P2SMA130A THRU P2SMA220A 130V-220V 200W Surface Mount Transient Voltage Suppressors FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Available in uni-directional 200 W peak pulse power capability with a 10/1000 μs waveform • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC MECHANICAL DATA Case: DO-214AC (SMA) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS compliant, and commercial grade Terminals: Matte tin plated leads, solderable J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 1A whisker test per Polarity: Color band denotes the cathode end MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Peak pulse power dissipation with a 10/1000 μs waveform (fig. 1) PPPM Peak pulse current with a 10/1000 μs waveform (fig. 3) VALUE UNIT (1)(2) 200 W (1) See next table A IPPM Power dissipation at TA = 25 °C (fig. 6) Operating junction and storage temperature range PD 0.5 W TJ, TSTG - 55 to + 150 °C Notes (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 °C per fig. 2 A (2) Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) DEVICE TYPE DEVICE MARKING CODE BREAKDOWN VOLTAGE VBR AT IT (1) (V) TEST CURRENT IT (mA) STAND-OFF VOLTAGE VWM (V) MAXIMUM REVERSE LEAKAGE AT VWM ID (μA) (1) MAXIMUM PEAK PULSE SURGE CURRENT IPPM (A) (2) MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) MAXIMUM TEMPERATURE OF VBR (%/°C) 0.140 MIN. MAX. P2SMA130A 2VK 124 137 1.0 111 1.0 1.11 179 P2SMA140A 2VL 133 147 1.0 119 1.0 1.04 192 0.140 P2SMA150A 2VM 143 158 1.0 128 1.0 0.97 207 0.140 P2SMA170A 2VN 162 179 1.0 145 1.0 0.85 234 0.150 P2SMA180A 2VP 171 189 1.0 154 1.0 0.81 246 0.150 P2SMA200A 2VQ 190 210 1.0 171 1.0 0.73 274 0.150 P2SMA220A 2VR 209 231 1.0 185 1.0 0.61 328 0.150 Notes (1) Pulse test: t 50 ms p (2) Surge current waveform per fig. 3 and derate per fig. 2 THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER VALUE UNIT Thermal resistance, junction to ambient air SYMBOL RJA (1) 250 °C/W Thermal resistance, junction to mount RJM (1) 50 °C/W Note (1) Mounted on minimum recommended pad layout E-mail: [email protected] 1 of 2 Web Site: www.taychipst.com P2SMA130A THRU P2SMA220A 130V-220V 200W Surface Mount Transient Voltage Suppressors RATINGS AND CHARACTERISTIC CURVES Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage, % PPPM - Peak Pulse Power (kW) 100 10 1 0.1 0.2" x 0.2" (5.0 mm x 5.0 mm) off Voltage, VWM Copper Pad Areas 0.01 100 75 50 25 0 0.1 1 10 100 1000 10 000 0 75 100 125 150 Fig. 1 - Peak Pulse Power Rating Curve Fig. 2 - Pulse Derating Curve tr = 10 μs tr = 8 μs Transient Thermal Impedance (°C/W) 100 Half Value - IPP IPPM 2 50 td = 1000 μs td = 20 μs td 1.0 3.0 2.0 100 10 1 0.01 4.0 0.1 1 10 100 1000 t - Time (ms) tp - Pulse Duration (s) Fig. 3 - Pulse Waveform Fig. 5 - Typical Transient Thermal Impedance PM(av) - Steady State Power Dissipation (W) 0 175 1000 TJ = 25 °C Pulse Width (td) is Defined as the Point Where the Peak Current Decays to 50 % of IPPM 0 100 CJ - Junction Capacitance (pF) 50 TJ - Initial Temperature (°C) Peak Value IPPM Measured at Zero Bias 10 25 td - Pulse Width (μs) 150 IPPM - Peak Pulse Current, % IRSM P2SMA130A THRU P2SMA220A Measured at Stand-off Voltage VWM TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 1 120 130 140 150 160 170 180 190 200 210 200 0.6 FR-4 Board, on Minimum Recommended Pad Layout 0.5 0.4 0.3 0.2 0.1 0 0 25 50 75 100 125 150 VWM - Reverse Stand-Off Voltage (V) TA - Ambient Temperature (°C) Fig. 4 - Typical Junction Capacitance Fig. 6 - Power Derating Curve E-mail: [email protected] 2 of 2 175 Web Site: www.taychipst.com