NL27WZ17 Dual Non-Inverting Schmitt Trigger Buffer The NL27WZ17 is a high performance dual buffer operating from a 1.65 to 5.5 V supply. At VCC = 3.0 V, high impedance TTL compatible inputs significantly reduce current loading to input drivers while the TTL compatible outputs offer improved switching noise performance. http://onsemi.com Features • • • • • • • • • • Extremely High Speed: tPD 2.0 ns (typical) at VCC = 5.0 V Designed for 1.65 V to 5.5 V VCC Operation Overvoltage Tolerant Inputs LVTTL Compatible − Interface Capability with 5.0 V TTL Logic with VCC = 3.0 V (2.7−3.3) LVCMOS Compatible 24 mA Balanced Output Sink and Source Capability at VCC = 3.0 V Near Zero Static Supply Current Substantially Reduces System Power Requirements Chip Complexity: FET = 72; Equivalent Gate = 18 These Devices are Pb−Free and are RoHS Compliant NLV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable SC−88/SOT−363/SC−70−6 DF SUFFIX CASE 419B MARKING DIAGRAM 6 MX MG G 1 MX = Specific Device Code M = Date Code* G = Pb−Free Package (Note: Microdot may be in either location) *Date Code orientation may vary depending upon manufacturing location. IN A1 1 GND 6 2 IN A2 5 3 PIN ASSIGNMENT OUT Y1 VCC 4 OUT Y2 Pin Function 1 IN A1 2 GND 3 IN A2 4 OUT Y2 5 VCC 6 OUT Y1 Figure 1. Pinout (Top View) FUNCTION TABLE IN A1 IN A2 1 1 A Input OUT Y1 OUT Y2 Figure 2. Logic Symbol Y Output L L H H ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet. © Semiconductor Components Industries, LLC, 2012 April, 2012 − Rev. 9 1 Publication Order Number: NL27WZ17/D NL27WZ17 MAXIMUM RATINGS Symbol VCC Characteristics DC Supply Voltage Value Units −0.5 to +7.0 V VI DC Input Voltage −0.5 ≤ VI ≤ +7.0 V VO DC Output Voltage, Output in Z or LOW State (Note 1) −0.5 ≤ VO ≤ +7.0 V IIK DC Input Diode Current, VI < GND −50 mA IOK DC Output Diode Current, VO < GND −50 mA IO DC Output Sink Current ±50 mA ICC DC Supply Current per Supply Pin ±100 mA IGND DC Ground Current per Ground Pin ±100 mA TSTG Storage Temperature Range −65 to +150 °C PD Power Dissipation in Still Air 200 mW qJA Thermal Resistance 333 °C/W TL Lead Temperature, 1 mm from Case for 10 s 260 °C TJ Junction Temperature under Bias +150 °C VESD ESD Withstand Voltage Human Body Model (Note 2) Machine Model (Note 3) Charged Device Model (Note 4) > 2000 150 N/A ILatch−U p V Latch−Up Performance Above VCC and Below GND at 85°C (Note 5) mA ±500 Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. IO absolute maximum rating must be observed. 2. Tested to EIA/JESD22−A114−A 3. Tested to EIA/JESD22−A115−A 4. Tested to JESD22−C101−A 5. Tested to EIA/JESD78 RECOMMENDED OPERATING CONDITIONS Symbol VCC Parameter Supply Voltage Operating Data Retention Only Min Max 1.65 1.5 5.5 5.5 Units V VI Input Voltage 0 5.5 V VO Output Voltage (High or LOW State) 0 5.5 V TA Operating Free−Air Temperature −55 +125 °C Dt/DV Input Transition Rise or Fall Rate VCC = 2.5 V ±0.2 V VCC = 3.0 V ±0.3 V VCC = 5.0 V ±0.5 V 0 0 0 No Limit No Limit No Limit ns/V ORDERING INFORMATION Package Shipping† NL27WZ17DFT2G SC−88 / SOT−363 / SC−70−6 (Pb−Free) 3000 / Tape & Reel NLV27WZ17DFT2G* SC−88 / SOT−363 / SC−70−6 (Pb−Free) 3000 / Tape & Reel Device †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *NLV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable. http://onsemi.com 2 NL27WZ17 DC ELECTRICAL CHARACTERISTICS Symbol Parameter Condition TA = 255C −555C 3 TA 3 1255C VCC (V) Min Typ Max Min Max Units VT) Positive Input Threshold Voltage 1.65 2.3 2.7 3.0 4.5 5.5 0.6 1.0 1.2 1.3 1.9 2.2 1.0 1.5 1.7 1.9 2.7 3.3 1.4 1.8 2.0 2.2 3.1 3.6 0.6 1.0 1.2 1.3 1.9 2.2 1.4 1.8 2.0 2.2 3.1 3.6 V VT− Negative Input Threshold Voltage 1.65 2.3 2.7 3.0 4.5 5.5 0.2 0.4 0.5 0.6 1.0 1.2 0.5 0.75 0.87 1.0 1.5 1.9 0.8 1.15 1.4 1.5 2.0 2.3 0.2 0.4 0.5 0.6 1.0 1.2 0.8 1.15 1.4 1.5 2.0 2.3 V VH Input Hysteresis Voltage 1.65 2.3 2.7 3.0 4.5 5.5 0.1 0.25 0.3 0.4 0.6 0.7 0.48 0.75 0.83 0.93 1.2 1.4 0.9 1.1 1.15 1.2 1.5 1.7 0.1 0.25 0.3 0.4 0.6 0.7 0.9 1.1 1.15 1.2 1.5 1.7 V VCC − 0.1 1.29 1.9 2.2 2.4 2.3 3.8 VCC 1.52 2.1 2.4 2.7 2.5 4.0 VOH High−Level Output Voltage VIN = VIH or VIL IOH = −100 mA IOH = −3.0 mA IOH = *8.0 mA IOH = *12 mA IOH = *16 mA IOH = *24 mA IOH = *32 mA 1.65 − 5.5 1.65 2.3 2.7 3.0 3.0 4.5 VOL Low−Level Output Voltage VIN = VIH or VIL IOL = 100 mA IOL = 4.0 mA IOL = 8.0 mA IOL = 12 mA IOL = 16 mA IOL = 24 mA IOL = 32 mA 1.65 − 5.5 1.65 2.3 2.7 3.0 3.0 4.5 Input Leakage Current VIN = 5.5 V or GND IOFF Power Off Leakage Current VIN = 5.5 V or VOUT = 5.5 V ICC Quiescent Supply Current VIN = 5.5 V or GND IIN VCC − 0.1 1.29 1.9 2.2 2.4 2.3 3.8 V 0.1 0.24 0.3 0.4 0.4 0.55 0.55 0.1 0.24 0.3 0.4 0.4 0.55 0.55 V 0 to 5.5 ±0.1 ±1.0 mA 0 1.0 10 mA 5.5 1.0 10 mA 0.08 0.2 0.22 0.28 0.38 0.42 AC ELECTRICAL CHARACTERISTICS (Input tr = tf = 3.0 ns) Symbol tPLH tPHL −555C 3 TA 3 1255C Min Typ Max Min Max Units RL = 1.0 MW, CL = 15 pF 1.65 1.8 2.5 ± 0.2 3.3 ± 0.3 5.0 ± 0.5 2.0 2.0 1.0 1.0 0.5 9.1 7.6 5.0 3.7 3.1 15 12.5 9.0 6.3 5.2 2.0 2.0 1.0 1.0 0.5 15.6 13 9.5 6.5 5.5 ns RL = 500 W, CL = 50 pF 3.3 ± 0.3 5.0 ± 0.5 1.5 0.8 4.4 3.7 7.2 5.9 1.5 0.8 7.5 6.2 Parameter Propagation Delay Input A to Y TA = 255C VCC (V) Condition CAPACITIVE CHARACTERISTICS Symbol Typical Units CIN Input Capacitance Parameter VCC = 5.5 V, VI = 0 V or VCC Condition 7.0 pF CPD Power Dissipation Capacitance 10 MHz, VCC = 3.3 V, VI = 0 V or VCC 10 MHz, VCC = 5.5 V, VI = 0 V or VCC 9.0 11 pF http://onsemi.com 3 NL27WZ17 A or B OUTPUT GND tPLH Y INPUT VCC 50% RL tPHL 50% VCC A 1−MHz square input wave is recommended for propagation delay tests. Figure 3. Switching Waveforms VT , TYPICAL INPUT THRESHOLD VOLTAGE (VOLTS) CL Figure 4. Test Circuit 4 3 (VT)) 2 VHtyp (VT*) 1 1.65 1.8 2.3 2.7 3 3.5 VCC, POWER SUPPLY VOLTAGE (VOLTS) VHtyp = (VT) typ) − (VT* typ) 3.6 Figure 5. Typical Input Threshold, VT), VT* versus Power Supply Voltage VH Vin VCC VH VT) VT* VCC VT) VT* Vin GND GND VOH VOH Vout Vout VOL VOL (a) A Schmitt−Trigger Squares Up Inputs With Slow Rise and Fall Times (b) A Schmitt−Trigger Offers Maximum Noise Immunity Figure 6. Typical Schmitt−Trigger Applications http://onsemi.com 4 NL27WZ17 PACKAGE DIMENSIONS SC−88/SOT−363/SC70−6 DF SUFFIX CASE 419B−02 ISSUE W D e 6 5 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 419B−01 OBSOLETE, NEW STANDARD 419B−02. 4 HE −E− 1 2 DIM A A1 A3 b C D E e L HE 3 b 6 PL 0.2 (0.008) M E M A3 MILLIMETERS MIN NOM MAX 0.80 0.95 1.10 0.00 0.05 0.10 0.20 REF 0.10 0.21 0.30 0.10 0.14 0.25 1.80 2.00 2.20 1.15 1.25 1.35 0.65 BSC 0.10 0.20 0.30 2.00 2.10 2.20 INCHES NOM MAX 0.037 0.043 0.002 0.004 0.008 REF 0.004 0.008 0.012 0.004 0.005 0.010 0.070 0.078 0.086 0.045 0.049 0.053 0.026 BSC 0.004 0.008 0.012 0.078 0.082 0.086 MIN 0.031 0.000 C A A1 L SOLDERING FOOTPRINT* 0.50 0.0197 0.65 0.025 0.65 0.025 0.40 0.0157 1.9 0.0748 SCALE 20:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 http://onsemi.com 5 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NL27WZ17/D