P-511-459(V:3) PM065WX1 Version: 3.0 TECHNICAL SPECIFICATION Model NO. PM065WX1 The content of this information is subject to be changed without notice. Please contact PVI or its agent for further information. Customer’s Confirmation Customer Date By FOR MORE INFORMATION: AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA 92656 Http://www.AZDISPLAYS.com PVI’s Confirmation Confirmed By Prepared By The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Page:1 Ltd. P-511-459(V:3) PM065WX1 Revision History Rev. 1.0 Issued Date Revised Sept. 12. 2007 New Contents 2.0 Add March.24.2008 Page 24 14.Handling Cautions 14-1 item d) Modify Page 20 13. Optical Characteristics 3.0 June.9.2008 Change White Chromaticity (Typ) x : 0.31 0.29 (Typ) y : 0.34 0.33 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:2 P-511-459(V:3) PM065WX1 TECHNICAL SPECIFICATION CONTENTS NO. ITEM PAGE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Cover Revision History Contents Application Features Mechanical Specifications Mechanical Drawing of TFT-LCD module Input / Output Terminals Absolute Maximum Ratings Electrical Characteristics Pixel Arrangement Display Color and Gray Scale Reference Block Diagram Interface Timing Power On Sequence Optical Characteristics 1 2 3 4 4 4 5 7 11 11 12 13 14 15 20 20 24 25 26 Handling Cautions Reliability Test Packing Diagram The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:3 P-511-459(V:3) PM065WX1 Κ 1. ApplicationΚ This data sheet applies to a color TFT LCD module, PM065WX1. PM065WX1 module applies to OA product, portable DVD, car TV (must use Analog to Digital driving board), which requires high quality flat panel display. If you must use in severe reliability environment, please don’t extend over PVI’s reliability test conditions. If you use PM065WX1, Prime View advises to use PVI’s timing controller IC (PVI-2003A) on your system which will generate proper timing signals to control PM065WX1. Κ 2. FeaturesΚ . Wide VGA (800*480 pixels) resolution . Amorphous silicon TFT LCD panel with LED Back-light . Pixel in stripe configuration . Thin and light weight . Display Colorsୖ262,144 colors . TTL transmission interface . Wide viewing angle 3. Mechanical Specificationsୖ ୖ Parameter Screen Size Display Format Display Colors Active Area Pixel Pitch Pixel Configuration Outline Dimension Weight Back-light Surface treatment Display mode Gray scale inversion direction Specifications 6.5 (diagonal) 800 Ý (R, G, B) Ý 480 262,144 143.4 (H) Ý 79.2 (V) 0.17925 (H) Ý 0.165 (V) Stripe 155.2 (w) Ý 89.4 (H) Ý 5.8 (typ.) (D) (130)·10 42-LED Anti-glare and Wide View Film Normally white 6 o’clock [ref to Note 13-1 ] Unit inch dot mm mm mm g The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:4 P-511-459(V:3) PM065WX1 Κ 4. Mechanical Drawing of TFT-LCD ModuleΚ The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:5 P-511-459(V:3) PM065WX1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:6 P-511-459(V:3) PM065WX1 Κ 5. Input / Output TerminalsΚ Κ 5-1) TFT-LCD Panel DrivingΚ Connecter typeୖ ୖIRISO 9637S-30Y905 30pin Pitchୖ ୖ0.5mm CN 1 Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Symbol DIO1 VSS1 VDD1 CLK VSS1 R/L R0 R1 R2 R3 R4 R5 VSS1 G0 G1 G2 G3 G4 G5 VSS1 B0 B1 B2 B3 B4 B5 LD REV POL DIO2 I/O I/O I I I I I I I I I I I I I I I I I I I I I I I I I I I I I/O Function Horizontal Start Pulse Signal Input or Output Ground Power Supply Horizontal Shift Clock Ground Right / Left selection Red Data (LSB) Red Data Red Data Red Data Red Data Red Data (MSB) Ground Green Data (LSB) Green Data Green Data Green Data Green Data Green Data (MSB) Ground Blue Data (LSB) Blue Data Blue Data Blue Data Blue Data Blue Data (MSB) Load output signal Data invert control Polarity selection Horizontal Start Pulse Signal Input or Output Remark Note 5-6 Note 5-4 Note 5-6 Note 5-7 Note 5-8 Note 5-9 Note 5-6 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:7 P-511-459(V:3) PM065WX1 CN 2 Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Symbol VSS2 V1 V2 V3 V4 V5 V6 V7 VSS2 V8 V9 V10 V11 V12 V13 V14 VSS2 VDD2 VCOM XON OE U/D CKV STVU STVD VGG GND VCC GND VEE I/O I I I I I I I I I I I I I I I I I I I I I I I I/O I/O I I I I I Function Ground Gamma Voltage 1 Gamma Voltage 2 Gamma Voltage 3 Gamma Voltage 4 Gamma Voltage 5 Gamma Voltage 6 Gamma Voltage 7 Ground Gamma Voltage 8 Gamma Voltage 9 Gamma Voltage 10 Gamma Voltage 11 Gamma Voltage 12 Gamma Voltage 13 Gamma Voltage 14 Ground Voltage for analog circuit Common Voltage NC Output Enable Up / Down Selection Vertical Shift Clock Vertical Shift Pulse Signal Input or Output Vertical Shift Pulse Signal Input or Output Gate On Voltage Ground Voltage for logic circuit Ground Gate Off Voltage Remark Note 5-10 Note 5-10 Note 5-5 Note 5-3 Note 5-7 Note 5-3 Note 5-3 Note 5-2 Note 5-1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:8 P-511-459(V:3) PM065WX1 Note 5-1ΚGate off voltage, VEE(TYP.)= -8V Note 5-2ΚGate on voltage, VGG(TYP.)= +17V Note 5-3ΚSelect up or down shift U/D 1 0 STVU Hi-Z Input STVD Input Hi-Z Shift Down to Up Up to Down Note 5-4ΚGate driver shift clock Note 5-5ΚWhen OE is connected to high “1”, the driver outputs are disabled (Gate output = VEE). Under this condition, the operation of registers will not be affected. Note 5-6ΚSelect left or right shift R/L 1 0 DIO1 Input Hi-Z DIO2 Hi-Z Input Shift Left to right Right to left Note 5-7ΚLatch the polarity of outputs and switch the new data to outputs. At the rising edge (LD), latch the “POL” signal to control the polarity of the outputs. Note 5-8ΚControl whether the Data R0~G5 are inverted or not. (PVI suggests connecting to GND) When “REV=1”, these data will be inverted. EX: “00”˧”3F”, “07”˧”38”, “15”˧”2A” Note 5-9ΚPolarity selector for dot-inversion control. Available at the rising edge of LD. When POL=1: Even outputs range from V1~V7, and Odd outputs range from V8~V14; When POL=0: Even outputs range from V8~V14, and Odd outputs range from V1~V7. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:9 P-511-459(V:3) PM065WX1 Note 5-10ΚTypical Application Circuit (When VDD2 (Typ.) = +9.5V) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:10 P-511-459(V:3) PM065WX1 Κ 5-2) Backlight drivingΚ Connector typeୖJST BHSR-02VS-1 Pin No Symbol Description Remark 1 + Input terminal (Anode) Wire colorୖRed 2 - Input terminal (Cathode) Wire ColorୖBlack Κ 6. Absolute Maximum RatingsΚ VSS1=VSS2=GND=0V, Ta=25ଇ Parameters Supply Voltage Symbol VDD1 VCC VDD2 VGG VGG-VEE VEE MIN. MAX. -0.3 5.0 -0.5 -0.3 -20 12.0 40.0 40.0 0.3 Unit V V V V V V Remark Κ 7. Electrical CharacteristicsΚ Κ 7-1) Recommended Operating ConditionsΚ VSS1=VSS2=GND=0V, Ta=25ଇ Item Supply Voltage for Source Driver Supply Voltage for Gate Driver Digital Input Voltage Vcom Voltage Symbol VDD1 VDD2 VGG VEE VCC VIH VIL Vcom Min. 3.0 9.0 3.0 0.8VDD1 0 - Typ. 3.3 9.5 17 -8 3.3 3.8 Max. Unit 3.6 V 10 V V V 3.6 V VDD1 V 0.2VDD1 V V Remark Κ 7-2) Recommended driving condition for LED back lightΚ Ta = 25ଇ Parameter Symbol Min TYP MAX Unit Remark Supply voltage of LED backlight VLED - - (11) V Note 7-1 Supply current of LED backlight ILED - 20 - mA Note 7-2 Backlight Power Consumption PLED 3080 mW Note 7-1/Note 7-3 Note 7-1ΚThe ILED=20 mA, Constant current. Note 7-2ΚThe LED driving condition is defined for each LED module. (3 LED Serial) Input current = 20mA * 14 = 280mA Note 7-3ΚPLED = VLED-1 * ILED-1 + VLED-2* ILED-2 ….. + VLED-13 * ILED-13+VLED-14 * ILED-14 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:11 P-511-459(V:3) PM065WX1 VLED -1 VLED -2 j h VLED -13 VLED-14 Κ 7-3) Power ConsumptionΚ Parameter Supply Current for Gate Driver (Hi level) Supply Current for Gate Driver (Low level) Supply Current for Source Driver (Digital) Supply Current for Source Driver (Analog) Supply Current for Gate Driver (Digital) LCD Panel Power Consumption (W/O B/L) Total Power Consumption Symbol IGG IEE IDD1 IDD2 ICC Condition VGG= +17V VEE= -8V VDD1= +3.3 VDD2= +9.5 VCC= +3.3 Typ. 0.16 0.14 2.50 20.00 0.10 202.44 - Max. 0.48 0.42 5.00 40.00 0.30 409.08 3489 Unit mA mA mA mA mA mW mW Remark Note 7-4 Note 7-4ΚThe power consumption for back light is not included. Κ 8. Pixel ArrangementΚ The LCD module pixel arrangement is the stripe. R G B R G B R G B 1 st Line RGB R G B R G B 2 nd Line RGB R G B 3 rd Line RGB 1 st Pixel 800 th Pixel 1 Pixel = R G B R GB 478 th Line R GB R GB RGB 479 th Line R GB R GB R GB 480 th Line RGB RGB The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:12 P-511-459(V:3) PM065WX1 Κ 9. Display Color and Gray Scale ReferenceΚ Color Basic Colors Red Green Blue R5 Black 0 Red (63) 1 Green (63) 0 Blue (63) 0 Cyan 0 Magenta 1 Yellow 1 White 1 Red (00) 0 Red (01) 0 Red (02) 0 Darker ˨ ˨ Brighter Red (61) 1 Red (62) 1 Red (63) 1 Green (00) 0 Green (01) 0 Green (02) 0 Darker ˨ ˨ Brighter Green (61) 0 Green (62) 0 Green (63) 0 Blue (00) 0 Blue (01) 0 Blue (02) 0 Darker ˨ ˨ Brighter Blue (61) 0 Blue (62) 0 Blue (63) 0 R4 0 1 0 0 0 1 1 1 0 0 0 Red R3 R2 0 0 1 1 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 R1 0 1 0 0 0 1 1 1 0 0 1 R0 0 1 0 0 0 1 1 1 0 1 0 Input Color Data Green G5 G4 G3 G2 G1 G0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 B5 0 0 0 1 1 1 0 1 0 0 0 B4 0 0 0 1 1 1 0 1 0 0 0 Blue B3 B2 0 0 0 0 0 0 1 1 1 1 1 1 0 0 1 1 0 0 0 0 0 0 B1 0 0 0 1 1 1 0 1 0 0 0 B0 0 0 0 1 1 1 0 1 0 0 0 ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 0 1 1 1 0 1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:13 P-511-459(V:3) PM065WX1 10. Block DiagramΚ Κ TFT-module Block DiagramΚ Κ 2003 6.5” PM065WX1 PM065WX1 2003 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:14 P-511-459(V:3) PM065WX1 11. Interface Timing 11.1) Timing Parameters AC Electrical Characteristics (VCC=VDD1= 3.3V, VDD2=9.5V, GND=VSS1=VSS2=0V, Ta=25ଇ) Parameter Symbol Min. Typ. Max. Unit CLK Frequency Fclk - 32 40 MHz CLK Pulse Width Tcw 25 - - ns Data Set-up Time Tsu 4 - - ns Data Hold Time Thd 2 - - ns Propagation Delay of DIO2/1 Tphl 6 10 15 ns Time That The Last Data to LD Tld 1 - - Tcw Pulse width of LD Twld 2 - - Tcw Time That LD to DIO1/2 Tlds 5 - - Tcw POL Set-up Time Tpsu 6 - - ns POL Hold Time Tphd 6 - - ns OE Pulse Width TOEV 1 - - µs CKV Pulse Width TCKV 500 - - ns STV Set-up Time TSUV 400 - - ns STV Hold Time THDV 400 - - ns Horizontal Display Period THDP - 800 - Tcw Horizontal Period Timing Range THP - 1056 - Tcw Horizontal Lines Per Field TV 484 508 620 THP Vertical Display Timing Range TDV - 480 - THP The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:15 ˆ˃ʸ ˧̃˻˿ ˅ ˦˸˶̂́˷ʳ˷˴̇˴ ˙˼˺ˁʳ˄˄ˀ˄ʳ˛̂̅˼̍̂́̇˴˿ʳ̇˼̀˼́˺ʳʻ˄ʼ ˊ˃ʸ ˧̃˻˿ ˊˌˌ ˊ˃ʸ ˊ˃ʸ ˟˴̆̇ʳʳʳʳʳ˷˴̇˴ ˋ˃˃ Κ 11.2) Timing DiagramΚ ˙˼̅̆̇ʳ˷˴̇˴ ʻˢ̈̇̃̈̇ʼ ˗˜ˢ˄˂˅ ˥˘˩ ˗˴̇˴ ʻ˜́̃̈̇ʼ ˗˜ˢ˄˂˅ ˖˟˞ ˊ˃ʸ ˧̆̈ ˊ˃ʸ ˧˻˷ ˊ˃ʸ ˊ˃ʸ ˧̆̈ ˊ˃ʸ ˄ ˧˻˷ ˧˶̊ P-511-459(V:3) PM065WX1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:16 ˡ˸˺˴̇˼̉˸ ˛˼˺˻ˀ̍ ˛˼˺˻ˀ̍ ˊ˃ʸ ˧̃˻˷ ˊ˃ʸ ˧̃̆̈ ˊ˃ʸ ˊ˃ʸ ˛˼˺˻ˀ̍ ˘̉˸́ ̂̈̇̃̈̇̆ ˢ˷˷ ̂̈̇̃̈̇̆ ˧̃̆̈ ˧̃˻˷ ˊ˃ʸ ˣˢ˟ ˟˗ ˗˜ˢʳ˄˂˅ ʻ˜́̃̈̇ʼ ˟˗ ˖˟˞ ˊ˃ʸ ˊ˃ʸ ˟˴̆̇ ˧˻˷ ˆ˃ʸ ˊ˃ʸ ˧˿˷̆ ˧̊˿˷ ˙˼˺ˁʳ˄˄ˀ˅ʳ˛̂̅˼̍̂́̇˴˿ʳ̇˼̀˼́˺ʻ˅ʼ ˊ˃ʸ ˆ˃ʸ ˊ˃ʸ ˧̃̆̈ ˧̃˻˷ ˆ˃ʸ ˣ̂̆˼̇˼̉˸ P-511-459(V:3) PM065WX1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:17 P-511-459(V:3) ˙˼˺ˁʳ˄˄ˀˆʳ˩˸̅̇˼˶˴˿ʳ̆˻˼˹̇ʳ˶˿̂˶˾ʳ̇˼̀˼́˺ ˢ˘ ˧˦˨˩ ˖˞˩ ˦˧˩˨˂˦˧˩˗ ˈ˃ʸ ˧ˢ˘˩ ˧˛˗˩ ˧˖˞˩ʳ ˈ˃ʸ PM065WX1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:18 P-511-459(V:3) ˙˼˺ˁʳ˄˄ˀˇʳ˩˸̅̇˼˶˴˿ʳ̇˼̀˼́˺ ˣˢ˟ʻ˘̉˸́ʳ˙˼˸˿˷ʼ ˣˢ˟ʻˢ˷˷ʳ˙˼˸˿˷ʼ ˦˧˩˨˂˦˧˩˗ ʻ˩˦ˬʼ ʻ˛˦ˬʼ ˧˛ˣ ˧˛˗ˣ PM065WX1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:19 P-511-459(V:3) PM065WX1 Κ 12. Power On SequenceΚ ˩ ˩ ˦˦ ˩ ˚˚ ˩ ˗˗ ˅ ˗ ˗ ˄ʿ˩ ˖ ˖ ʻ˃ ˩ ʼ ˩ O FF ˘˘ O FF O N T1 T3 ˟ ̂ ˺ ˼˶ ʳ̆ ˼˺ ́ ˴ ˿ ˥ ˚ ˕ ˀ˩ ˼˷ ˸ ̂ ʳ̆ ˼˺ ́ ˴ ˿ T2 >10m s >10m s O FF T4 O FF B a c k lig h t O N 1.10msЉT1T2 2. 0msT3ЉT4Љ10ms Κ 13. Optical CharacteristicsΚ Κ 13-1) SpecificationΚ Ta=25к Parameter Horizontal Viewing Angle Vertical Contrast Ratio Response Rise time Fall Brightness Luminance Uniformity LED Life Time White Chromaticity Cross Talk Symbol Condition MIN. 55 ɂ 21, ɂ 22 CR10 35 ɂ 12 50 ɂ 11 At optimized CR 250 Viewing angle Tr ɂ =0¶ Tf ɂ =0°/ɐ =0 450 U 75 20000 +25¶C x 0.25 ɂ =0¶ y 0.29 ɂ =0¶ ɂ =0¶ TYP. 60 40 55 MAX. - Unit deg deg deg 400 - - 15 25 550 80 0.29 0.33 - 30 50 ms ms cd/້ % hr % 0.33 0.37 3.5 Remarks Note 13-1 Note 13-2 Note 13-3 Note 13-4 Note 13-5 Note 13-8 Note 13-6 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:20 P-511-459(V:3) PM065WX1 Note 13-1ΚThe definitions of viewing angles are as follow Note 13-2ΚThe definition of contrast ratio ˖˥ = ˟̈̀˼́˴́˶˸ʳ˴̇ʳ˺̅˴̌ʳ˿˸̉˸˿ʳˉˆ ˟̈̀˼́˴́˶˸ʳ˴̇ʳ˺̅˴̌ʳ˿˸̉˸˿ʳ˃ Note 13-3ΚDefinition of Response Time Tr and TfΚ White Black White 100% 90% Brightness 10% 0% Tr Tf The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:21 P-511-459(V:3) PM065WX1 Note 13-4ΚThe optical characteristics shall be measured in dark room (ambient illumination on panel surface less than 1 Lux). The measuring configuration shows as following figure. Photometer (TOPCON BM-5A or BM-7 fast) 500 mm +/- 50 mm Field = 1° TFT-LCD module DC/AC Inverter Optical characteristics measuring configuration Note 13-5: The uniformity of LCD is defined asΚ U= The Minimum Brightness of the 9 testing Points The Maximum Brightness of the 9 testing Points Luminance meter: BM-5A or BM-7 fast (TOPCON) Measurement distance: 500 mm +/- 50 mm Ambient illumination: < 1 Lux Measuring direction: Perpendicular to the surface of module The test pattern is white (Gray Level 63). 1/6 2/6 2/6 1/6 1/6 2/6 2/6 1/6 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:22 P-511-459(V:3) PM065WX1 Note 13-6: Cross Talk (CTK) = ⏐YA-YB⏐ ͪ100% YA YA: Brightness of Pattern A YB: Brightness of Pattern B Luminance meterΚBM 5A or BM-7 fast (TOPCON) Measurement distanceΚ500 mm +/- 50 mm Ambient illuminationΚ< 1 Lux Measuring directionΚPerpendicular to the surface of module Pattern A Pattern B (Gray Level 31) (Gray Level 31, central black box exclusive) YA YB 1/3 1/3 1/3 1/3 1/3 1/3 Black : Measuring Point (A and B are at the same point.) (Gray Level 0) Note 13-7ΚTopcon BM-7(fast)luminance meter 1¶ field of view is used in the testing. Note 13-8ΚThe “LED Life time” is defined as the module brightness decrease to 50% original Brightness that the ambient temperature is 25¶C and ILED =280mA. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:23 P-511-459(V:3) PM065WX1 14. Handling CautionsΚ Κ 14-1) Mounting of moduleΚ Κ a) Please power off the module when you connect the input/output connector. b) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. c) Protective film (Laminator) is applied on surface to protect it against scratches and dirt. d) Please following the tear off direction as figure14-1 to remove the protective film as slowly as possible, so that electrostatic charge can be minimized. 14-2) Precautions in mountingΚ Κ a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 14-3) Adjusting moduleΚ Κ P Adjusting volumes on the rear face of the module have been set optimally before shipment. P Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 14-4) OthersΚ Κ a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. P The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. P If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. P Observe all other precautionary requirements in handling general electronic components. P Please adjust the voltage of common electrode as material of attachment by 1 module. 14-5) Polarizer markΚ Κ The polarizer mark is to describe the direction of wide view angle film how to mach up with the rubbing direction. Figure 14-1 the way to peel off protective film The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:24 P-511-459(V:3) PM065WX1 Κ 15. Reliability TestΚ No Test Item Test Condition 1 High Temperature Storage Test Ta = +95ଇ, 240 hrs 2 Low Temperature Storage Test Ta = -40ଇ, 240 hrs 3 High Temperature Operation Test Ta = +85ଇ, 240 hrs 4 Low Temperature Operation Test Ta = -30ଇ, 240 hrs 5 6 7 High Temperature & High Humidity Operation Test Thermal Cycling Test (non-operating) Vibration Test (non-operating) Remark Ta = +60ଇ, 90%RH, 240 hrs (No Condensation) -30ଇ+80ଇ, 200 Cycles 30min 30min Frequencyୖ10 ~ 55 HZ , Amplitudeୖ1 mm Sweep timeୖ11 min Test Periodୖ6 Cycles for each direction of X, Y, Z 8 9 Shock Test (non-operating) Electrostatic Discharge Test 100G, 6ms Direction: ·X, ·Y, ·Z Cycle: 3 times 200pF, 0ȳ ·200V (non-operating) 1 time / each terminal Ta: ambient temperature Note: The protective film must be removed before temperature test. [Criteria] There can be no display failures after exposure to reliability tests. (including : line defect ,no image). All the cosmetic specification is judged before the reliability stress. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:25 P-511-459(V:3) PM065WX1 Κ 16. PackingΚ The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:26