2N4117 N-CHANNEL JFET Linear Systems replaces discontinued Siliconix 2N4117 The 2N4117 is an Ultra-High Input Impedance N-Channel JFET The 2N4117 provides ultra-high input impedance. The device is specified with a 10-pA limit and is ideal for use as a high-impedance sensitive front-end amplifier. 2N4117 Benefits: Insignificant Signal Loss/Error Voltage with High-Impedance Source Low Power Consumption (Battery) Maximum Signal Output, Low Noise High Sensitivity to Low-Level Signals 2N4117 Applications: High-Impedance Transducer Smoke Detector Input Infrared Detector Amplifier Precision Test Equipment FEATURES DIRECT REPLACEMENT FOR SILICONIX 2N4117 LOW POWER MINIMUM CIRCUIT LOADING ABSOLUTE MAXIMUM RATINGS @ 25°C (unless otherwise noted) Maximum Temperatures Storage Temperature Operating Junction Temperature Maximum Power Dissipation Continuous Power Dissipation MAXIMUM CURRENT Gate Current (Note 1) MAXIMUM VOLTAGES Gate to Drain or Gate to Source (Note 2) IDSS<90 µA IGSS<10 pA ‐65°C to +175°C ‐55°C to +150°C 300mW 50mA ‐40V 2N4117 ELECTRICAL CHARACTERISTICS @ 25°C (unless otherwise noted) SYMBOL CHARACTERISTIC MIN TYP. MAX UNITS CONDITIONS BVGSS Gate to Source Breakdown Voltage ‐40 ‐‐ ‐‐ V IG = ‐1µA, VDS = 0V VGS(off) Gate to Source Cutoff Voltage ‐0.6 ‐‐ ‐1.8 V VDS = 10V, ID = 1nA IDSS Gate to Source Saturation Current 0.03 ‐‐ 0.09 mA VDS = 10V, VGS = 0V IGSS Gate Leakage Current ‐‐ ‐‐ ‐10 pA VGS = ‐20V, VDS = 0V ‐‐ ‐‐ ‐25 VGS = ‐20V, VDS = 0V, 150°C gfs Forward Transconductance(Note 3) 70 ‐‐ 210 µmho VDS = 10V, VGS = 0V, f = 1kHz gos Output Conductance ‐‐ ‐‐ 3 Ciss Input Capacitance ‐‐ ‐‐ 3 pF VDS = 10V, VGS = 0V, f = 1MHz Crss Reverse Transfer Capacitance ‐‐ ‐‐ 1.5 1 . Absolute maximum ratings are limiting values above which 2N4117 serviceability may be impaired. NOTES 2. Due to symmetrical geometry, these units may be operated with source and drain leads interchanged 3. This parameter is measured during a 2ms interval 100ms after power is applied. (Not a JEDEC condition.) Click To Buy Micross Components Europe Available Packages: TO-71 (Bottom View) 2N4117 in TO-71 2N4117 in bare die. Tel: +44 1603 788967 Email: [email protected] Web: http://www.micross.com/distribution Please contact Micross for full package and die dimensions Information furnished by Linear Integrated Systems and Micross Components is believed to be accurate and reliable. However, no responsibility is assumed for its use; nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Linear Integrated Systems. Micross Components Ltd, United Kingdom, Tel: +44 1603 788967, Fax: +44 1603788920, Email: [email protected] Web: www.micross.com/distribution.aspx