ONSEMI NCP4629HDT060T5G

NCP4629
500 mA, Wide Input Range,
LDO Linear Voltage
Regulator
The NCP4629 is a CMOS 500 mA LDO linear voltage regulator
which features a high input voltage range while maintaining a low
quiescent current. Several protection features like current limiting and
thermal shutdown are fully integrated to create a versatile and robust
device. A high maximum input voltage (36 V) and wide temperature
range (−40°C to 105°C) makes the NCP4629 an ideal choice for high
power industrial applications.
http://onsemi.com
MARKING
DIAGRAMS
Features
•
•
•
•
•
•
•
•
•
Operating Input Voltage Range: 4 V to 24 V
Output Voltage Range: 3.0 to 12.0 V (available in 0.1 V steps)
±2% Output Voltage Accuracy
Output Current: min. 500 mA (VIN = VOUT + 1 V)
Line Regulation: 0.05%/V
Current Limit Circuit
Thermal Shutdown Circuit
Available in SOT−89−5 and DPACK5 Package
These are Pb−Free Devices
XXXXXXXX
XX
MM
DPAK−5
CASE 369AE
1
1
XXX
XMM
SOT−89 5
CASE 528AB
Typical Applications
•
•
•
•
•
Home appliances, industrial equipment
Cable boxes, satellite receivers, entertainment systems
Car audio equipment, navigation systems
Notebook adaptors, LCD TVs, cordless phones and private LAN
systems
Office equipment: copiers, printers, facsimiles, scanners, projectors,
monitors
NCP4629x
VIN
VIN
C1
470 n
CE
VOUT
VOUT
GND
XX, XXX= Specific Device Code
M, MM = Date Code
A
= Assembly Location
Y
= Year
W
= Work Week
G
= Pb−Free Package
(*Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 13 of this data sheet.
C2
10m
Figure 1. Typical Application Schematic
© Semiconductor Components Industries, LLC, 2011
June, 2011 − Rev. 0
1
Publication Order Number:
NCP4629/D
NCP4629
VIN
VOUT
Vref
Current Limit
Short Protection
Thermal Shutdown
CE
GND
Figure 2. Simplified Schematic Block Diagram
PIN FUNCTION DESCRIPTION
Pin No.
SOT89
Pin No.
DPACK
Pin Name
1
1
VIN
Input pin
2
2
GND
Ground pin, all ground pins must be connected together when it is
mounted on board
3
3
GND
Ground pin, all ground pins must be connected together when it is
mounted on board
4
4
CE
5
5
VOUT
Description
Chip enable pin (“H” active)
Output pin
ABSOLUTE MAXIMUM RATINGS
Rating
Symbol
Value
Unit
VIN
−0.3 to 36
V
Output Voltage
VOUT
−0.3 to VIN ≤ 36
V
Chip Enable Input
VCE
−0.3 to VIN ≤ 36
V
Power Dissipation SOT−89
PD
900
mW
Input Voltage
Power Dissipation DPACK
1900
Junction Temperature
TJ
−40 to 150
°C
Storage Temperature
TSTG
−55 to 125
°C
ESD Capability, Human Body Model (Note 2)
ESDHBM
2000
V
ESD Capability, Machine Model (Note 2)
ESDMM
200
V
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. Duration time = 200 ms
2. This device series incorporates ESD protection and is tested by the following methods:
ESD Human Body Model tested per AEC−Q100−002 (EIA/JESD22−A114)
ESD Machine Model tested per AEC−Q100−003 (EIA/JESD22−A115)
Latch−up Current Maximum Rating tested per JEDEC standard: JESD78.
http://onsemi.com
2
NCP4629
THERMAL CHARACTERISTICS
Rating
Symbol
Value
Thermal Characteristics, SOT−89
Thermal Resistance, Junction−to−Air
RqJA
111
Thermal Characteristics, DPACK
Thermal Resistance, Junction−to−Air
RqJA
53
Unit
°C/W
°C/W
ELECTRICAL CHARACTERISTICS TA = 25°C
Parameter
Test Conditions
Operating Input Voltage
Output Voltage
Output Voltage Temp.
Coefficient
VIN = VOUT + 1 V, IOUT = 100 mA
Symbol
Min
Max
Unit
VIN
4
Typ
24
V
VOUT
x0.98
x1.02
V
ppm/°C
±100
VIN = VOUT + 2 V, IOUT = 100 mA, TA = −40 to
105°C
Line Regulation
VIN = VOUT + 1 V to 24 V, IOUT = 10 mA
LineReg
0.05
0.10
%/V
Load Regulation
VIN = VOUT + 2 V, IOUT = 0.1 mA to 200 mA
LoadReg
25
60
mV
VDO
0.135
0.225
V
5.0 V ≤ VOUT < 9.0 V
0.115
0.180
8.0 V ≤ VOUT ≤ 12.0 V
0.095
0.155
Dropout Voltage
Output Current
IOUT = 200 mA
3.0 V ≤ VOUT < 5.0 V
VIN = VOUT + 1 V
IOUT
Short Current Limit
VOUT = 0 V
ISC
500
65
mA
Quiescent Current
VIN = VOUT + 1 V, VIN = VCE
IQ
70
130
mA
Standby Current
VIN = 24 V, VCE = 0 V
ISTB
0.1
1
mA
CE Pin Threshold Voltage
CE Input Voltage “H”
VCEH
2.0
VIN
V
CE Input Voltage “L”
VCEL
0
0.4
mA
Thermal Shutdown Temperature
TSD
160
°C
Thermal Shutdown Release
Temperature
TSR
135
°C
PSRR
60
dB
Power Supply Rejection Ratio
Output Noise Voltage
VIN = VOUT + 2.0 V,
ΔVIN_PK−PK = 0.5 V,
IOUT = 100 mA, f =
1 kHz
VOUT ≤ 6.0 V
VOUT > 6.0 V
VOUT = TBD V, IOUT = TBD mA, f = 10 Hz to
100 kHz
http://onsemi.com
3
50
VN
TBD
mVrms
NCP4629
TYPICAL CHARACTERISTICS
6
7
VOUT, OUTPUT VOLTAGE (V)
VOUT, OUTPUT VOLTAGE (V)
9.0 V
5
VIN = 5.5 V
4
6.0 V
7.0 V
3
2
1
0
200
400
600
800
8.0 V
3
10 V
2
1
0
200
400
600
800
1000
1200
IOUT, OUTPUT CURRENT (mA)
IOUT, OUTPUT CURRENT (mA)
Figure 3. Output Voltage vs. Output Current,
VOUT = 5 V
Figure 4. Output Voltage vs. Output Current,
VOUT = 6 V
6
VOUT, OUTPUT VOLTAGE (V)
12
VIN = 12.5 V
10
13 V
8
15 V
6
16 V
4
2
0
200
400
600
800
5
4
IOUT = 0.1 mA
3
0
1
2
3
4
5
6
7
8
9
IOUT, OUTPUT CURRENT (mA)
VIN, INPUT VOLTAGE (V)
Figure 5. Output Voltage vs. Output Current,
VOUT = 12 V
Figure 6. Output Voltage vs. Input Voltage,
VOUT = 5 V
14
6
12
5
IOUT = 0.1 mA
3
2
100 mA
1
500 mA
0
500 mA
1
7
4
100 mA
2
0
1000
VOUT, OUTPUT VOLTAGE (V)
VOUT, OUTPUT VOLTAGE (V)
VOUT, OUTPUT VOLTAGE (V)
7.0 V
4
1000
14
0
VIN = 6.5 V
5
0
0
0
6
1
2
3
4
5
6
7
8
9
10
8
IOUT = 0.1 mA
6
100 mA
4
2
0
10
500 mA
0
3
6
9
12
VIN, INPUT VOLTAGE (V)
VIN, INPUT VOLTAGE (V)
Figure 7. Output Voltage vs. Input Voltage,
VOUT = 6 V
Figure 8. Output Voltage vs. Input Voltage,
VOUT = 12 V
http://onsemi.com
4
10
15
NCP4629
TYPICAL CHARACTERISTICS
6.1
VOUT, OUTPUT VOLTAGE (V)
VOUT, OUTPUT VOLTAGE (V)
5.1
5.05
5
4.95
4.9
−40
−20
0
20
40
60
80
100
6
5.95
5.9
−40
120
−20
0
40
60
80
100
TEMPERATURE (°C)
TEMPERATURE (°C)
Figure 10. Output Voltage vs. Temperature,
VOUT = 6 V
120
80
SUPPLY CURRENT (mA)
70
12.05
12
11.95
60
50
40
30
20
10
11.9
−40
−20
0
20
40
60
80
100
0
120
0
1
2
3
TEMPERATURE (°C)
5
6
7
8
9
10
Figure 12. Supply Current vs. Input Voltage,
VOUT = 5 V
80
70
70
SUPPLY CURRENT (mA)
80
60
50
40
30
20
60
50
40
30
20
10
10
0
4
VIN, INPUT VOLTAGE (V)
Figure 11. Output Voltage vs. Temperature,
VOUT = 12 V
SUPPLY CURRENT (mA)
20
Figure 9. Output Voltage vs. Temperature,
VOUT = 5 V
12.1
VOUT, OUTPUT VOLTAGE (V)
6.05
0
2
4
6
8
10
0
12
0
VIN, INPUT VOLTAGE (V)
2
4
6
8
10
VIN, INPUT VOLTAGE (V)
Figure 13. Supply Current vs. Input Voltage,
VOUT = 6 V
12
14
Figure 14. Supply Current vs. Input Voltage,
VOUT = 12 V
http://onsemi.com
5
16
NCP4629
0.4
0.4
0.35
0.35
0.3
25°C
0.25
TA = 110°C
0.2
0.15
−40°C
0.1
DROPOUT VOLTAGE (V)
DROPOUT VOLTAGE (V)
TYPICAL CHARACTERISTICS
0.25
0.2
0.15
−40°C
0.1
0
100
200
300
400
500
0
0
200
300
400
500
Figure 16. Dropout Voltage vs. Input Current,
VOUT = 6 V
0.4
120
0.35
100
0.3
80
TA = 110°C
0.25
0.2
PSRR (dB)
DROPOUT VOLTAGE (V)
100
IOUT, OUTPUT CURRENT (mA)
IOUT, OUTPUT CURRENT (mA)
Figure 15. Dropout Voltage vs. Input Current,
VOUT = 5 V
25°C
0.15
0.1
−40°C
0
0
100
200
IOUT = 1 mA
60
40
100 mA
20
0.05
300
400
500
300 mA
0
0.1
IOUT, OUTPUT CURRENT (mA)
100
100
80
80
IOUT = 1 mA
100 mA
20
0
PSRR (dB)
120
40
1.0
10.0
60
100.0
1000
IOUT = 1 mA
40
100 mA
20
300 mA
0.1
10.0
Figure 18. Ripple Rejection vs. Frequency,
VOUT = 5 V
120
60
1.0
FREQUENCY (kHz)
Figure 17. Dropout Voltage vs. Input Current,
VOUT = 12 V
PSRR (dB)
25°C
TA = 110°C
0.05
0.05
0
0.3
100.0
1000
0
300 mA
0.1
1.0
10.0
100.0
FREQUENCY (kHz)
FREQUENCY (kHz)
Figure 19. Ripple Rejection vs. Frequency,
VOUT = 6 V
Figure 20. Ripple Rejection vs. Frequency,
VOUT = 12 V
http://onsemi.com
6
1000
NCP4629
TYPICAL CHARACTERISTICS
12
VN, NOISE DENSITY (mVrms/√Hz)
7
6
5
4
3
2
1
0.1
1
10
100
10
8
6
4
2
0
0.01
1000
0.1
1
10
100
FREQUENCY (kHz)
FREQUENCY (kHz)
Figure 21. Output Noise Density, VOUT = 5 V
Figure 22. Output Noise Density, VOUT = 6 V
30
VN, NOISE DENSITY (mVrms/√Hz)
25
20
15
10
5
0
0.01
0.1
1
10
FREQUENCY (kHz)
100
1000
Figure 23. Output Noise Density, VOUT = 12 V
750
500
250
0
5.10
IOUT (mA)
0
0.01
VOUT (V)
VN, NOISE DENSITY (mVrms/√Hz)
8
5.05
5.00
4.95
4.90
4.85
4.80
0.0
0.2
0.4
0.6
0.8
1.0 1.2
t (ms)
1.4
1.6
1.8
Figure 24. Load Transient Response at Output
Current Step 1 mA to 500 mA, VOUT = 5 V
http://onsemi.com
7
2.0
1000
NCP4629
TYPICAL CHARACTERISTICS
750
500
250
IOUT (mA)
VOUT (V)
0
6.10
6.05
6.00
5.95
5.90
5.85
5.80
0.0
0.2
0.4
0.6
0.8
1.0 1.2
t (ms)
1.4
1.6
1.8
2.0
Figure 25. Load Transient Response at Output
Current Step 1 mA to 500 mA, VOUT = 6 V
750
500
250
12.10
IOUT (mA)
VOUT (V)
0
12.05
12.00
11.95
11.90
11.85
11.80
0.0
0.2
0.4
0.6
0.8
1.0 1.2
t (ms)
1.4
1.6
1.8
2.0
Figure 26. Load Transient Response at Output
Current Step 1 mA to 500 mA, VOUT = 12 V
150
100
50
IOUT (mA)
VOUT (V)
0
5.02
5.01
5.00
4.99
4.98
4.97
0
40
80
120 160 200 240 280 320 360 400
t (ms)
Figure 27. Load Transient Response at Output
Current Step 50 mA to 100 mA, VOUT = 5 V
http://onsemi.com
8
NCP4629
TYPICAL CHARACTERISTICS
150
100
50
IOUT (mA)
VOUT (V)
0
6.02
6.01
6.00
5.99
5.98
5.97
0
40
80
120 160 200 240 280 320 360 400
t (ms)
Figure 28. Load Transient Response at Output
Current Step 50 mA to 100 mA, VOUT = 6 V
150
100
50
IOUT (mA)
VOUT (V)
0
12.02
12.01
12.00
11.99
11.98
11.97
0
40
80
120 160 200 240 280 320 360 400
t (ms)
Figure 29. Load Transient Response at Output
Current Step 50 mA to 100 mA, VOUT = 12 V
9
8
7
VIN (V)
VOUT (V)
6
5.06
5.04
5.02
5.00
4.98
4.96
4.94
0
20
40
60
80
100 120 140 160 180 200
t (ms)
Figure 30. Line Transient Response, VOUT = 5 V
http://onsemi.com
9
NCP4629
TYPICAL CHARACTERISTICS
10
9
8
VIN (V)
VOUT (V)
7
6.06
6.04
6.02
6.00
5.98
5.96
5.94
0
20
40
60
80
100 120 140 160 180 200
t (ms)
Figure 31. Line Transient Response, VOUT = 6 V
16
15
14
VIN (V)
12.04
12.02
12.00
11.98
11.96
11.94
0
20
40
60
80
100 120 140 160 180 200
t (ms)
Figure 32. Line Transient Response,
VOUT = 12 V
9
Chip Enable
6
3
5
IOUT = 1 mA
4
IOUT = 100 mA
3
2
IOUT = 500 mA
1
0
−1
0
40
80
120 160 200 240 280 320 360 400
t (ms)
Figure 33. Turn−on Behavior with CE,
VOUT = 5 V
http://onsemi.com
10
VCE (V)
0
VOUT (V)
VOUT (V)
13
12.06
NCP4629
TYPICAL CHARACTERISTICS
10.5
Chip Enable
7.0
3.5
VCE (V)
VOUT (V)
0.0
10
8
6
IOUT = 1 mA
IOUT = 100 mA
4
2
IOUT = 500 mA
0
−2
0
40
80
120 160 200 240 280 320 360 400
t (ms)
Figure 34. Turn−on Behavior with CE,
VOUT = 6 V
19.5
Chip Enable
13
10
0
IOUT = 1 mA
IOUT = 100 mA
8
6
VCE (V)
VOUT (V)
6.5
IOUT = 500 mA
4
2
0
−2
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
t (ms)
Figure 35. Turn−on Behavior with CE,
VOUT = 12 V
9
6
3
Chip Enable
4
VCE (V)
VOUT (V)
0
5
IOUT = 1 mA
3
2
IOUT = 100 mA
1
0
−1
IOUT = 500 mA
0
1
2
3
4
5
t (ms)
6
7
8
Figure 36. Turn−off Behavior with CE,
VOUT = 5 V
http://onsemi.com
11
9
10
NCP4629
TYPICAL CHARACTERISTICS
10.5
7.0
3.5
0.0
VCE (V)
VOUT (V)
Chip Enable
6
IOUT = 1 mA
4
2
0
−2
IOUT = 100 mA
IOUT = 500 mA
0
2
4
6
8
10
12
14
16
18
20
t (ms)
Figure 37. Turn−off Behavior with CE,
VOUT = 6 V
19.5
13.0
6.5
Chip Enable
VCE (V)
VOUT (V)
0
12
9
IOUT = 1 mA
6
3
0
−3
