New Product P2SMA130A thru P2SMA220A Vishay General Semiconductor Surface Mount TRANSZORB® Transient Voltage Suppressors FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Available in uni-directional 200 W peak pulse power capability with a 10/1000 μs waveform • Excellent clamping capability • Very fast response time DO-214AC (SMA) • Low incremental surge resistance • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C PRIMARY CHARACTERISTICS VBR 130 V to 220 V PPPM 200 W PD 0.5 W TJ max. 150 °C TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive and telecommunication. • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC • Halogen-free according to IEC 61249-2-21 definition MECHANICAL DATA Case: DO-214AC (SMA) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS compliant, and commercial grade Terminals: Matte tin plated leads, solderable J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 1A whisker test per Polarity: Color band denotes the cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Peak pulse power dissipation with a 10/1000 μs waveform (fig. 1) Peak pulse current with a 10/1000 μs waveform (fig. 3) Power dissipation at TA = 25 °C (fig. 6) Operating junction and storage temperature range SYMBOL PPPM (1)(2) VALUE UNIT 200 W IPPM (1) See next table A PD 0.5 W TJ, TSTG - 55 to + 150 °C Notes (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 °C per fig. 2 A (2) Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal Document Number: 89376 Revision: 20-Apr-11 For technical questions within your region, please contact one of the following: www.vishay.com [email protected], [email protected], [email protected] 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product P2SMA130A thru P2SMA220A Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) DEVICE TYPE DEVICE MARKING CODE P2SMA130A 2VK BREAKDOWN VOLTAGE VBR AT IT (1) (V) MIN. MAX. 124 137 TEST CURRENT IT (mA) STAND-OFF VOLTAGE VWM (V) MAXIMUM REVERSE LEAKAGE AT VWM ID (μA) (1) MAXIMUM PEAK PULSE SURGE CURRENT IPPM (A) (2) MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) MAXIMUM TEMPERATURE OF VBR (%/°C) 1.0 111 1.0 1.11 179 0.140 P2SMA140A 2VL 133 147 1.0 119 1.0 1.04 192 0.140 P2SMA150A 2VM 143 158 1.0 128 1.0 0.97 207 0.140 P2SMA170A 2VN 162 179 1.0 145 1.0 0.85 234 0.150 P2SMA180A 2VP 171 189 1.0 154 1.0 0.81 246 0.150 P2SMA200A 2VQ 190 210 1.0 171 1.0 0.73 274 0.150 P2SMA220A 2VR 209 231 1.0 185 1.0 0.61 328 0.150 Notes (1) Pulse test: t 50 ms p (2) Surge current waveform per fig. 3 and derate per fig. 2 THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Thermal resistance, junction to ambient air Thermal resistance, junction to mount VALUE UNIT RJA (1) 250 °C/W RJM (1) 50 °C/W Note (1) Mounted on minimum recommended pad layout ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE P2SMA130A-M3/61T 0.064 61T 1800 7" diameter plastic tape and reel P2SMA130A-M3/5AT 0.064 5AT 7500 13" diameter plastic tape and reel RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage, % PPPM - Peak Pulse Power (kW) 100 10 1 0.1 0.2" x 0.2" (5.0 mm x 5.0 mm) off Voltage, VWM Copper Pad Areas 0.01 100 75 50 25 0 0.1 1 10 100 1000 10 000 0 25 50 75 100 125 150 td - Pulse Width (μs) TJ - Initial Temperature (°C) Fig. 1 - Peak Pulse Power Rating Curve Fig. 2 - Pulse Derating Curve www.vishay.com 2 175 For technical questions within your region, please contact one of the following: Document Number: 89376 [email protected], [email protected], [email protected] Revision: 20-Apr-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product P2SMA130A thru P2SMA220A Vishay General Semiconductor tr = 10 μs tr = 8 μs 1000 TJ = 25 °C Pulse Width (td) is Defined as the Point Where the Peak Current Decays to 50 % of IPPM Peak Value IPPM Transient Thermal Impedance (°C/W) IPPM - Peak Pulse Current, % IRSM 150 100 Half Value - IPP IPPM 2 50 td = 1000 μs td = 20 μs td 0 1.0 3.0 2.0 CJ - Junction Capacitance (pF) 0.1 1 10 100 1000 t - Time (ms) tp - Pulse Duration (s) Fig. 3 - Pulse Waveform Fig. 5 - Typical Transient Thermal Impedance 100 Measured at Zero Bias 10 10 1 0.01 4.0 PM(av) - Steady State Power Dissipation (W) 0 100 Measured at Stand-off Voltage VWM TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 1 120 130 140 150 160 170 180 190 200 210 200 0.6 FR-4 Board, on Minimum Recommended Pad Layout 0.5 0.4 0.3 0.2 0.1 0 0 25 50 75 100 125 150 VWM - Reverse Stand-Off Voltage (V) TA - Ambient Temperature (°C) Fig. 4 - Typical Junction Capacitance Fig. 6 - Power Derating Curve 175 PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-214AC (SMA) Cathode Band Mounting Pad Layout 0.110 (2.79) 0.100 (2.54) 0.065 (1.65) 0.049 (1.25) 0.177 (4.50) 0.157 (3.99) 0.012 (0.305) 0.006 (0.152) 0.060 (1.52) MIN. 0.208 (5.28) REF. 0.090 (2.29) 0.078 (1.98) 0.060 (1.52) 0.030 (0.76) 0.074 (1.88) MAX. 0.066 (1.68) MIN. 0.008 (0.203) 0 (0) 0.208 (5.28) 0.194 (4.93) Document Number: 89376 Revision: 20-Apr-11 For technical questions within your region, please contact one of the following: www.vishay.com [email protected], [email protected], [email protected] 3 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1