NJU6397 Series PRELIMINARY 3rd. Over Tone Quartz Crystal Oscillator for 135MHz ■GENERAL DESCRIPTION The NJU6397 series that is a C-MOS IC for quartz crystal oscillator consists of an oscillation amplifier and 3-state output buffer. This series has three types of A, B and C. The frequency range of the A type is from 75 to 90MHz, and the B type is from 90 to 110MHz, and the C type is from 110 to 135MHz. The oscillation amplifier realizes very low oscillation stop current with NAND circuit. The 3-state output buffer is C-MOS compatible. ■PACKAGE OUTLINE ■ FEATURES ●Operating Voltage ●Maximum Oscillation Frequency ●High Fan-out ■PAD LOCATION NJU6397XC-D 2.3 to 3.6V (See Line-up Table) IOH/IOL= 6mA @VDD=2.5V IOH/IOL= 8mA @VDD=3.3V ●Oscillation Stop and Output Stand-by Function ●3-State Output Buffer ●Oscillation Capacitors Cg and Cg on-chip ●Package Outline Thin-Chip ●C-MOS Technology ■LINE-UP TABLE Type No. NJU6397 A B C Thin-Chip CONT XT XT VSS VDD FOUT ■COORDINATES Recommended Oscillation Frequency 75 to 90MHz 90 to 110MHz 110 to 135MHz Output Frequency Cg/Cd f0 11/12pF 9/10pF 8/9pF No 1 Pad Name CONT X -178 Y 231 2 3 XT XT -178 -178 77 -77 4 5 8 VSS FOUT VDD -178 206 206 -231 -231 231 Starting Point:Chip Center Unit[um] Chip Size:0.7x0.75mm Thin-Chip Thickness:200±20um Pad Size:90x90um ■BLOCK DIAGRAM VDD XT VSS Rf XT Cg Cd 3 − STATE BUFFER FOUT CONT 2002/07/15 ( 1 / 5 ) NJU6397 Series ■TREMINAL DESCRIPTION SYMBOL FUNCTION Oscillation and 3-state Output Buffer Control FOUT CONT CONT H or OPEN Output frequency f0 L Oscillation Stop and High impedance Output XT XT VSS FOUT VDD Quartz Crystal Connecting Terminals VSS=0V Frequency Output VDD=2.5V/3.3V ■ABSOLUTE MAXIMUM RATINGS (Ta=25°C) PARAMETER SYMBOL RATING UNIT Supply Voltage VDD -0.5 to +7.0 V Input Voltage VIN VSS-0.5 to VDD+0.5 V Output Voltage VO -0.5 to VDD+0.5 V Input Current IIN mA ±10 Output Current IO mA ±25 Operating Temperature Range Topr -40 to +85 °C Storage Temperature Range Tstg -55 to +125 °C Note1) If the supply voltage(VDD) is less than 7.0V, the input voltage do not over the VDD level. Note2) Decupling capacitor should be connected between VDD and VSS due to the stabilized operation for the circuit. 2002/07/15 ( 2 / 5 ) NJU6397 Series ■ELECTRICAL CHARACTERISTICS PARAMETER Operating Voltage PARAMETER Operating Current Oscillation Stopping Current Stand-by Current Input Voltage Output Current SYMBOL VDD SYMBOL IDD1 IDD2 Ist VIH VIL IOH IOL Input Current IIN 3-state Off Leakage Current IOZ Feedback Resistance Rf Internal Capacitor Maximum Oscillation Frequency Cg/Cd FMAX CONDITIONS MIN 2.3 CONDITIONS A type, fosc=90MHz, CL=15pF B type, fosc=110MHz, CL=15pF C type, fosc=135MHz, CL=15pF CONT=VSS, No load CONT=XT=VSS, No load Output Signal SYM CL=15pF, @VDD/2 Symmetry Output Signal Rise tr CL=15pF, 10% to 90% Time Output Signal Fall tf CL=15pF, 90% to 10% Time Output Disable time TPLZ CL=15pF, RUP=10kΩ Output Enable Time TPZL CL=15pF, RUP=10kΩ Note3) Excluding input current on CONT Terminal. MAX 3.6 2 2.0 0 6 6 7.5 1.2 5 uA 1 3.5 0.5 12.0 2.0 uA V V mA mA uA uA ±0.1 uA 3.8 3.8 2.9 11/12 9/10 8/9 kΩ pF 90 110 135 45 (Ta=25°C) UNIT V (VDD=2.5V,Ta=25°C) TYP MAX UNIT 10 20 mA 10 20 15 30 Note3) VOH=2.2V VOL=0.3V CONT=0.8VDD CONT=0.2VDD CONT=VSS, FOUT= VDD or VSS A type B type C type A type, fosc=90MHz B type, fosc=110MHz C type, fosc=135MHz A type B type C type MIN TYP MHz 50 55 % 3 4 ns 3 4 ns 200 200 ns ns 2002/07/15 ( 3 / 5 ) NJU6397 Series PARAMETER Operating Current Oscillation Stopping Current Stand-by Current Input Voltage Output Current SYMBOL IDD1 IDD2 Ist VIH VIL IOH IOL Input Current IIN 3-state Off Leakage Current IOZ Feedback Resistance Rf Internal Capacitor Maximum Oscillation Frequency Cg/Cd FMAX CONDITIONS A type, fosc=90MHz, CL=15pF B type, fosc=110MHz, CL=15pF C type, fosc=135MHz, CL=15pF CONT=VSS, No load CONT=XT=VSS, No load Output Signal SYM CL=15pF, @VDD/2 Symmetry Output Signal Rise tr CL=15pF, 10% to 90% Time Output Signal Fall tf CL=15pF, 90% to 10% Time Output Disable time TPLZ CL=15pF, RUP=10kΩ Output Enable Time TPZL CL=15pF, RUP=10kΩ Note3) Excluding input current on CONT Terminal. TYP 13 13 18 (VDD=3.3V,Ta=25°C) MAX UNIT 25 mA 25 35 Note3) VOH=2.97V VOL=0.33V CONT=0.8VDD CONT=0.2VDD CONT=VSS, FOUT= VDD or VSS A type B type C type A type, fosc=90MHz B type, fosc=110MHz C type, fosc=135MHz A type B type C type MIN 2.3 0 8 8 10.0 1.8 10 uA 1 3.3 1.0 15.0 3.0 uA V V mA mA uA uA ±0.1 uA 3.8 3.8 2.9 11/12 9/10 8/9 kΩ pF 90 110 135 45 MHz 50 55 % 2 3 ns 2 3 ns 150 150 ns ns 2002/07/15 ( 4 / 5 ) NJU6397 Series ■MEASURMENT CIRCUITS (1)Output Signal Symmetry(CL=15pF) VDD 1000pF Pulse Generator 1/2VDD FOUT XT 50Ω CL=15pF H VSS L (2)Output Signal Rise/Fall Time(CL=15pF) 90% VDD 1000pF Pulse Generator FOUT XT 50Ω 50% 10% CL=15pF VSS tr tf (3)Output Disable/Enable Time(CL=15pF,RUP=10kΩ) RUP=10kΩ VDD XT Pulse Generator 50Ω CONT VSS CONT FOUT 0.8VDD 0.2VDD TPLZ TPZL CL=15pF FOUT VOH VOL [CAUTION] The specifications on this data book are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this data book are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights. 2002/07/15 ( 5 / 5 )