Ferroxcube P cores and accessories P26/16 CORE SETS 18 ±0.4 Effective core parameters SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1) 0.400 mm−1 Ve effective volume 3530 mm3 Ie effective length 37.6 mm Ae effective area 93.9 mm2 Amin minimum area 77.4 mm2 m mass of set ≈20 g 11.5 0 3.8 −0.4 ±0.6 21.2 +0.8 25.5 0 ±0.5 ∅5.4 +0.2 0.5 0 +0.4 11 0 2.9 ±0.15 16.1 ±0.2 CBW425 M2.6 Dimensions in mm. Fig.1 P26/16 core set. Core sets for filter applications Clamping force for AL measurements, 200 ±50 N. GRADE 3D3 3H3 TYPE NUMBER (WITH NUT) TYPE NUMBER (WITHOUT NUT) µe 100 ±3% ≈ 32 ≈ 1630 P26/16-3D3-E100/N P26/16-3D3-E100 160 ±3% ≈ 51 ≈ 890 P26/16-3D3-E160/N P26/16-3D3-E160 P26/16-3D3-E250/N P26/16-3D3-E250 − P26/16-3D3 250 ±3% ≈ 80 ≈ 510 2 150 ±25% ≈ 685 ≈0 160 ±3% ≈ 51 ≈ 940 P26/16-3H3-E160/N P26/16-3H3-E160 250 ±3% ≈ 80 ≈ 550 P26/16-3H3-E250/N P26/16-3H3-E250 315 ±3% ≈ 100 ≈ 420 P26/16-3H3-E315/N P26/16-3H3-E315 400 ±3% ≈ 127 ≈ 310 P26/16-3H3-E400/N P26/16-3H3-E400 ≈ 201 ≈ 180 P26/16-3H3-A630/N P26/16-3H3-A630 ≈ 1590 ≈0 − P26/16-3H3 630 ±3% 5 000 ±25% 2008 Sep 01 TOTAL AIR GAP (µm) AL (nH) 993 Ferroxcube P cores and accessories P26/16 Core sets for general purpose transformers and power applications Clamping force for AL measurements, 200 ±50 N. GRADE 3C81 3C91 3F3 AL (nH) AIR GAP (µm) µe TYPE NUMBER 160 ±3% ≈ 51 ≈ 950 P26/16-3C81-E160 250 ±3% ≈ 80 ≈ 560 P26/16-3C81-A250 315 ±3% ≈ 100 ≈ 420 P26/16-3C81-A315 400 ±3% ≈ 127 ≈ 320 P26/16-3C81-A400 630 ±3% ≈ 200 ≈ 190 P26/16-3C81-A630 6700 ±25% ≈ 2130 ≈0 6700 ±25% P26/16-3C81 ≈ 2130 ≈0 160 ±3% ≈ 51 ≈ 950 P26/16-3F3-E160 250 ±3% ≈ 80 ≈ 560 P26/16-3F3-A250 315 ±3% ≈ 100 ≈ 420 P26/16-3F3-A315 400 ±3% ≈ 127 ≈ 320 P26/16-3F3-A400 630 ±3% ≈ 200 ≈ 190 P26/16-3F3-A630 ≈ 1470 ≈0 4600 ±25% P26/16-3C91 P26/16-3F3 Core sets of high permeability grades Clamping force for AL measurements, 200 ± 50 N. GRADE 3E27 AL (nH) µe AIR GAP (µm) 12000 ±25% ≈ 3820 ≈0 TYPE NUMBER P26/16-3E27 Properties of core sets under power conditions B (mT) at CORE LOSS (W) at H = 250 A/m; f = 25 kHz; T = 100 °C f = 25 kHz; ˆ = 200 mT; B T = 100 °C f = 100 kHz; ˆ = 100 mT; B T = 100 °C f = 100 kHz; ˆ = 200 mT; B T = 100 °C f = 400 kHz; ˆ = 50 mT; B T = 100 °C 3C81 ≥320 ≤ 0.82 − − − 3C91 ≥315 − 3F3 ≥315 − GRADE ≤ ≤ 0.4 Note 1. Measured at 60 °C. 2008 Sep 01 0.21(1) 994 ≤ 1.6 (1) − − ≤ 0.65 Ferroxcube P cores and accessories P26/16 INDUCTANCE ADJUSTERS General data handbook, halfpage PARAMETER O 5.65 0.2 0 SPECIFICATION Material of head and thread polypropylene (PP), glass fibre reinforced Maximum operating temperature 125 °C 12.2 4.45 M 2.6 4.7 min 1 MBE210 Dimensions in mm. Fig.2 P26/16 inductance adjuster. Inductance adjuster selection chart GRADE AL (nH) 3H3 TYPES FOR LOW ADJUSTMENT (applies to all types) ∆L/L(1) TYPES FOR MEDIUM ∆L/L(1) ADJUSTMENT TYPES FOR HIGH ADJUSTMENT ∆L/L(1) 63 − − − − ADJ-P26-RED 25 100 − − − − ADJ-P26-RED 22 − ADJ-P26-RED 160 − 15 − − 250 ADJ-P26-RED 10 − − ADJ-P26-BROWN 23 315 ADJ-P26-RED 8 − − ADJ-P26-BROWN 18 25 400 ADJ-P26-RED 6 ADJ-P26-BROWN 13 ADJ-P26-GREY 630 ADJ-P26-BROWN 8 ADJ-P26-GREY 16 − − 1000 ADJ-P26-BROWN 5 ADJ-P26-GREY 9 − − 1600 − − ADJ-P26-GREY 5 − 100 − − − − ADJ-P26-RED 160 − − ADJ-P26-RED 250 ADJ-P26-RED 9 − 400 − 8 ADJ-P26-GREY 3D3 − Note 1. Maximum adjustment range. 2008 Sep 01 14 995 17 − ADJ-P26-GREY − − 21 − 35 − Ferroxcube P cores and accessories P26/16 COIL FORMERS General data for CP-P26/16 coil former PARAMETER SPECIFICATION Coil former material polybutyleneterephtalate (PBT), glass reinforced, flame retardant in accordance with “UL 94V-0” ; UL file number E45329 (R) Maximum operating temperature 155 °C, “IEC 60085”, class F 0 10.8 0.15 handbook, full pagewidth 0.5 0.4 0 0 12.8 0.15 20.9 0.2 2.7 0.6 0.15 11.7 0 MBE211 0.5 Dimensions in mm. Fig.3 Coil former CP-P26/16. Winding data and area product for CP-P26/16 coil former NUMBER OF SECTIONS WINDING AREA (mm2) MINIMUM WINDING WIDTH (mm) AVERAGE LENGTH OF TURN (mm) AREA PRODUCT Ae x Aw (mm4) TYPE NUMBER 1 37.1 9.3 52.6 3480 CP-P26/16-1S 2 2 × 17.5 2 × 4.35 52.6 2 x 1640 CP-P26/16-2S 3 3 × 11 3 × 2.7 52.6 3 x 1030 CP-P26/16-3S 2008 Sep 01 996 Ferroxcube P cores and accessories P26/16 General data 6-pins P26/16 coil former for PCB mounting PARAMETER SPECIFICATION Coil former material polyamide (PA6.6), glass reinforced, flame retardant in accordance with “UL 94V-0” ; UL file number E41938(M) Maximum operating temperature 130 °C, “IEC 60085”, class B Pin material copper-zinc alloy (CuZn), tin (Sn) plated Resistance to soldering heat “IEC 60068-2-20” , Part 2, Test Tb, method 1B, 350 °C, 3.5 s Solderability “IEC 60068-2-20” , Part 2, Test Ta, method 1, 235 °C, 2 s 10.8 max 7.1 handbook, full pagewidth 9.7 0.75 2.8 31.45 21.05 11.65 max max min 28.5 12.7 2.4 4.35 min 10.3 max 12.25 max MGB626 Dimensions in mm. Fig.4 P26/16 coil former for PCB mounting; 6-pins. Winding data and area product for 6-pins P26/16 coil former for PCB mounting NUMBER OF SECTIONS MINIMUM WINDING AREA (mm2) NOMINAL WINDING WIDTH (mm) AVERAGE LENGTH OF TURN (mm) MINIMUM LENGTH OF PINS (mm) AREA PRODUCT Ae x Aw (mm4) 1 36.7 9.7 52.7 4.4 3450 CPV-P26/16-1S-6PD 1 36.7 9.7 52.7 6.8 3450 CPV-P26/16-1S-6PDL 2 2 × 16.6 2 × 4.5 52.7 4.4 2 x 1560 CPV-P26/16-2S-6PD 2 2 × 16.6 2 × 4.5 52.7 6.8 2 x 1560 CPV-P26/16-2S-6PDL 3 3 × 10.3 3 × 2.8 52.7 4.4 3 x 967 CPV-P26/16-3S-6PD(1) 3 3 × 10.3 3 × 2.8 52.7 6.8 3 x 967 CPV-P26/16-3S-6PDL (1) Note 1. In accordance with “UL 94-HB” . 2008 Sep 01 997 TYPE NUMBER Ferroxcube P cores and accessories P26/16 MOUNTING PARTS General data ITEM Tag plate REMARKS FIGURE material: phenolformaldehyde (PF), glass reinforced TYPE NUMBER 5 TGP-P26/16-C 6 CON-P26/16 7 SPR-P26/16 8 CLM/TP-P26/16 flame retardant: in accordance with “UL 94V-0”; UL file number E41429 maximum operating temperature: 180 °C, “IEC 60085” , class H pins: copper-tin alloy (CuSn), tin (Sn) plated resistance to soldering heat in accordance with “IEC 60068-2-20” , Part 2, Test Tb, method 1B: 350 °C, 3.5 s solderability in accordance with “IEC 60068-2-20”, Part 2, Test Ta, method 1: 235 °C, 2 s Container copper-zinc alloy, tin (Sn) plated earth pins: presoldered Spring CrNi-steel Clamp spring steel, tin-plated spring force: ≈200 N when mounted handbook, full pagewidth 18 15.24 2.1 1.5 10.16 ∅0.8 4.5 6.5 15.24 5.08 1.3 +0.15 0 mark 27.8 max. 6 2.54 Dimensions in mm. Fig.5 Tag plate: TGP-P26/16-C. 2008 Sep 01 998 CBW273 Ferroxcube P cores and accessories P26/16 10 handbook, full pagewidth 8.2 1 0.6 mark 23.55 min. 5 8 18.4 max. 27.7 max. CBW426 Dimensions in mm. Fig.6 P26/16 container. 0.3 1.4 0 handbook, halfpage 25.3 max MBE216 Dimensions in mm. Fig.7 P26/16 spring. 2008 Sep 01 999 Ferroxcube P cores and accessories P26/16 handbook, halfpage 8.6 21.1 25.4 4.8 16.6 25.4 MBE682 Dimensions in mm. Fig.8 Clamp: CLM/TP-P26/16. 2008 Sep 01 1000