P-511-378(V:1) PD050VX4 Version : 1 TECHNICAL SPECIFICATION MODEL NO. : PD050VX4 The content of this information is subject to be changed without notice. Please contact PVI or its agent for further information. Customer’s Confirmation FOR MORE INFORMATION: AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA, 92656 Http://www.AZDISPLAYS.com The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:1 P-511-378(V:1) PD050VX4 TECHNICAL SPECIFICATION CONTENTS NO. ITEM PAGE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Cover Contents Application Features Mechanical Specifications Mechanical Drawing of TFT-LCD module Input / Output Terminals Absolute Maximum Ratings Electrical Characteristics Pixel Arrangement Display Color and Gray Scale Reference Block Diagram Interface Timing Power On Sequence Optical Characteristics 1 2 3 3 3 4 6 10 10 12 13 14 15 20 20 24 25 26 27 - Handling Cautions Reliability Test Packing Diagram Revision History The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:2 P-511-378(V:1) PD050VX4 1.Application This data sheet applies to a color TFT LCD module, PD050VX4. This module applies to OA product, computer peripheral, industrial meter, image communication and multi-media. If you must use in severe reliability environment, please don’ t extend over PVI’ s reliability test conditions. If you use PD050VX4, Prime View advises your systems use PVI’ s timing controller IC (PVI-2003A) which will generate proper timing signals to control it. 2. Features . VGA (640*480 pixels) resolution . Amorphous silicon TFT LCD panel with back-light unit . Pixel in stripe configuration . Thin and light weight . Display Colors：262,144 colors .Optimum Viewing Direction：3 o’clock . Portrait mode . TTL transmission interface 3.Mechanical Specifications Parameter Screen Size Display Format Display Colors Active Area Pixel Pitch Pixel Configuration Surface Treatment Outline Dimension Weight Back-light Display mode Gray scale inversion direction Specifications 5.0(diagonal) 640(H)×(R, G, B)×480(V) 262,144 74.88 (H)×101.76(V) 0.156(H)×0.159(V) Stripe AG+SWV 91.4(H)×119.3 (V)×7.9(D) 120±10 CCFL, 1 tube Normally white 3 o`clock Unit inch dot mm mm mm g The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:3 P-511-378(V:1) PD050VX4 4.Mechanical Drawing of TFT-LCD Module Outline Drawing : Front View (unit：mm) .6 ±0 .1 0 ? 1.6±0.07 2?4 2- les Ho 0.1 .2± 2 ? 45.0±2.0 (1920,480) (1,480) 60.4±2.0 (1,1) (1920,1) GROUND AREA WITH B'D (USING CABLE) CN1 1 CN2 30 1 30 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:4 P-511-378(V:1) PD050VX4 Outline Drawing : Rear View (unit： ：mm) CN2 1 30 CN1 1 30 DETAIL "B" (S: 2/1,2PLS) 1 30 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:5 P-511-378(V:1) PD050VX4 5.Input / Output Terminals 5-1) TFT-LCD Panel Driving CN 1 LCD Module Connector FPC Down Connect , 30 Pins , Pitch : 0.5 mm Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Symbol DIO1 VSS1 VDD1 CLK VSS1 R/L R0 R1 R2 R3 R4 R5 VSS1 G0 G1 G2 G3 G4 G5 VSS1 B0 B1 B2 B3 B4 B5 LD REV POL DIO2 I/O I/O I I I I I I I I I I I I I I I I I I I I I I I I I I I I I/O Function Horizontal Start Pulse Signal Input or Output Ground Power Supply for Source Horizontal Shift Clock Ground Right/Left selection Red Data (LSB) Red Data Red Data Red Data Red Data Red Data (MSB) Ground Green Data (LSB) Green Data Green Data Green Data Green Data Green Data (MSB) Ground Blue Data (LSB) Blue Data Blue Data Blue Data Blue Data Blue Data (MSB) Load output signal Data invert control Polarity selection Horizontal Start Pulse Signal Input or Output Remark Note 5-6 Note 5-6 Note 5-7 Note 5-8 Note 5-9 Note 5-6 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:6 P-511-378(V:1) PD050VX4 CN 2 Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Symbol VSS2 V1 V2 V3 V4 V5 V6 V7 VSS2 V8 V9 V10 V11 V12 V13 V14 VSS2 VDD2 VCOM XON OE U/D CKV STVU STVD VGG GND VCC GND VEE I/O I I I I I I I I I I I I I I I I I I I I I I I I/O I/O I I I I I Function Ground Gamma Voltage 1 Gamma Voltage 2 Gamma Voltage 3 Gamma Voltage 4 Gamma Voltage 5 Gamma Voltage 6 Gamma Voltage 7 Ground Gamma Voltage 8 Gamma Voltage 9 Gamma Voltage 10 Gamma Voltage 11 Gamma Voltage 12 Gamma Voltage 13 Gamma Voltage 14 Ground Voltage for analog circuit Common Voltage NC Output Enable Up/Down selection Vertical Shift Clock Vertical Shift Pulse Signal Input or Output Vertical Shift Pulse Signal Input or Output Gate On Voltage Ground Voltage for logic circuit Ground Gate Off Voltage Remark Note 5-10 Note 5-10 Note 5-10 Note 5-10 Note 5-10 Note 5-10 Note 5-10 Note 5-10 Note 5-10 Note 5-10 Note 5-10 Note 5-10 Note 5-10 Note 5-10 Note 5-10 Note 5-5 Note 5-3 Note 5-4 Note 5-3 Note 5-3 Note 5-2 Note 5-1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:7 P-511-378(V:1) PD050VX4 Note 5-1: Gate off voltage, VEE=-5.5V Note 5-2: Gate on voltage, VGG=+15.4V Note 5-3: Select up or down shift U/D 1 0 STVU Hi-Z Input STVD Input Hi-Z Shift Down to Up Up to Down Note 5-4: Gate driver shift clock Note 5-5: When OE is connected to high “1”, the driver outputs are disabled (Gate output = VEE). Under this condition, the operation of registers will not be affected. Note 5-6: Select left or right shift R/L 1 0 DIO1 Input Hi-Z DIO2 Hi-Z Input Shift Left to right Right to left Note 5-7: Latch the polarity of outputs and switch the new data to outputs. At the rising edge (LD), latch the “POL” signal to control the polarity of the outputs. Note 5-8: Control whether the Data R0~G5 are inverted or not. (PVI suggests connecting to GND) When “REV=1”, these data will be inverted. EX: “00”→”3F”, “07”→”38”, “15”→”2A” Note 5-9: Polarity selector for dot-inversion control. Available at the rising edge of LD. When POL=1: Even outputs range from V1~V7, and Odd outputs range from V8~V14; When POL=0: Even outputs range from V8~V14, and Odd outputs range from V1~V7. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:8 P-511-378(V:1) PD050VX4 Note 5-10: VDD2 =+7.7V Typical Application Circuit (When V1= +7.7V) OPEN 1.5 V11 V13 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:9 P-511-378(V:1) PD050VX4 5-2) Backlight driving Connector type: JST BHSR-02VS-1, 2Pins, Pitch : 4 mm Pin No Symbol Description Remark 1 VL1 Input terminal (Hi voltage side) Wire Color : Pink 2 VL2 Input terminal (Low voltage side) Wire Color : White Note 5-11 Note 5-11 : Low voltage side of backlight inverter connects with ground of inverter circuits. 6.Absolute Maximum Ratings: VSS1=VSS2=GND=0V, Ta=25℃ Parameters Supply Voltage Symbol VDD1 VCC VDD2 VGG VGG-VEE VEE MIN. -0.5 -0.3 -0.5 -0.3 -0.3 -20 MAX. 5.0 6.0 12.0 40.0 40.0 0.3 Unit V V V V V V Remark 7.Electrical Characteristics 7-1) Recommended Operating Conditions: VSS1=VSS2=GND=0V, Ta=25℃ Item Supply Voltage for Source Driver Supply Voltage for Gate Driver Vcom Voltage Digital Input Voltage Symbol VDD1 VDD2 VGG VEE VCC Min. 2.3 6.5 14.4 -6.0 2.3 Typ. 3.3 7.7 15.4 -5.5 3.3 Max. 3.6 13.5 16.4 -5.0 5.5 Unit V V V V V Vcom VIH VIL 0.7 VCC 0 2.6 - VCC 0.3 VCC V V V Remark The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:10 P-511-378(V:1) PD050VX4 7-2) Recommended Driving Condition for Back Light Parameter Lamp Voltage Lamp Current Lamp Frequency Starting Voltage (25℃) (Reference Value) Starting Voltage (0℃) (Reference Value) Symbol VL IL 8.0 60 Unit V mA Ta=25℃ Remark IL=6mA Note 7-1 KHz Note 7-2 - 640 Vrms Note 7-3 - 740 Vrms Note 7-3 Min. 390 Typ. 410 Max. 430 PL 4.0 30 6.0 45 Vs - Vs - Note 7-1: In order to satisfy the quality of B/L, no matter use what kind of inverter, the output lamp current must between Min. and Max. to avoid the abnormal display image caused by B/L. Note 7-2: The waveform of lamp driving voltage should be as closed to a perfect sine wave as possible. Note 7-3: The” Max of starting voltage ” means the minimum voltage of inverter to turn on the CCFL and it should be applied to the lamp for more than 1 second to start up. Otherwise the lamp may not be turned on. 7-3) Power Consumption Parameter Supply Current for Gate Driver (Hi level) Supply Current for Gate Driver (Low level) Supply Current for Source Driver (Digital) Supply Current for Source Driver (Analog) Supply Current for Gate Driver (Digital) LCD Panel Power Consumption Back Light Lamp Power Consumption Symbol Condition IGG VGG=+15.4V IEE VEE=-5.5V IDD1 VDD1=+3.3V IDD2 VDD2=+7.7V ICC VCC=+3.3V - Typ. 0.090 0.103 4.7 17 0.009 146.5 2.46 Max. 0.100 0.110 5.0 20 0.010 155.0 - Unit Remark mA mA mA mA mA mW Note 7-4 W Note 7-5 Note 7-4: The power consumption for back light is not included. Note 7-5: Back light lamp power consumption is calculated by IL×VL. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:11 P-511-378(V:1) PD050VX4 8. Pixel Arrangement The LCD module pixel arrangement is the stripe. X Y R G B R G B R G B R G B R G B R G B 1st pixel R G B 478th Line 3rd Line R G B R G B 479th Line 2nd Line 1 st Line R G B R G B R G B 480th Line 1 Pixel = R G B 640th Pixel R G B R G B R G B R G B R G B R G B The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:12 P-511-378(V:1) PD050VX4 9.Display Color and Gray Scale Reference Color Input Color Data Green Red Blue R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0 Basic Colors Red Green Blue Black Red (63) Green (63) Blue (63) Cyan Magenta Yellow White Red (00) Red (01) Red (02) Darker ↓ Brighter Red (61) Red (62) Red (63) Green (00) Green (01) Green (02) Darker ↓ Brighter Green (61) Green (62) Green (63) Blue (00) Blue (01) Blue (02) Darker ↓ Brighter Blue (61) Blue (62) Blue (63) 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:13 P-511-378(V:1) PD050VX4 10. Block Diagram 10-1) TFT-module Block Diagram PD050VX4 PD050VX4. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:14 P-511-378(V:1) PD050VX4 11. Interface Timing 11.1) Timing Parameters AC Electrical Characteristics (VCC=VDD1=3.3V, VDD2=7.7V, GND=VSS1=VSS2=0V, Ta=25℃) Parameter Symbol Min. Typ. Max. Unit CLK Frequency Fclk - 25 40 MHz CLK Pulse Width Tcw 25 40 - ns Data Set-up Time Tsu 4 - - ns Data Hold Time Thd 2 - - ns Propagation Delay of DIO2/1 Tphl 6 10 15 ns Time That The Last Data to LD Tld 1 - - Tcw Pulse width of LD Twld 2 - - Tcw Time That LD to DIO1/2 Tlds 5 - - Tcw POL Set-up Time Tpsu 6 - - ns POL Hold Time Tphd 6 - - ns OE Pulse Width TOEV 1 - - µs CKV Pulse Width TCKV 500 - - ns STV Set-up Time TSUV 400 - - ns STV Hold Time THDV 400 - - ns Horizontal Display Period THDP - 640 - Tcw Horizontal Period Timing Range THP - 800 - Tcw Horizontal Lines Per Field TV 520 525 640 THP Vertical Display Timing Range TDV - 480 - THP The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:15 P-511-378(V:1) PD050VX4 % Tphl data % Fig. 11-1 Horizontal timing (1) Second data % % First data 70% Tsu 70 70 Thd (Output) DIO1/2 REV Data (Input) DIO1/2 CLK Tsu % 70 70% 1 Thd Tcw 70% 2 70 % Tphl 639 70 Last % 70 640 30 11.2) Timing Diagram The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:16 P-511-378(V:1) Tld PD050VX4 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:17 P-511-378(V:1) Fig. 11-3 Vertical shift clock timing OE TSUV CKV STVU/STVD 50% TOEV THDV TCKV 50% PD050VX4 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:18 P-511-378(V:1) Fig. 11-4 Vertical timing POL(Even Field) POL(Odd Field) STVU/STVD (VSY) (HSY) THP THDP PD050VX4 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:19 P-511-378(V:1) PD050VX4 12. Power On Sequence VGG VDD2 VDD1,VCC VSS(0V) VEE OFF T1 T3 Logic signal RGB-Video signal T2 OFF B/L OFF ON T4 OFF ON 10ms 10ms 1.10ms≦T1＜T2 2. 0ms＜T3≦T4≦10ms 13. Optical Characteristics 13-1) Specification: Parameter Vertical Viewing Angle Horizontal Contrast Ratio Rise Response time Fall Brightness Luminance Uniformity Lamp Life Time White Chromaticity Cross Talk Symbol Condition θ11,12 θ22 CR≧10 (3 o’clock) θ21 (9 o’clock) CR Tr θ=0° Tf θ=0°/φ=0 L U x y θ=0° MIN. 55 TYP. MAX. 60 Ta=25℃ Unit Remarks deg Note 13-1 55 60 - deg 40 45 - deg 200 300 70 50000 0.28 0.34 - 400 15 25 350 75 0.31 0.37 - 30 50 0.34 0.40 3.5 ms ms cd/㎡ % hr % Note 13-2 Note 13-3 Note 13-4 At 6mA Note 13-5 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:20 P-511-378(V:1) PD050VX4 All the optical measurement shall be executed 30 minutes after backlight being turn-on. The optical characteristics shall be measured in