NC7NP14 TinyLogic® ULP Triple Inverter with Schmitt Trigger Input Features General Description ■ Space saving US8 package The NC7NP14 is a triple inverter with Schmitt trigger input from Fairchild’s Ultra Low Power (ULP) Series of TinyLogic®. Ideal for applications where battery life is critical, this product is designed for ultra low power consumption within the VCC operating range of 0.9V to 3.6V VCC. ■ Ultra small MicroPak™ package ■ 0.9V to 3.6V VCC supply operation ■ 3.6V overvoltage tolerant I/O’s at VCC from 0.9V to 3.6V ■ Power-Off high impedance inputs and outputs The internal circuit is composed of a minimum of inverter stages, including the output buffer, to enable ultra low static and dynamic power. ■ Static Drive (IOH/IOL): – ±2.6mA @ 3.00V VCC – ±2.1mA @ 2.30V VCC – ±1.5mA @ 1.65V VCC – ±1.0mA @ 1.40V VCC – ±0.5mA @ 1.10V VCC – ±20µA @ 0.9V VCC ■ Low noise switching using design techniques of Quiet Series™ noise/EMI reduction circuitry ■ Ultra low dynamic power The NC7NP14 is designed for optimized power and speed, and is fabricated with an advanced CMOS technology to achieve high speed, low noise operation while maintaining extremely low CMOS power dissipation. Ordering Information Order Number Package Number Product Code Top Mark NC7NP14K8X MAB08A NP14 8-Lead US8, JEDEC MO-187, Variation CA 3.1mm Wide 3k Units on Tape and Reel NC7NP14L8X MAC08A X6 8-Lead MicroPak, 1.6mm Wide 5k Units on Tape and Reel Package Description Supplied As Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering number. All packages are lead free per JEDEC: J-STD-020B standard. Battery Life vs. VCC Supply Voltage 700 600 ULP (SP) 500 Battery Life 400 (Days) 300 ULP-A (SV) 200 UHS (SZ) 100 0 0.9 1.2 1.5 1.8 2.5 3.3 5.0 VCC Supply Voltage ©2005 Fairchild Semiconductor Corporation NC7NP14 Rev. 1.0.0 TinyLogic ULP and ULP-A with up to 50% less power consumption can extend your battery life significantly. Battery Life = (Vbattery x Ibattery x 0.9) / (Pdevice) / 24hrs/day Where, Pdevice = (ICC x VCC) + (CPD + CL) x VCC2 x f Assumes ideal 3.6V Lithium Ion battery with current rating of 900mAH and derated 90% and device frequency at 10MHz, with CL = 15pF load. www.fairchildsemi.com NC7NP14 — TinyLogic® ULP Triple Inverter with Schmitt Trigger Input September 2008 Logic Symbol IEEE/IEC Pin Assignments for US8 Function Table (Top View) Y=A Pin One Orientation Diagram Input Output A Y L H H L H = HIGH Logic Level L = LOW Logic Level AAA represents Product Code Top Mark – see ordering code Note: Orientation of Top Mark determines Pin One location. Read the top product code mark left to right, Pin One is the lower left pin (see diagram). Pad Assignments for MicroPak (Top Thru View) Pin Description Pin Names Description A Input Y Output ©2005 Fairchild Semiconductor Corporation NC7NP14 Rev. 1.0.0 www.fairchildsemi.com 2 NC7NP14 — TinyLogic® ULP Triple Inverter with Schmitt Trigger Input Connection Diagrams Symbol Parameter Rating VCC Supply Voltage –0.5V to +4.6V VIN DC Input Voltage –0.5V to +4.6V VOUT DC Output Voltage HIGH or LOW State(1) VCC = 0V –0.5V to VCC +0.5V –0.5V to +4.6V IIK DC Input Diode Current @ VIN < 0V –50mA IOK DC Output Diode Current VOUT < 0V VOUT > VCC –50mA +50mA DC Output Source/Sink Current ±50mA IOH / IOL ICC or Ground TSTG DC VCC or Ground Current per Supply Pin Storage Temperature Range ±50mA –65°C to +150°C TJ Junction Temperature Under Bias 150°C TL Junction Lead Temperature (Soldering, 10 seconds) 260°C PD Power Dissipation @ +85°C US8 Micropak-8 245mW 165mW Recommended Operating Conditions(2) The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol Parameter Rating VCC Supply Voltage VIN Input Voltage 0V to 3.6V Output Voltage HIGH or LOW State VCC = 0V 0V to VCC 0V to 3.6V VOUT IOH / IOL TA ∆t / ∆V θJA 0.9V to 3.6V Output Current in IOH / IOL VCC = 3.0V to 3.6V VCC = 2.3V to 2.7V VCC = 1.65V to 1.95V VCC = 1.40V to 1.60V VCC = 1.10V to 1.30V VCC = 0.9V ±2.6mA ±2.1mA ±1.5mA ±1.0mA ±0.5mA ±20µA Free Air Operating Temperature –40°C to +85°C Minimum Input Edge Rate @ VIN = 0.8V to 2.0V, VCC = 3.0V Thermal Resistance US8 Micropak-8 10ns/V 265°C/W 395°C/W Notes: 1. IO Absolute Maximum Rating must be observed. 2. Unused inputs must be held HIGH or LOW. They may not float. ©2005 Fairchild Semiconductor Corporation NC7NP14 Rev. 1.0.0 www.fairchildsemi.com 3 NC7NP14 — TinyLogic® ULP Triple Inverter with Schmitt Trigger Input Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. TA = +25°C Symbol VP VN VH VOH VOL VCC (V) Parameter Positive Threshold Voltage Negative Threshold Voltage Hysteresis Voltage HIGH Level Output Voltage LOW Level Output Voltage Conditions Min. Max. Min. Max. Units 0.90 0.3 0.6 0.3 0.6 V 1.10 0.4 1.0 0.4 1.0 1.40 0.5 1.2 0.5 1.2 1.65 0.7 1.5 0.7 1.5 2.30 1.0 1.9 1.0 1.9 3.00 1.5 2.6 1.5 2.6 0.90 0.1 0.6 0.1 0.6 1.10 0.15 0.7 0.15 0.7 1.40 0.2 0.8 0.2 0.8 1.65 0.25 0.9 0.25 0.9 2.30 0.4 1.15 0.4 1.15 3.00 0.6 1.5 0.6 1.5 0.90 0.07 0.5 0.07 0.5 1.10 0.08 0.6 0.08 0.6 1.40 0.09 0.8 0.09 0.8 1.65 0.10 1.0 0.10 1.0 2.30 0.25 1.1 0.25 1.1 3.00 0.60 1.8 0.60 1.8 0.90 IOH = –20µA VCC – 0.1 VCC – 0.1 1.10 ≤ VCC ≤ 1.30 VCC – 0.1 VCC – 0.1 1.40 ≤ VCC ≤ 1.60 VCC – 0.1 VCC – 0.1 1.65 ≤ VCC ≤ 1.95 VCC – 0.1 VCC – 0.1 2.30 ≤ VCC < 2.70 VCC – 0.1 VCC – 0.1 3.00 ≤ VCC ≤ 3.60 VCC – 0.1 VCC – 0.1 1.10 ≤ VCC ≤ 1.30 IOH = –0.5mA 0.75 x VCC 0.70 x VCC 1.40 ≤ VCC ≤ 1.60 IOH = –1.0mA 1.07 0.99 1.65 ≤ VCC ≤ 1.95 IOH = –1.5mA 1.24 1.22 2.30 ≤ VCC < 2.70 IOH = –2.1mA 1.95 1.87 3.00 ≤ VCC < 3.60 IOH = –2.6mA 2.61 0.90 IOL = 20µA Power Off Leakage Current ICC Quiescent Supply Current V 2.55 0.1 0.1 1.10 ≤ VCC ≤ 1.30 0.1 0.1 0.1 0.1 1.65 ≤ VCC ≤ 1.95 0.1 0.1 2.30 ≤ VCC < 2.70 0.1 0.1 0.1 0.1 1.10 ≤ VCC ≤ 1.30 IOL = 0.5mA 0.30 x VCC 0.30 x VCC 1.40 ≤ VCC ≤ 1.60 IOL = 1.0mA 0.31 0.37 1.65 ≤ VCC ≤ 1.95 IOL = 1.5mA 0.31 0.35 2.30 ≤ VCC < 2.70 IOL = 2.1mA 0.31 0.33 V 3.00 ≤ VCC < 3.60 IOL = 2.6mA 0.31 0.33 0.90 to 3.60 0 ≤ VI ≤ 3.6V ±0.1 ±0.5 µA 0 ≤ (VI, VO) ≤ 3.6V 0.5 0.5 µA VI = VCC or GND 0.9 0.9 µA Input Leakage Current IOFF V V 1.40 ≤ VCC ≤ 1.60 3.00 ≤ VCC ≤ 3.60 IIN TA = –40°C to +85°C ©2005 Fairchild Semiconductor Corporation NC7NP14 Rev. 1.0.0 0 0.90 to 3.60 www.fairchildsemi.com 4 NC7NP14 — TinyLogic® ULP Triple Inverter with Schmitt Trigger Input DC Electrical Characteristics TA = +25°C Symbol Parameter tPHL, tPLH Propagation Delay VCC (V) Conditions 0.90 CL = 10pF, RL = 1MΩ Min. Typ. Max. TA = –40°C to +85°C Min. Figure Max. Units Number 66.0 1.10 ≤ VCC ≤ 1.30 3.5 24.0 34.5 3.0 41.6 1.40 ≤ VCC ≤ 1.60 2.5 7.0 14.8 2.0 15.0 1.65 ≤ VCC ≤ 1.95 2.0 6.0 12.0 1.5 12.2 2.30 ≤ VCC < 2.70 1.5 5.0 9.4 1.0 9.9 4.0 8.3 1.0 9.0 3.00 ≤ VCC ≤ 3.60 0.90 1.0 CL = 15pF, RL = 1MΩ 71.0 1.10 ≤ VCC ≤ 1.30 4.0 28.0 37.3 3.5 46.3 1.40 ≤ VCC ≤ 1.60 3.0 8.0 15.5 2.5 16.5 1.65 ≤ VCC ≤ 1.95 2.5 6.0 12.6 2.0 13.6 2.30 ≤ VCC < 2.70 2.0 5.0 9.9 1.5 10.8 4.0 8.7 1.0 9.5 3.00 ≤ VCC ≤ 3.60 0.90 1.5 CL = 30pF, RL = 1MΩ 76.0 1.10 ≤ VCC ≤ 1.30 5.0 31.0 39.3 4.0 49.7 1.40 ≤ VCC ≤ 1.60 4.0 9.0 17.8 3.5 18.2 1.65 ≤ VCC ≤ 1.95 3.0 7.0 14.4 2.0 15.9 2.30 ≤ VCC < 2.70 2.0 6.0 11.3 1.5 12.8 3.00 ≤ VCC ≤ 3.60 1.5 5.0 9.2 1.0 10.7 CIN Input Capacitance 0 CPD Power Dissipation Capacitance 0.90 to 3.60 ©2005 Fairchild Semiconductor Corporation NC7NP14 Rev. 1.0.0 VI = 0V or VCC, f = 10MHz ns Figure 1 Figure 2 ns Figure 1 Figure 2 ns Figure 1 Figure 2 2.0 pF 8.0 pF www.fairchildsemi.com 5 NC7NP14 — TinyLogic® ULP Triple Inverter with Schmitt Trigger Input AC Electrical Characteristics tFALL = 3ns tRISE = 3ns VCC 90% Input GND 50% 10% 10% tW VCC TEST SIGNAL 90% 50% tPLH tPHL DUT VOH RL Ω CL pF Output 50% 50% VOL Figure 1. AC Test Circuit Figure 2. AC Waveforms VCC Symbol 3.3V ± 0.3V 2.5V ± 0.2V 1.8V ± 0.15V 1.5V ± 0.1V 1.2V ± 0.1V 0.9V Vmi 1.5V VCC / 2 VCC / 2 VCC / 2 VCC / 2 VCC / 2 Vmo 1.5V VCC / 2 VCC / 2 VCC / 2 VCC / 2 VCC / 2 ©2005 Fairchild Semiconductor Corporation NC7NP14 Rev. 1.0.0 www.fairchildsemi.com 6 NC7NP14 — TinyLogic® ULP Triple Inverter with Schmitt Trigger Input AC Loading and Waveforms Tape Format for US8 Package Designator Tape Section Number of Cavities Cavity Status Cover Tape Status K8X Leader (Start End) 125 (typ.) Empty Sealed Carrier 3000 Filled Sealed Trailer (Hub End) 75 (typ.) Empty Sealed Tape Dimensions inches (millimeters) Tape Format for MicroPak Package Designator Tape Section Number of Cavities Cavity Status Cover Tape Status L8X Leader (Start End) 125 (typ.) Empty Sealed Carrier 3000 Filled Sealed Trailer (Hub End) 75 (typ.) Empty Sealed Tape Dimensions inches (millimeters) ©2005 Fairchild Semiconductor Corporation NC7NP14 Rev. 1.0.0 www.fairchildsemi.com 7 NC7NP14 — TinyLogic® ULP Triple Inverter with Schmitt Trigger Input Tape and Reel Specifications Reel Dimensions inches (millimeters) Tape Size 8mm A B 7.0 (177.8) 0.059 (1.50) ©2005 Fairchild Semiconductor Corporation NC7NP14 Rev. 1.0.0 C D N 0.512 0.795 2.165 (13.00) (20.20) (55.00) W1 W2 W3 0.331 +0.059/–0.000 (8.40 +1.50/–0.00) 0.567 (14.40) W1 +0.078/–0.039 (W1 +2.00/–1.00) www.fairchildsemi.com 8 NC7NP14 — TinyLogic® ULP Triple Inverter with Schmitt Trigger Input Tape and Reel Specifications (Continued) 8 5 0.70 -B- 2.3±0.1 3.1±.1 2.70 0.15 3.40 -A- 1.80 1.00 1.55 0.30 TYP 1 0.2 C B A ALL LEAD TIPS 4 PIN #1 IDENT. ALL LEAD TIPS 0.1 C 0.90 MAX 0.5 TYP DETAIL A 0.70±0.10 0.10-0.18 -C0.10 0.00 0.17-0.27 0.13 0.50TYP A B C 0.4 TYP GAGE PLANE 0.12 0°-8° A. CONFORMS TO JEDEC REGISTRATION MO-187 B. DIMENSIONS ARE IN MILLIMETERS. C. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH, AND TIE BAR EXTRUSIONS. SEATING PLANE DETAIL A D. DIMENSIONS AND TOLERANCES PER ANSI Y14.5M, 1982. MAB08AREVC Figure 3. 8-Lead US8, JEDEC MO-187, Variation CA 3.1mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ ©2005 Fairchild Semiconductor Corporation NC7NP14 Rev. 1.0.0 www.fairchildsemi.com 9 NC7NP14 — TinyLogic® ULP Triple Inverter with Schmitt Trigger Input Physical Dimensions NC7NP14 — TinyLogic® ULP Triple Inverter with Schmitt Trigger Input Physical Dimensions (Continued) Figure 4. 8-Lead MicroPak, 1.6mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ ©2005 Fairchild Semiconductor Corporation NC7NP14 Rev. 1.0.0 www.fairchildsemi.com 10 Build it Now™ CorePLUS™ CorePOWER™ CROSSVOLT™ CTL™ Current Transfer Logic™ EcoSPARK® EfficentMax™ EZSWITCH™ * ™ ® Fairchild® Fairchild Semiconductor® FACT Quiet Series™ ® FACT ® FAST FastvCore™ FlashWriter® * FPS™ F-PFS™ ® FRFET SM Global Power Resource Green FPS™ Green FPS™ e-Series™ GTO™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroFET™ MicroPak™ MillerDrive™ MotionMax™ Motion-SPM™ OPTOLOGIC® ® OPTOPLANAR ® PowerTrench® Programmable Active Droop™ QFET® QS™ Quiet Series™ RapidConfigure™ ™ Saving our world, 1mW/W/kW at a time™ SmartMax™ SMART START™ SPM® STEALTH™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SupreMOS™ SyncFET™ PDP SPM™ Power-SPM™ ® The Power Franchise TinyBoost™ TinyBuck™ TinyLogic® TINYOPTO™ TinyPower™ TinyPWM™ TinyWire™ µSerDes™ UHC® Ultra FRFET™ UniFET™ VCX™ VisualMax™ ® * EZSWITCH™ and FlashWriter® are trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I36 ©2005 Fairchild Semiconductor Corporation NC7NP14 Rev. 1.0.0 www.fairchildsemi.com 11 NC7NP14 — TinyLogic® ULP Triple Inverter with Schmitt Trigger Input TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks.