OSP-201 CWDM 1 Channel Add/Drop Card Optiva™ Configurable Optical Splitter Communication Platform The OSP-201 enables the splitting of an optical signal onto two separate optical fibers at power ratios of 50/50, 70/30 and 90/10. Network Management SDI & HD-SDI System Design OSP-201 Composite Video, Audio & Data Optical Splitter With the OSP-201, you are able to input a fiber strand at a specified wavelength and output two fibers, each at the same designated wavelength. Power loss is specified by the relevant ratio of the OSP-201 version (see below). The OSP-201 is perfect for applications where common fiber count is limited and signals are distributed to different locations dropped from a common path. RGB/VGA/DVI Audio/FSK/Intercom Port A Data (Ethernet/Serial/USB) CATV/RF & L-Band Port B Features • Varying Power Ratios for Network-Specific Configuration Optical Switching, Routing & Redundancy Common Port • Optical Multicasting Passive Multiplexing Solutions • Drop the optical signal via a second fiber to each location Enclosures, Racks & Frames • Enhanced Optical Network Configuration • Minimization of Optical Fiber Optiv a™ • Compatible with OptivaView™ SNMP Management Suite Power Supplies & Accessories VAD Transmission General Specifications Insertion Loss Dimensions & Weight Operating Temperature Storage Temperature Relative Humidity See versions below Insert card (IC): 6.3” L x 0.8” W x 4.0” H; 10 oz -5° C to +70° C -40° C to +85° C 0-95%, Non-condensing Versions Available Model Number* OSP-201-1310-5050-XX-IC OSP-201-1310-7030-XX-IC OSP-201-1310-9010-XX-IC OSP-201-1550-5050-XX-IC OSP-201-1550-7030-XX-IC OSP-201-1550-9010-XX-IC Wavelength (+/- 40nm) Splitting Ratio & Fiber Type 1310nm 1310nm 1310nm 1550nm 1550nm 1550nm Singlemode Singlemode Singlemode Singlemode Singlemode Singlemode 50:50 70:30 90:10 50:50 70:30 90:10 Maximum Insertion Loss (dB) Port Port Port Port Port Port A: A: A: A: A: A: 3.9; 2.1; 0.8; 3.9; 2.1; 0.8; Port Port Port Port Port Port B B B B B B MADE IN THE USA 3.9 6.4 12.7 3.9 6.4 12.7 *ST, FC, SC, and LC optical connectors are available. Please specify your preference (instead of "XX" in the model number), when ordering. 800-867-8426 • [email protected] • www.opticomm.com • Contact Opticomm for custom requirements. Opticomm reserves the right to change specifications without notice