.60
20.00
3.00
3.51
9.27
9.53
9.27
9.52
0.127 REF
0.254 REF
0.381 REF
CASE 465 - 06
ISSUE G
NI - 780
MRF5S19090HR3
4X U
(FLANGE)
(FLANGE)
INCHES
MIN
MAX
1.335
1.345
0.380
0.390
0.125
0.170
0.495
0.505
0.035
0.045
0.003
0.006
1.100 BSC
0.057
0.067
0.170
0.210
0.774
0.786
0.772
0.788
.118
.138
0.365
0.375
0.365
0.375
0.005 REF
0.010 REF
0.015 REF
STYLE 1:
PIN 1. DRAIN
2. GATE
3. SOURCE
SEATING
PLANE
(FLANGE)
DIM
A
B
C
D
E
F
G
H
K
M
N
Q
R
S
aaa
bbb
ccc
F
T
SEATING
PLANE
CASE 465A - 06
ISSUE H
NI - 780S
MRF5S19090HSR3
MRF5S19090HR3 MRF5S19090HSR3
RF Device Data
Freescale Semiconductor
11
How to Reach Us:
Home Page:
www.freescale.com
E - mail:
[email protected]
USA/Europe or Locations Not Listed:
Freescale Semiconductor
Technical Information Center, CH370
1300 N. Alma School Road
Chandler, Arizona 85224
+1 - 800- 521- 6274 or +1 - 480- 768- 2130
[email protected]
Europe, Middle East, and Africa:
Freescale Halbleiter Deutschland GmbH
Technical Information Center
Schatzbogen 7
81829 Muenchen, Germany
+44 1296 380 456 (English)
+46 8 52200080 (English)
+49 89 92103 559 (German)
+33 1 69 35 48 48 (French)
[email protected]
Japan:
Freescale Semiconductor Japan Ltd.
Headquarters
ARCO Tower 15F
1 - 8 - 1, Shimo - Meguro, Meguro - ku,
Tokyo 153 - 0064
Japan
0120 191014 or +81 3 5437 9125
[email protected]
Asia/Pacific:
Freescale Semiconductor Hong Kong Ltd.
Technical Information Center
2 Dai King Street
Tai Po Industrial Estate
Tai Po, N.T., Hong Kong
+800 2666 8080
[email protected]
For Literature Requests Only:
Freescale Semiconductor Literature Distribution Center
P.O. Box 5405
Denver, Colorado 80217
1 - 800- 441- 2447 or 303 - 675- 2140
Fax: 303 - 675- 2150
[email protected]
Information in this document is provided solely to enable system and software
implementers to use Freescale Semiconductor products. There are no express or
implied copyright licenses granted hereunder to design or fabricate any integrated
circuits or integrated circuits based on the information in this document.
Freescale Semiconductor reserves the right to make changes without further notice to
any products herein. Freescale Semiconductor makes no warranty, representation or
guarantee regarding the suitability of its products for any particular purpose, nor does
Freescale Semiconductor assume any liability arising out of the application or use of
any product or circuit, and specifically disclaims any and all liability, including without
limitation consequential or incidental damages. “Typical” parameters that may be
provided in Freescale Semiconductor data sheets and/or specifications can and do
vary in different applications and actual performance may vary over time. All operating
parameters, including “Typicals”, must be validated for each customer application by
customer’s technical experts. Freescale Semiconductor does not convey any license
under its patent rights nor the rights of others. Freescale Semiconductor products are
not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life,
or for any other application in which the failure of the Freescale Semiconductor product
could create a situation where personal injury or death may occur. Should Buyer
purchase or use Freescale Semiconductor products for any such unintended or
unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all
claims, costs, damages, and expenses, and reasonable attorney fees arising out of,
directly or indirectly, any claim of personal injury or death associated with such
unintended or unauthorized use, even if such claim alleges that Freescale
Semiconductor was negligent regarding the design or manufacture of the part.
Freescalet and the Freescale logo are trademarks of Freescale Semiconductor, Inc.
All other product or service names are the property of their respective owners.
© Freescale Semiconductor, Inc. 2006. All rights reserved.
MRF5S19090HR3 MRF5S19090HSR3
Document Number: MRF5S19090H
Rev. 2, 5/2006
12
RF Device Data
Freescale Semiconductor