2SD1160 TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT Process) 2SD1160 Switching Applications Suitable for Motor Drive Applications Unit: mm • High DC current gain • Low saturation voltage: VCE (sat) = 0.6 V (max) (IC = 2A, IB = 40 mA) • Built-in free wheel diode Absolute Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Collector-base voltage VCBO 50 V Collector-emitter voltage VCEO 20 V Emitter-base voltage VEBO 6 V DC IC 2 Pulse ICP 4 IFP 1 Collector current Diode forward surge current (t = 1 s) Collector power dissipation Ta = 25°C Tc = 25°C Junction temperature Storage temperature range PC 1 10 A A W Tj 150 °C Tstg −55 to 150 °C JEDEC ― JEITA ― TOSHIBA 2-7B1A Note: Using continuously under heavy loads (e.g. the application of high Weight: 0.36 g (typ.) temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Equivalent Circuit COLLECTOR BASE ≈ 800 Ω EMITTER 1 2006-11-21 2SD1160 Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Collector cut-off current ICBO VCB = 50 V, IE = 0 ― ― 1 μA Emitter cut-off current IEBO VEB = 5 V, IC = 0 2.5 6.25 15 mA IC = 20 mA, L = 40 mH 20 ― ― V VCE = 2 V, IC = 1 A 100 ― 300 hFE (2) VCE = 2 V, IC = 2 A 60 ― ― Collector emitter saturation voltage VCE (sat) IC = 2 A, IB = 40 mA ― 0.4 0.6 V Base-emitter saturation voltage VBE (sat) IC = 2 A, IB = 40 mA ― ― 1.5 V Emitter-collector forward voltage VECF IE = 1 A, IB = 0 ― ― 2.0 V Collector-emitter sustaining voltage VCEO (SUS) hFE (1) (Note) DC current gain Note: hFE (1) classification O: 100 to 200, Y: 150 to 300 Classification Min Max 2SD1160-O 100 200 2SD1160-Y 150 300 Marking D1160 Part No. (or abbreviation code) Lot No. Characteristics indicator A line indicates lead (Pb)-free package or lead (Pb)-free finish. 2 2006-11-21 2SD1160 IC – VCE hFE – IC 1000 1.0 8 0.8 500 DC current gain hFE (A) Collector current IC Common emitter Common emitter Tc = 25°C 10 6 5 0.6 4 0.4 3 Tc = 100°C 25 100 −25 50 30 IB = 2 mA 0.2 10 10 0 0 0 VCE = 2 V 300 2 4 8 6 10 Collector-emitter voltage 12 30 100 VBE (sat) – IC Base-emitter saturation voltage VBE (sat) (V) Common emitter IC/IB = 50 0.3 Tc = −25°C 25 100 0.1 0.05 0.03 30 100 300 1000 Collector current IC 3000 3 Tc = −25°C 1 0.5 25 100 0.2 30 (mA) IC/IB = 50 5 100 300 1000 Collector current IC IE – VECF Transient thermal resistance rth (°C/W) IE (mA) Emitter current 100 IB = 0 Tc = 100°C 25 −25 50 30 10 0.2 0.4 0.6 0.8 1.0 Emitter-collector forward voltage 3000 (mA) rth – tw 1000 300 (mA) 10 Common emitter 500 3000 VCE (V) 1 0.5 1000 Collector current IC 14 VCE (sat) – IC Collector-emitter saturation voltage VCE (sat) (V) 300 1.2 1.4 VECF 1000 100 10 1 0.1 1m 1.6 (V) Curves apply only to limited areas of thermal resistance. (Single nonrepetitive pulse) Tc = 25°C 10 m 100 m 1 Pulse width 3 10 100 1000 tw (s) 2006-11-21 2SD1160 Safe Operating Area 10 V Operating conditions used for a 1 Collector current IC (A) test circuit shown in Figure 1 L = 10 mH must not exceed this shaded 3 ms area. T.U.T Tc = 25°C 0.5 INPUT 330 Ω VCC 2 ms Figure 1 Safe Operating Area Test Circuit 0.01 0 0 10 20 30 40 50 Collector-emitter voltage 60 70 VCE (V) PC – Ta Collector power dissipation PC (W) 1.2 1.0 0.8 0.6 0.4 0.2 0 0 20 40 60 80 100 120 140 160 Ambient temperature Ta (°C) 4 2006-11-21 2SD1160 RESTRICTIONS ON PRODUCT USE 20070701-EN • The information contained herein is subject to change without notice. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 5 2006-11-21