Transistor 2SD1330 Silicon NPN epitaxial planer type For low-voltage output amplification For muting For DC-DC converter Unit: mm 6.9±0.1 ■ Absolute Maximum Ratings Symbol Ratings Unit Collector to base voltage VCBO 25 V Collector to emitter voltage VCEO 20 V Emitter to base voltage VEBO 12 V Peak collector current ICP 1 A Collector current IC 0.5 A Collector power dissipation PC 600 mW Junction temperature Tj 150 ˚C Storage temperature Tstg –55 ~ +150 ˚C 1.0 4.5±0.1 0. 0.55±0.1 0.45±0.05 (Ta=25˚C) Parameter ■ Electrical Characteristics 0.85 4.1±0.2 ● 2.4±0.2 2.0±0.2 3.5±0.1 ● Low collector to emitter saturation voltage VCE(sat). Low ON resistance Ron. High foward current transfer ratio hFE. M type package allowing easy automatic and manual insertion as well as stand-alone fixing to the printed circuit board. 3 2 2.5 1 1.25±0.05 ● 1.0 R ● 1.0±0.1 ■ Features 2.5±0.1 1.5 R0.9 R0.9 7 0.4 1.5 2.5 1:Base 2:Collector 3:Emitter EIAJ:SC–71 M Type Mold Package (Ta=25˚C) Symbol Parameter min Conditions typ max Unit 100 nA Collector cutoff current ICBO VCB = 25V, IC = 0 Collector to base voltage VCBO IC = 10µA, IE = 0 25 V Collector to emitter voltage VCEO IC = 1mA, IB = 0 20 V Emitter to base voltage VEBO IE = 10µA, IC = 0 12 V hFE1 Forward current transfer ratio *1 VCE = 2V, IC = 0.5A*2 200 800 hFE2 VCE = 2V, IC = 1A*2 Collector to emitter saturation voltage VCE(sat) IC = 0.5A, IB = 20mA Base to emitter saturation voltage VBE(sat) IC = 0.5A, IB = 50mA Transition frequency fT VCB = 10V, IE = –50mA, f = 200MHz 200 MHz Collector output capacitance Cob VCB = 10V, IE = 0, f = 1MHz 10 pF ON resistanse Ron*3 60 0.13 FE1 V 1.2 V Ω 1.0 *2 *1h 0.4 *3R on Rank classification Pulse measurement Measurement circuit 1kΩ Rank R S T hFE1 200 ~ 350 300 ~ 500 400 ~ 800 IB=1mA VB Ron= VV VA f=1kHz V=0.3V VB ✕1000(Ω) VA–VB 1 Transistor 2SD1330 PC — Ta IC — VCE 600 400 200 3.0mA 0.8 2.5mA 2.0mA 0.6 1.5mA 0.4 1.0mA 0.5mA 0.2 0 20 40 60 80 100 120 140 160 0 Ambient temperature Ta (˚C) 1 2 4 5 6 30 3 25˚C Ta=–25˚C 75˚C 0.3 0.1 0.03 0.3 1 3 800 Ta=75˚C 600 25˚C –25˚C 400 200 0.1 0.3 1 3 10 Collector current IC (A) 1000 8 Ron measuring circuit IB=1mA 300 ON resistance Ron (Ω) 12 VB 100 V 30 VA f=1kHz V=0.3V 10 3 1 4 0.3 0 10 25˚C 0.1 –25˚C 0.03 0.01 0.01 0.03 30 100 Collector to base voltage VCB (V) 0.1 0.3 1 3 10 VCB=10V Ta=25˚C 350 300 250 200 150 100 0.1 0.01 0.03 0.1 0.3 1 3 Base current IB (mA) 0 –1 –3 –10 –30 Emitter current IE (A) Ron — IB 16 3 Ta=75˚C 0.3 50 0 0.01 0.03 10 IE=0 Ta=25˚C f=1MHz 1 1 400 Cob — VCB 20 3 VCE=2V Collector current IC (A) 24 10 fT — I E 1000 10 0.1 30 Collector current IC (A) 1200 Forward current transfer ratio hFE IC/IB=10 0.01 0.01 0.03 IC/IB=25 hFE — IC 100 1 100 Collector to emitter voltage VCE (V) VBE(sat) — IC Base to emitter saturation voltage VBE(sat) (V) 3 Transition frequency fT (MHz) 0 Collector output capacitance Cob (pF) Ta=25˚C 3.5mA 1.0 800 Collector to emitter saturation voltage VCE(sat) (V) IB=4.0mA 0 2 VCE(sat) — IC 1.2 Collector current IC (A) Collector power dissipation PC (mW) 1000 10 –100 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: • Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. • Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR