P-511-295(V:2) PD035OX4 Version: 2.0 TECHNICAL SPECIFICATION MODEL NO : PD035OX4 Customer’s Confirmation Customer Date By PVI’s Confirmation FOR MORE INFORMATION: AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA, 92656 Http://www.AZDISPLAYS.com The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. PAGE:1 P-511-295(V:2) PD035OX4 TECHNICAL SPECIFICATION CONTENTS NO. ITEM PAGE - Cover 1 - Contents 2 1 Application 3 2 Features 3 3 Mechanical Specifications 3 4 Mechanical Drawing of TFT-LCD module 4 5 Input / Output Terminals 5 6 Absolute Maximum Ratings 8 7 Electrical Characteristics 9 8 Pixel Arrangement 15 9 Display Color and Gray Scale Reference 16 10 Block Diagram 17 11 SPI Register Description and Timing Characteristics 18 12 Power On Sequence 22 13 Optical Characteristics 22 14 Handling Cautions 25 15 Reliability Test 26 16 Packing 27 - Revision History 29 - Appendix 30 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. PAGE:2 P-511-295(V:2) PD035OX4 1. Application This technical specification applies to 3.5” color TFT-LCD panel PD035OX4. The TFT LCD panel applies to videophone, door phone and other electronic products which require high quality flat panel displays. 2. Features . Amorphous silicon TFT-LCD panel with LED Backlight unit . Support digital 8-bits serial / 24-bits parallel RGB and CCIR601/656 input mode. . Optimum viewing direction6 o’clock. . Provide source and gate drivers control timing. . Image Reversion : Up/Down and Left/Right . Wide View 3. Mechanical Specifications Parameter Screen Size Display Format Specifications 3.5 (diagonal) 320(RGB) x 234 Unit inch dot Display colors Active Area 262,144 71.6 (H)52.65 (V) mm Pixel Pitch Pixel Configuration Outline Dimension Surface Treatment 0.22375 (H)0.225 (V) Delta 84.03 (W)65.24 (H)3.43 (D) Anti – Glare+WV-film mm Back-light Weight LED 425 Display model Normally white mm g The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. PAGE:3 P-511-295(V:2) PD035OX4 NO BENDING AREA 4. Mechanical Drawing of TFT-LCD Module The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. PAGE:4 P-511-295(V:2) PD035OX4 5. Input / Output Terminals CN1 FPC Down Connect , 30Pins , Pitch : 0.5 mm Pin No Symbol I/O Description 1 D15(G5) I Green Data 2 D14(G4) I Green Data 3 D13(G3) I Green Data 4 D12(G2) I Green Data 5 D11(G1) I Green Data 6 D10(G0) I Green Data(LSB) 7 VDD2 I Analog power supply for source driver 8 V8 I Gamma correction voltage 8 9 V7 I Gamma correction voltage 7 10 V6 I Gamma correction voltage 6 11 V5 I Gamma correction voltage 5 12 V4 I Gamma correction voltage 4 13 V3 I Gamma correction voltage 3 14 V2 I Gamma correction voltage 2 15 V1 I Gamma correction voltage 1 16 VSS2 I Analog ground for source driver 17 D07(R7) I Red Data(MSB) 18 D06(R6) I Red Data 19 D05(R5) I Red Data 20 D04(R4) I Red Data 21 D03(R3) I Red Data 22 D02(R2) I Red Data 23 D01(R1) I Red Data 24 D00(R0) I Red Data(LSB) 25 CLK I Clock signal. Latching data at the rising edge 26 HS I Horizontal sync input in RGB mode and CCIR601 Note 5-4 27 VS I Vertical sync input in RGB mode and CCIR601 Note 5-5 28 DEN I Input data enable control.(Normally pull low) Note 5-6 29 VCC I Digital power supply for source driver IC Note 5-7 30 VCOM I Voltage for common electrode Note 5-8 Remark Note 5-1 Note 5-2 Note 5-3 Note 5-1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. PAGE:5 P-511-295(V:2) PD035OX4 CN2 FPC Down Connect , 30Pins , Pitch : 0.5 mm Pin No Symbol I/O Description Remark 1 VLED I Power supply for LED Note 5-9 2 GLED1 I Ground for LED 3 GLED2 I Ground for LED 4 NC - NC 5 VGH I Positive power for gate driver Note 5-10 6 VDD1 I Power supply for gate logic circuit Note 5-11 7 VSS1 I Ground for gate driver 8 VEE I Negative power for gate driver Note 5-12 9 VDD1 I Power supply for gate logic circuit Note 5-11 10 GND I Digital ground for source driver IC 11 RESETB I Hardware global reset, (low active) 12 VSET I Externally/Internally gamma voltage setup 13 U/D I Up/Down control for gate driver 14 L/R I Left/Right control for source driver 15 IF2 I Select the input data format 16 IF1 I (Serial RGB, Parallel RGB, CCIR601/656) 17 SPENA I Serial port data enable signal (normally pull high) `18 SPCK I Serial port clock. (Normally pull high) 19 SPDA I/O Serial port data input/output 20 POL O 21 D27(B7) I Blue Data(MSB) 22 D26(B6) I Blue Data 23 D25(B5) I Blue Data 24 D24(B4) I Blue Data 25 D23(B3) I Blue Data 26 D22(B2) I Blue Data 27 D21(B1) I Blue Data 28 D20(B0) I Blue Data(LSB) 29 D17(G7) I Green Data(MSB) 30 D16(G6) I Green Data Note 5-13 Note 5-14 Polarity select for the line inversion control signal Note 5-15 Note 5-1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. PAGE:6 P-511-295(V:2) PD035OX4 Note 5-1 : Digital data input. DX0 is LSB and DX7 is MSB. If parallel RGB input mode is used, D0X, D1X, and D2X indicate R, G and B data in turn. If serial RGB or CCIR601/656 input mode is selected, only D07~D00 are used, and others short to Vss. Note 5-2 : VDD2 Typ. = +5V Note 5-3 : The output voltage is determined by the digital input data. If digital RGB or CCIR601/656 input mode is selected, The 8 gamma correction reference voltages can be set to externally or generate internally. If VSET = ”H”, the gamma correction voltage generated externally If VSET = “L”, the default value is as below : (When VDD =+5V) Default Voltage(V) V1 4.29 V2 3.73 V3 3.33 V4 2.94 V5 2.62 V6 2.22 V7 1.51 V8 0.48 Note 5-4 : Horizontal sync input in digital RGB mode. Or HREF input in CCIR601 mode. ( Short to Vss if not used ) Note 5-5 : Vertical sync input in digital RGB mode. Or V123 input in CCIR601 mode. ( Short to Vss if not used ) Note 5-6 : Digital RGB data input format For digital RGB input data format, both SYNC. Mode and DEN mode are supported. If DEN signal is fixed low, SYNC. Mode is used. Otherwise , DEN mode is used. Note 5-7 : VCC Typ. = +3.3V Note 5-8 : VCOM Typ.+6.0Vpp Note 5-9 : ILED Typ. = 20mA., VLED Typ. = 9V Note 5-10 : VGH Typ. =+15V. Note 5-11 : VDD1 Typ.+3.3V. Note 5-12 : VEE Typ. = -15V. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. PAGE:7 P-511-295(V:2) PD035OX4 Note 5-13 : The definition of L/R , U/D Note 5-14 : IF1,IF2 control the input data format. IF2,IF1 Input data format L,L (default) Serial RGB L,H Parallel RGB H,L CCIR601 H,H CCIR656 Note 5-15 : When POL=L, output voltage is negative polarity. When POL=H, output voltage is positive polarity. 6.Absolute Maximum Ratings Parameter Supply voltage for source driver Supply voltage for gate driver Input signal voltage Symbol VCC MIN. -0.3 VSS1=VSS2=0 VTa = 25 MAX. Unit Remark +7.0 V VDD2 -0.3 +7.0 V VDD1 -0.3 +7.0 V H Level VGH -0.3 +32.0 V L Level VEE -22.0 +0.3 V VGH-VEE -0.3 +45.0 V VIN -0.3 VDD+0.3 V The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. PAGE:8 P-511-295(V:2) PD035OX4 7. Electrical Characteristics 7-1 Operating condition Parameter Supply voltage for source driver Supply voltage for gate driver Signal input voltage Signal output voltage Logic Analog Logic H level L level H level L level H level L level VSS1=VSS2=0 VTa = 25 MAX. Unit Remark +3.6 V +5.5 V +3.6 V +30 V -5 V VCC V 0.3VCC V VCC V 0.2VCC V Symbol MIN. VCC +3.0 VDD2 +3.8 VDD1 +3.0 VGH +10 VEE -17 VIH 0.7VCC VIL 0 VoH 0.8VCC VoL 0 Typ. +3.3 +5.0 +3.3 +15 -15 - VCOMAC - +6.0 - VP-P VCOMDC - 1.0 - V VCOM AC Component of VCOM DC Component of VCOM Note 7-1 Note 7-1 : PVI strongly suggests that the VCOMDC level shall be adjustable , and the adjustable level range is 1V1V , every module’s VCOMDC level shall be carefully adjusted to show a best image performance. 7-2 Recommended driving condition for LED backlight Parameter Supply voltage of LED backlight Supply current of LED backlight Symbol VLED ILED Min 9.0 - TYP 10.0 20 MAX 11.0 - Unit V mA Remark IL = 20 mA Note 7-2 Backlight Power Consumption PLED 360 400 440 mW Note 7-3 Note 7-2 : LED B/L applied information , please refer to the appendix at the end . Note 7-3 : PLED = 2*ILED*VLED . The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. PAGE:9 P-511-295(V:2) PD035OX4 7-3 Power consumption VSS1=VSS2=0 VTa = 25 Symb Conditions TYP. MAX. Unit ol Supply current for gate driver (Hi level) IGH VGH +15V 0.2 mA 0.5 VDD1 IDD1 Supply current for gate driver(Logic) mA 0.05 0.1 +3.3V Supply current for gate driver (Low mA IEE VEE -15V 0.2 0.5 level) Supply current for source mA VDD2 VDD2+5V 5.0 8.0 driver(Analog) Supply current for source driver(Logic) VCC VCC+3.3V 4.5 mA 7.0 LCD panel power consumption mW 48 80 Backlight power consumption PLED 400 440 mW Parameter Total power consumption Above data measured on serial mode: - 0.45 0.52 Remark VEE center voltage W If on parallel mode, ICC Typ.= 3.0mA, Max.=5.0mA ; panel power consumption Typ.= 41.5mW Max.= 72.8mW. If on CCIR601/656 mode, ICC Typ.= 6.0mA, Max.=10.0mA ; panel power consumption Typ.= 51.4mW Max.= 89.3mW. 7-4 Timing characteristics of input signals 7.4.1 Serial 8 bits RGB interface Characteristics Symbol CLK period TOSC Data setup time TSU Data hold time THD HS period TH HS pulse width THS HS rising time TCr HS falling time TCf VS pulse width TVS VS rising time TVr VS falling time TVf HS falling to VS falling time for THVO odd field VS falling to HS falling time for THVE even field VS-DEN time TVSE Min. 12 12 5 1 - Typ. 52 1224 90 3 - Max. 700 300 5 700 1.5 Unit ns ns ns TOSC TOSC ns ns TH ns us 0 3 - TOSC 0 3 - TOSC - 18 - TH Remark Note 7-4 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. PAGE:10 P-511-295(V:2) HS-DEN time DEN pulse width THE TEP VS period 108 - 204 960 264 - TOSC TOSC - 262 - TH st PD035OX4 th Note 7-4 : When SYNC mode is used, 1 data start from 204 CLK after HS fallings. 7.4.2 Parallel 24 bits RGB interface Characteristics Symbol CLK period TOSC Data setup time TSU Data hold time THD HS period TH HS pulse width THS HS rising time TCr HS falling time TCf VS pulse width TVS VS rising time TVr VS falling time TVf HS falling to VS falling time for THVO odd field VS falling to HS falling time for THVE even field Min. 12 12 5 1 - Typ. 156 408 30 3 - Max. 700 300 5 700 1.5 Unit ns ns ns TOSC TOSC ns ns TH ns us 0 3 - TOSC 0 3 - TOSC VS-DEN time TVSE - 18 - TH HS-DEN time DEN pulse width THE TEP 36 - 68 320 88 - TOSC TOSC - 262 - TH VS period st Remark Note 7-5 th Note 7-5 : When SYNC mode is used, 1 data start from 68 CLK after HS fallings. 7.4.3 CCIR601/656 Interface Characteristics CLK period Data setup time Data hold time Symbol TOSC TSU THD Min. 12 12 Typ. 37 - Max. - Unit ns ns ns Remark 7.4.4 Hardware reset timing Characteristics RESETB low pulse width Symbol TRSB Min. 200 Typ. - Max. - Unit ns Remark The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. PAGE:11 P-511-295(V:2) PD035OX4 7.5 Timing controller timing chart 7.5.1 Clock and Data waveform $ % ' ! ( ) * + + # " " # " # " ! $ % & % # " ! The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. PAGE:12 P-511-295(V:2) PD035OX4 7.5.2 HS,VS,DEN timing waveform HS and VS timing relationship O d d fie ld THVO HS VS E v e n fie ld HS TH V E VS HS and DEN timing relationship T HS HS T HE DEN HS, VS and DEN timing relationship The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. PAGE:13 P-511-295(V:2) PD035OX4 HS T VS VS T VSE DEN T EP 7.5.3 CCIR601 timing waveform (VS_POL=”H”, HS_POL=”L” in Register R2) ITU-R BT.601 NTSC Input Timing Data Blanking Data Blanking The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. PAGE:14 P-511-295(V:2) PD035OX4 ITU-R BT.601 PAL Input Timing Data Blanking Data Blanking 8. Pixel Arrangement The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. PAGE:15 P-511-295(V:2) PD035OX4 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. PAGE:16 P-511-295(V:2) PD035OX4 9. Display Color and Gray Scale Reference Input Color Data Color Red Green Blue R7 R6 R5 R4 R3 R2 R1 R0 G G G G G G G G B7 B6 B5 B4 B3 B2 B1 B0 7 6 5 4 3 2 1 0 Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Red (255) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Green (255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 Basic Blue (255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 Colors Cyan Magenta 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 Yellow 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Red (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Red (01) 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Red (02) 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Darker Red Brighter Red (253) 1 1 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Red (254) 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Red (255) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Green (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Green (01) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 Green (02) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 Darker Green Brighter Green (253) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 1 0 0 0 0 0 0 0 0 Green (254) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 Green (255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 Blue (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Blue (01) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 Blue (02) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 Darker Blue Brighter Blue (253) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. PAGE:17 P-511-295(V:2) PD035OX4 Blue (254) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 Blue (255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 10. Block Diagram The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. PAGE:18 P-511-295(V:2) PD035OX4 11. SPI Register Description and Timing Characteristics 11.1 Function Control Register Register R0 :Address(A3~A0)0000 Bit D7 D6 D5 D4 D3 D2 D1 D0 reserve Name STHD1 STHD0 STHP4 STHP3 STHP2 STHP1 STHP0 d Default 0 0 0 0 0 0 0 0 STHD [1:0] : adjust start pulse position by dot STHD1 STHD0 STH position adjust by dot 1 1 -1 1 0 -2 0 0 0 0 1 +1 STHP [4:0] : adjust start pulse position by pixel STHP4 STHP3 STHP2 STHP1 STHP0 1 1 1 1 1 1 1 1 1 0 1 1 1 0 1 1 1 1 0 0 1 1 0 1 1 1 1 0 1 0 1 1 0 0 1 1 1 0 0 0 1 0 1 1 1 1 0 1 1 0 1 0 1 0 1 1 0 1 0 0 1 0 0 1 1 1 0 0 1 0 1 0 0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 1 0 0 0 0 1 1 0 0 1 0 0 0 0 1 0 1 0 0 1 1 0 0 0 1 1 1 0 1 0 0 0 0 1 0 0 1 0 1 0 1 0 0 1 0 1 1 0 1 1 0 0 0 1 1 0 1 0 1 1 1 0 STH position adjust by pixel -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 0 +1 +2 +3 +4 +5 +6 +7 +8 +9 +10 +11 +12 +13 +14 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. PAGE:19 P-511-295(V:2) 0 1 1 1 Register R1 :Address(A3~A0)0001 1 +15 PD035OX4 Bit D7 D6 D5 D4 D3 D2 D1 D0 Name STVP3 STVP2 STVP1 STVP0 STVNT1 STVNT0 STVPAL1 STVPAL0 Default 0 0 0 0 0 0 0 1 STVP [3:0] : adjust first line position by line STVP3 STVP2 STVP1 STVP0 STV position adjust by line 1 1 1 1 -1 1 1 1 0 -2 1 1 0 1 -3 1 1 0 0 -4 1 0 1 1 -5 1 0 1 0 -6 1 0 0 1 -7 1 0 0 0 -8 0 0 0 0 0 0 0 0 1 +1 0 0 1 0 +2 0 0 1 1 +3 0 1 0 0 +4 0 1 0 1 +5 0 1 1 0 +6 0 1 1 1 +7 STVNT[1:0]: When NTSC mode, the relationship of first line in Even field and Odd field. 00: First line in Even field = First line in Odd field. 01: First line in Even field = First line in Odd field +1. 10: No use. 11: First line in Even field = First line in Odd field –1. STVPAL[1:0]: When PAL mode, the relationship of first line in Even field and Odd field. (Only for CCIR601/656 mode) 00: First line in Even field = First line in Odd field. 01: First line in Even field = First line in Odd field +1. 10: No use. 11: First line in Even field = First line in Odd field –1. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. PAGE:20 P-511-295(V:2) PD035OX4 Register R2 :Address(A3~A0)0010 Bit Name Default D7 D6 D5 D4 D3 D2 D1 D0 NPC_SE reserved reserved reserved reserved HS_POL VS_POL NPC_IN T 0 0 0 1 0 0 1 0 HS_POL: HS polarity setting. HS_POL = “L”, negative polarity. HS_POL = “H”, positive polarity. VS_POL: VS polarity setting. VS_POL = “L”, negative polarity. VS_POL = “H”, positive polarity. NPC_IN: Define the NTSC/PAL mode by SPI. NPC_IN = “L”, PAL. (Only for CCIR601/656 mode) NPC_IN = “H”, NTSC. NPC_SET: Set the NTSC/PAL auto detection or define by NPC_IN. NPC_SET = “L”, auto detection. NPC_SET = “H”, define by SPI. Register R3 :Address(A3~A0)0011 Bit D7 D6 D5 D4 D3 D2 D1 D0 Reserve Reserved Name Reserved Reserved Reserved Reserved PWD_EN Reserved d Default 0 0 1 0 1 0 1 1 PWD_EN: Set DAC power saving function. PWD_EN = “L”, disable. The DAC is always power on. PWD_EN = “H”, enable. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. PAGE:21 P-511-295(V:2) PD035OX4 11-2 SPI timing characteristic Characteristics SPCK period SPCK high width SPCK low width Data setup time Data hold time SPENA to SPCK setup time SPENA to SPDA hold time SPENA high pulse width SPDA output latency SPI"read"timing Symbol TCK TCKH TCKL TSU1 THD1 TCS TCE TCD TCR Min. 60 30 30 12 12 20 20 50 - 1 A3 Max. - Unit ns ns ns ns ns ns ns ns TCK Remark TCR TSU1 THD1 SPDA Typ. 1/2 A2 A1 A0 D7 D6 D5 D4 D3 D2 D1 D0 TCKL SPCK TCKH TCK SPENA TCD TCS TCE SPI"write"timing TSU1 THD1 SPDA 0 A3 A2 A1 A0 D7 D6 D5 D4 D3 D2 D1 D0 TCKL SPCK TCKH TCK SPENA TCD TCS TCE The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. PAGE:22 P-511-295(V:2) PD035OX4 12. Power On Sequence The Power on sequence only effect by VCC,VSS,VDD,VEE and VGH, the others do not care. 1) 10msT1<T2 2) 0ms<T3T410ms 13. Optical Characteristics Parameter Symbol Horizontal 21, 22 Viewing 11 Vertical Angle 12 Condition CR10 MIN. 55 40 30 TYP. MAX. 60 --45 --35 --- 200 400 --- Ta = 25 Unit Remarks deg deg Note 13-1 deg At optimized Contrast Ratio CR Viewing Note 13-2 angle Tr Tf =0 ----- 15 25 30 50 ms ms Note 13-3 Uniformity U 9 point 70 75 - % Note 13-4 Brightness White x y - Center point =0 =0 - 200 - 250 0.31 0.33 30000 - Response time Chromaticity LED Life Time Rise Fall Ta=25 cd/ Note 13-5 Note 13-5 hrs Note13-6 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. PAGE:23 P-511-295(V:2) PD035OX4 Note 13-1 : The definitions of viewing angles Note 13-2 : CR Luminance when Testing point is White Luminance when Testing point is Black Contrast ratio is measured in optimum common electrode voltage. Note 13-3 : The definition of response time : White Black W hite 100% 90% Brightness 10% 0% Tr Tf The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. PAGE:24 P-511-295(V:2) PD035OX4 Note 13-4 : The uniformity of LCD is defined as The Minimum Brightness of the 9 testing Points The Maximum Brightness of the 9 testing Points Luminance meter : BM-5A or BM-7 fast (TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module U= The test pattern is white (Gray Level 63). 1 /6 2 /6 2 /6 1 /6 1 /6 2 /6 2 /6 1 /6 Note 13-5 : Topcon BM-7(fast) luminance meter 1.0 field of view is used in the testing (use PVI backlight after 5 minutes operating), ILED = 20mA. Note 13-6 : Constant current 20mA for each loop , and the center brightness must more than 50% of initial brightness value . The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. PAGE:25 P-511-295(V:2) 14. Handling Cautions PD035OX4 14-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Please connect the ground pattern of the inverter circuit surely. If the connection is not perfect, some following problems may happen possibly. 1. The noise from the backlight unit will increase. 2. The output from inverter circuit will be unstable. 3. In some cases a part of module will heat. c) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. d) Protective film (Laminator) is applied on surface to protect it against scratches and dirts. It is recommended to peel off the laminator before use and taking care of static electricity. 14-2) Precautions in mounting a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 14-3) Adjusting module a) Adjusting volumes on the rear face of the module have been set optimally before shipment. b) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 14-3) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. f) Please adjust the voltage of common electrode as material of attachment by 1 module. 14-4) Polarizer mark The polarizer mark is to describe the direction of wide view angle film how to mach up with the rubbing direction. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. PAGE:26 P-511-295(V:2) PD035OX4 15. Reliability Test No 1 2 Test Item High Temperature Storage Test Low Temperature Storage Test 3 4 High Temperature Operation Test Low Temperature Operation Test High Temperature & High Humidity Operation Test Thermal Cycling Test (non-operating) 5 6 7 Vibration test (non-operating) 8 Shock Test(non-operating) 9 Electrostatic Discharge Test (non-operating) Test Condition Ta = +70, 240 hrs Ta = -20, 240 hrs Ta=60,240hrs Ta = 0, 240 hrs Ta = +60, 90%RH, 240 hrs -20 +70 , 200 Cycles 30 min 30 min Frequency : 10 ~ 55Hz Amplitude : 1mm , sweep time : 11 mins Test period : 6 cycles for each direction of X,Y, Z 100G , 6ms , 3cycles for each direction of X,Y,Z 200pF, 0 Machine mode = 200V 1 time / each terminal Ta: ambient temperature Note : The protective film must be removed before temperature test. [Criteria] 1. Main LCD should normally work under the normally condition no defect of function,screen quality and appearance (including : mura ,line defect ,no image) 2. After the vibration and shock test , can’t be found chip broken.. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. PAGE:27 P-511-295(V:2) PD035OX4 16. Packing The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. PAGE:28 P-511-295(V:2) PD035OX4 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. PAGE:29 P-511-295(V:2) PD035OX4 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. PAGE:30 P-511-295(V:2) Revision History Rev. 0.1 1.0 Eng Issued Date Dec.2 , 2005 Jan.13,2005 2.0 June,24,2006 PD035OX4 Revised Contents Preliminary Modify Page 23 13. Optical Characteristics LED Life Time 10000 hrs modify to 30000 hrs The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. PAGE:31 P-511-295(V:2) PD035OX4 Appendix CON 2 VLED (Pin 01) 15+ 0.5V VLED (Pin 01) 15+ 0.5V LED 20K 5% VC1 1KVR GLED1 (Pin 02) VB1 2SC2412 20K 5% VC2 1KVR 20mA , 1V 2K 5% VB2 VE1 2K 5% LED GLED2 (Pin 03) 2SC2412 20mA , 1V VE2 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. PAGE:32