dark room (ambient illumination on panel surface less than 1 Lux). The measuring configuration shows as following figure. Photometer (TOPCON BM-5A or BM-7 fast) 500 mm +/- 50 mm Field = 1° TFT-LCD module DC/AC Inverter Optical characteristics measuring configuration Topcon BM-5A or BM-7 fast luminance meter 1° field of view is used in the testing (after 30 minutes’ operation). The typical luminance value is measured at lamp current 6.0 mA. Note 13-1: The definitions of viewing angles are as follow The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:21 P-511-378(V:1) PD050VX4 Note 13-2: The definition of contrast ratio CR = Luminance at gray level 63 Luminance at gray level 0 Note 13-3: Definition of Response Time Tr and Tf: White Black White 100% 90% Brightness 10% 0% Tr Tf Note 13-4: The uniformity of LCD is defined as U= The Minimum Brightness of the 9 testing Points The Maximum Brightness of the 9 testing Points Luminance meter : BM-5A or BM-7 fast(TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module The test pattern is white (Gray Level 63). 1/6 2/6 2/6 1/6 1/6 2/6 2/6 1/6 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:22 P-511-378(V:1) PD050VX4 Note 13-5: Cross Talk (CTK) = YA-YB ×100% YA YA: Brightness of Pattern A YB: Brightness of Pattern B Luminance meter : BM 5A or BM-7 fast (TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module Pattern A Pattern B (Gray Level 31) (Gray Level 31, central black box exclusive) YA YB 1/3 1/3 1/3 1/3 1/3 1/3 Black : Measuring Point (A and B are at the same point.) (Gray Level 0) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:23 P-511-378(V:1) PD050VX4 14. Handling Cautions 14-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Please connect the ground pattern of the inverter circuit surely. If the connection is not perfect, some following problems may happen possibly. 1.The noise from the backlight unit will increase. 2.The output from inverter circuit will be unstable. 3.In some cases a part of module will heat. c) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. d) Protective film (Laminator) is applied on surface to protect it against scratches and dirts. It is recommended to peel off the laminator before use and taking care of static electricity. 14-2) Precautions in mounting a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 14-3) Adjusting module a) Adjusting volumes on the rear face of the module have been set optimally before shipment. b) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 14-4) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. f) Please adjust the voltage of common electrode as material of attachment by 1 module. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:24 P-511-378(V:1) PD050VX4 15. Reliability Test No Test Item Test Condition 1 High Temperature Storage Test Ta = +80℃, 240 hrs 2 Low Temperature Storage Test Ta = -30℃ , 240hrs 3 High Temperature Operation Test Ta = +70℃, 240 hrs 4 Low Temperature Operation Test Ta = -20℃ , 240hrs 5 6 7 High Temperature & High Humidity Operation Test Ta = +60℃, 90%RH, 240 hrs (No Condensation) Thermal Cycling Test -30℃+80℃, 100 Cycles (non-operating) 30min 30min Frequency：10 ~ 55 HZ , Amplitude：1 mm Sweep time: 11 min Vibration Test (non-operating) Remark Test Period: 6 Cycles for each direction of X, Y, Z 8 9 Shock Test (non-operating) Electrostatic Discharge Test (non-operating) 100G, 6ms Direction: ±X, ±Y, ±Z Cycle: 3 times 200pF, 0Ω ±200V 1 time / each terminal Ta : ambient temperature Note : The protective film must be removed before temperature test. [Criteria] In the standard conditions, there is not display function NG issue occurred. (Including：line defect, no image) All the cosmetic specification is judged before the reliability stress. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:25 P-511-378(V:1) PD050VX4 16. Packing Diagram The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:26 P-511-378(V:1) PD050VX4 Revision History Rev. 1.0 Issued Date Sept. 12, 2006 New Revised Contents The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:27