IOUT = 100 mA
IOUT = 500 mA
0
4
8
12
16
20
24
28
32
t (ms)
Figure 38. Turn−off Behavior with CE,
VOUT = 12 V
http://onsemi.com
12
36
40
NCP4629
APPLICATION INFORMATION
Output Decoupling Capacitor (C2)
A typical application circuit for NCP4629 series is shown
in Figure 39.
NCP4629x
VIN
VIN
C1
470 n
A 10 mF ceramic output decoupling capacitor is sufficient
to achieve stable operation of the IC. If tantalum capacitor
is used, and its ESR is high, the loop oscillation may result.
The capacitor should be connected as close as possible to the
output and ground pin. Larger values and lower ESR
improves dynamic parameters.
VOUT
VOUT
C2
10 m
CE
GND
Enable Operation
The enable pin CE may be used for turning the regulator
on and off. The IC is switched on when a high level voltage
is applied to the CE pin. The enable pin has an internal pull
down current source. If the enable function is not needed
connect CE pin to VIN.
Figure 39. Typical Application Schematic
When VOUT voltage could be higher than VIN voltage it
is necessary to use protective diode D1. If there is possibility
that VOUT voltage could be negative then it is necessary to
use schottky diode D2. See Figure 40 for details. Do not
force the voltage to the VOUT pin.
Thermal
As a power across the IC increase, it might become
necessary to provide some thermal relief. The maximum
power dissipation supported by the device is dependent
upon board design and layout. Mounting pad configuration
on the PCB, the board material, and also the ambient
temperature affect the rate of temperature increase for the
part. When the device has good thermal conductivity
through the PCB the junction temperature will be relatively
low in high power dissipation applications.
The IC includes internal thermal shutdown circuit that
stops operation of regulator, if junction temperature is
higher than 160°C. After that, when junction temperature
decreases below 135°C, the operation of voltage regulator
would restart. While high power dissipation condition is, the
regulator starts and stops repeatedly and protects itself
against overheating.
D1
NCP4629x
VIN
VIN
C1
470 n
CE
VOUT
VOUT
C2
10 m
GND
D2
Figure 40. Typical Application Schematic with
Protective Diodes
PCB layout
Pins number 2 and 3 must be wired to the GND plane
while it is mounted on board. Make VIN and GND lines
sufficient. If their impedance is high, noise pickup or
unstable operation may result. Connect capacitors C1 and
C2 as close as possible to the IC, and make wiring as short
as possible.
Input Decoupling Capacitor (C1)
A 470 nF ceramic input decoupling capacitor should be
connected as close as possible to the input and ground pin of
the NCP4629. Higher values and lower ESR improves line
transient response.
ORDERING INFORMATION
Nominal Output
Voltage
Description
Marking
Package
Shipping†
NCP4629HDT050T5G
5.0 V
Enable High
C1J050B
DPACK−5
(Pb−Free)
3000 / Tape & Reel
NCP4629HDT060T5G
6.0 V
Enable High
C1J060B
DPACK−5
(Pb−Free)
3000 / Tape & Reel
NCP4629HDT120T5G
12.0 V
Enable High
C1J120B
DPACK−5
(Pb−Free)
3000 / Tape & Reel
Device
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*To order other package and voltage variants, please contact your ON Semiconductor sales representative.
http://onsemi.com
13
NCP4629
PACKAGE DIMENSIONS
DPAK−5 (TO−252, 5 LEAD)
CASE 369AE−01
ISSUE O
C
A
E
b2
A
B
c2
L3
Z
D
H
DETAIL A
1
2 3
4
E2
5
c
e
SIDE VIEW
C A B
b
TOP VIEW
0.12
M
BOTTOM VIEW
H
C
L2
GUAGE
PLANE
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME
Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. THERMAL PAD CONTOUR OPTIONAL, WITHIN
DIMENSIONS b3, E2, L3 AND Z.
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD
FLASH, PROTRUSIONS OR BURRS. MOLD
FLASH, PROTRUSIONS OR GATE BURRS SHALL
NOT EXCEED 0.15mm PER SIDE. THESE
DIMENSIONS TO BE MEASURED AT DATUM H.
5. DIMENSIONS D AND E ARE DETERMINED AT THE
OUTERMOST EXTREMES OF THE PLASTIC BODY.
6. DATUMS A AND B ARE DETERMINED AT DATUM
PLANE H.
DIM
A
A1
b
b2
c
c2
D
E
E2
e
H
L
L1
L2
L3
Z
0.10 C
L
A1
L1
DETAIL A
RECOMMENDED
SOLDERING FOOTPRINT*
5.70
6.00
10.50
5X
2.10
5X
1.27
PITCH
0.80
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
http://onsemi.com
14
MILLIMETERS
MIN
MAX
2.10
2.50
0.00
0.13
0.40
0.60
5.14
5.54
0.40
0.60
0.40
0.60
5.90
6.30
6.40
6.80
5.04 REF
1.27 BSC
9.60
10.20
1.39
1.78
2.50
2.90
0.51 BSC
0.90
1.30
2.74 REF
NCP4629
PACKAGE DIMENSIONS
SOT−89, 5 LEAD
CASE 528AB−01
ISSUE O
D
E
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME
Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. LEAD THICKNESS INCLUDES LEAD FINISH.
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD
FLASH, PROTRUSIONS, OR GATE BURRS.
5. DIMENSIONS L, L2, L3, L4, L5, AND H ARE MEASURED AT DATUM PLANE C.
H
DIM
A
b
b1
c
D
D2
E
e
H
L
L2
L3
L4
L5
1
TOP VIEW
c
A
0.10 C
C
SIDE VIEW
e
b1
L
1
e
b
2
L3
L4
RECOMMENDED
MOUNTING FOOTPRINT*
L2
4X
3
0.57
1.75
L5
5
MILLIMETERS
MIN
MAX
1.40
1.60
0.32
0.52
0.37
0.57
0.30
0.50
4.40
4.60
1.40
1.80
2.40
2.60
1.40
1.60
4.25
4.45
1.10
1.50
0.80
1.20
0.95
1.35
0.65
1.05
0.20
0.60
4
2.79
1.50
0.45
4.65
D2
BOTTOM VIEW
1.30
1.65
1
2X
2X
0.62
1.50
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
http://onsemi.com
15
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NCP4629/D