P-511-485(V:1) PM100WX6 Version:1.0 TECHNICAL SPECIFICATION MODEL NO : PM100WX6 The content of this information is subject to be changed without notice. Please contact PVI or its agent for further information. Customer’s Confirmation Customer Date By PVI’s Confirmation FOR MORE INFORMATION: AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA 92656 Http://www.AZDISPLAYS.com Confirmed By Prepared By The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:1 P-511-485(V:1) PM100WX6 Revision History Rev. 1.0 Issued Date Revised January,11,2008 New Contents The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:2 P-511-485(V:1) PM100WX6 TECHNICAL SPECIFICATION CONTENTS NO. ITEM PAGE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Cover Revision History Contents Application Features Mechanical Specifications Mechanical Drawing of TFT-LCD module Input / Output Terminals Absolute Maximum Ratings Electrical Characteristics Pixel Arrangement Display Color and Gray Scale Reference Block Diagram Interface Timing Power On Sequence Optical Characteristics 1 2 3 4 4 4 6 7 10 10 11 12 13 14 19 19 23 24 25 Handling Cautions Reliability Test Packing Diagram The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:3 P-511-485(V:1) PM100WX6 1. Application This data sheet applies to a color TFT LCD module, PM100WX6 PM100WX6 module applies to OA product, which requires high quality flat panel display. If you must use in severe reliability environment, please don’t extend over PVI’s reliability test conditions. If you use PM100WX6, Prime View advises your systems use PVI’s timing controller IC (PVI-2003A) which will generate proper timing signals to control PM100WX6. 2. Features . Wide VGA 800ͪ(R, G, B)ͪ480 dots resolution . Pixel in stripe configuration . Thin and light weight . Display ColorsΚ262,144 colors . Gray scale inversion DirectionΚ6 o’clock . TTL interface 3.Mechanical Specifications Parameter Screen Size Display Format Display Colors Active Area Pixel Pitch Pixel Configuration Outline Dimension Weight Surface treatment Back-light Display mode Gray scale inversion direction Specifications 10 (diagonal) 800ͪ(R, G, B)ͪ480 262,144 216.0(H)ͪ129.6(V) 0.270(H)ͪ0.270(V) Stripe 232.0(W)Ø144.6 (H)Ø6.5 (D) (typ.) 330²10 Anti-glare+EWV CCFL, 1 tube Normally white 6 o’clock [ ref to Note 13-1 ] Unit inch dot mm mm mm g The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:4 P-511-485(V:1) PM100WX6 M001-030-01 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:5 Patrick Lin Frank Shin 1 CN1 30 1 CN2 30 Frank Shin Patrick Lin PM100WX6(FRONT VIEW) 4.Mechanical Drawing of TFT-LCD Module P-511-485(V:1) PM100WX6(BACK VIEW) M001-030-01 Patrick Lin Frank Shin 30 CN2 1 30 CN1 1 Frank Shin 30 DETAIL "A" (S: 2/1,2PLS) 1 Patrick Lin PM100WX6 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:6 P-511-485(V:1) PM100WX6 5.Input / Output Terminals 5-1) TFT-LCD Panel Driving Connector type: IRISO, IMSA-9637S-30A-TC, PIN No 30 pins, pitch=0.5mm CN 1 Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Symbol DIO1 VSS1 VDD1 CLK VSS1 R/L R0 R1 R2 R3 R4 R5 VSS1 G0 G1 G2 G3 G4 G5 VSS1 B0 B1 B2 B3 B4 B5 LD REV POL DIO2 I/O I/O I I I I I I I I I I I I I I I I I I I I I I I I I I I I I/O Function Horizontal Start Pulse Signal Input or Output Ground Power Supply Horizontal Shift Clock Ground Right / Left selection Red Data (LSB) Red Data Red Data Red Data Red Data Red Data (MSB) Ground Green Data (LSB) Green Data Green Data Green Data Green Data Green Data (MSB) Ground Blue Data (LSB) Blue Data Blue Data Blue Data Blue Data Blue Data (MSB) Load output signal Data invert control Polarity selection Horizontal Start Pulse Signal Input or Output Remark Note 5-1 Note 5-1 Note 5-2 Note 5-3 Note 5-4 Note 5-1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:7 P-511-485(V:1) PM100WX6 CN 2 Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Symbol VSS2 V1 V2 V3 V4 V5 V6 V7 VSS2 V8 V9 V10 V11 V12 V13 V14 VSS2 VDD2 VCOM XON OE U/D CKV STVU STVD VGG GND VCC GND VEE I/O I I I I I I I I I I I I I I I I I I I I I I I I/O I/O I I I I I Function Ground Gamma Voltage 1 Gamma Voltage 2 Gamma Voltage 3 Gamma Voltage 4 Gamma Voltage 5 Gamma Voltage 6 Gamma Voltage 7 Ground Gamma Voltage 8 Gamma Voltage 9 Gamma Voltage 10 Gamma Voltage 11 Gamma Voltage 12 Gamma Voltage 13 Gamma Voltage 14 Ground Voltage for analog circuit Common Voltage NC Output Enable Up / Down Selection Vertical Shift Clock Vertical Shift Pulse Signal Input or Output Vertical Shift Pulse Signal Input or Output Gate On Voltage Ground Voltage for logic circuit Ground Gate Off Voltage Remark Note 5-11 Note 5-11 Note 5-11 Note 5-11 Note 5-11 Note 5-11 Note 5-11 Note 5-11 Note 5-11 Note 5-11 Note 5-11 Note 5-11 Note 5-11 Note 5-11 Note 5-11 Note5-10 Note 5-5 Note 5-6 Note 5-7 Note 5-6 Note 5-6 Note 5-8 Note 5-9 Note 5-1: Select left or right shift R/L 1 0 DIO1 Input Hi-Z DIO2 Hi-Z Input Shift Left to right Right to left Note 5-2: Latch the polarity of outputs and switch the new data to outputs At the rising edge (CLK), latch the “POL” signal to control the polarity of the outputs. Note 5-3: Control whether the Data R0~G5 are inverted or not. (PVI suggests connecting to GND) When “REV=1”, these data will be inverted. EX: “00”Ш”3F”, “07”Ш”38”, “15”Ш”2A” Note 5-4: Polarity selector for dot-inversion control. Available at the rising edge of LD. When POL=1: Even outputs range from V1~V7, and Odd outputs range from V8~V14; When POL=0: Even outputs range from V8~V14, and Odd outputs range from V1~V7. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:8 P-511-485(V:1) PM100WX6 Note 5-5: When OE is connected to high “1”, the driver outputs are disabled (Gate output = VEE). Under this condition, the operation of registers will not be affected. Note 5-6: Select up or down shift STVU STVD U/D 1 Hi-Z Input 0 Input Hi-Z Note 5-7: Gate driver shift clock Shift Down to Up Up to Down Note 5-8: Gate on voltage, VGG=17V. Note 5-9: Gate off voltage, VEE=-8V. Note 5-10:This pin is NC or must connect to VDD1 Note 5-11:Typical Application Circuit (When VDD2 = +9.6V) R 15 2 V 1 1 V D D 2 0 O H M R 1 1 2 V 3 2 R 16 2 R 2 1 1 0 OHM O pen V 2 2 .4 K O H M R 3 1 2 V 4 O PEN R 4 1 V 5 2 2 .7 K O H M R 5 1 2 2 R 17 2 R 6 1 V 7 1 0 OHM O PEN V 6 10K O H M R 7 1 2 .2 K R 20 1 2 V 8 O H M 2 3 .9 K O H M 1 2 10K O H M 1 0 OHM R 18 2 V 9 R 8 1 R 9 2 V 10 O PE N 1 V 11 R 10 2 2 .7 K O H M 1 R 11 2 V 12 O PE N 1 1 0 OHM 2 R 19 2 V 13 R 12 2 .4 K O H M 1 R 13 2 V 14 O pen 1 R 14 2 0 O H M The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:9 P-511-485(V:1) PM100WX6 6.Absolute Maximum Ratings: Parameters Supply Voltage for Source Driver Supply Voltage for Gate Driver Digital Input VSS1=VSS2=GND=0V, Ta=25к Symbol VDD1 VDD2 VCC VGG VGG-VEE VEE VIN MIN. -0.3 -0.5 -0.3 -0.3 -20 -0.5 MAX. 5.0 12.0 5.0 40.0 40 0.3 VCC+0.5 Unit V V V V V V V Remark 7.Electrical Characteristics VSS1=VSS2=GND=0V, Ta=25к 7-1) Recommended Operating Conditions: Item Supply Voltage for Source Driver Supply Voltage for Gate Driver Digital Input Voltage Symbol Min. VDD1 3.0 VDD2 9 VGG VEE VCC 3.0 VIH 0.8VDD1 0 VIL Typ. 3.3 9.6 17 -8 3.3 - 7-2) Recommended Driving Condition for Back Light Parameter Symbol Min. Typ. Max. Lamp Voltage VL 720 800 880 Lamp Current IL 4 6 8 Lamp Frequency PL 30 45 80 Starting Voltage (25к) (Reference Value) Starting Voltage (0к) (Reference Value) Starting Voltage (-20к) (Reference Value) Max. Unit 3.6 V 10 V V V 3.6 V VDD1 V 0.2VDD1 V Remark Unit V mA Ta=25к Remark IL=6mA Note 7-1 KHz Note 7-2 Vs - - 1380 Vrms Note 7-3 Vs - - 1510 Vrms Note 7-3 Vs - - 1650 Vrms Note 7-3 Note 7-1: In order to have proper operation of the B/L, no matter what kind of inverters, the output lamp current must be between Min. and Max. values to avoid the abnormal display image caused by B/L. Note 7-2: The waveform of lamp driving voltage should be as close to a perfect sine wave as possible. Note 7-3: The” Max of starting voltage ” means the minimum voltage of inverter to turn on the CCFL. and it should be applied to the lamp for more than 1 second to start up. Otherwise the lamp may not be turned on. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:10 P-511-485(V:1) PM100WX6 7-3) Power Consumption Parameter Supply Current for Gate Driver (Hi level) Supply Current for Gate Driver (Low level) Supply Current for Source Driver (Digital) Supply Current for Source Driver (Analog) Supply Current for Gate Driver (Digital) LCD Panel Power Consumption Back Light Lamp Power Consumption Symbol IGG IEE IDD1 IDD2 ICC Min. VGH=+17V VEE=-8V VDD1=+3.3V VDD2=+9.6V VCC=+3.3V Typ. Max. 0.16 0.48 2.03 6.09 2.19 4.38 27.47 54.94 0.1 0.3 290.2 5.09 - Unit mA mA mA mA mA mW W Remark Note 7-4 Note 7-5 Note 7-4: The power consumption for back light is not included. Note 7-5: Back light lamp power consumption is calculated by ILͪVL. 8. Pixel Arrangement The LCD module pixel arrangement is stripe configuration. R G B R G B R G B 1 st Line RGB R G B R G B 2 nd Line RGB RGB R G B 3 rd Line 1 st Pixel 800 th Pixel 1 Pixel = R G B RGB 478 th Line RGBRGB RGB 479 th Line RGBRGBRGB 480 th Line RGB RGB The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:11 P-511-485(V:1) PM100WX6 9. Display Color and Gray Scale Reference Color Input Color Data Green Red Blue R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0 Basic Colors Red Green Blue Black Red (63) Green (63) Blue (63) Cyan Magenta Yellow White Red (00) Red (01) Red (02) Darker ʆ Brighter Red (61) Red (62) Red (63) Green (00) Green (01) Green (02) Darker ʆ Brighter Green (61) Green (62) Green (63) Blue (00) Blue (01) Blue (02) Darker ʆ Brighter Blue (61) Blue (62) Blue (63) 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:12 P-511-485(V:1) PM100WX6 10. Block Diagram 10-1) TFT-module Block Diagram SYSTEM User connector 30 pin Video Timing Controller ( PVI-2003A ) Control ˩ ˗˗˄ DC - DC Converter Gamma Generator Vcom Generator ˩˚˚ ˩˘˘ ˩˗˗˅ Gamma FPC Source Driver IC 10" WVGA TFT -LCD Panel Vcom Gate Driver IC If you use PM100WX6 , you can apply PVI-2003A( Timing controller) which will generate timing signals to support PM100WX6 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:13 P-511-485(V:1) PM100WX6 11. Interface Timing 11.1) Timing Parameters AC Electrical Characteristics (VCC=VDD1=3.3V, VDD2=9.6V, GND=VSS1=VSS2=0V, Ta=25к) Parameter Symbol Min. Typ. Max. Unit CLK Frequency Fclk - 32 40 MHz CLK Pulse Width Tcw 25 - - ns Data Set-up Time Tsu 4 - - ns Data Hold Time Thd 2 - - ns Propagation Delay of DIO2/1 Tphl 6 10 15 ns Time That The Last Data to LD Tld 1 - - Tcw Pulse width of LD Twld 2 - - Tcw Time That LD to DIO1/2 Tlds 5 - - Tcw POL Set-up Time Tpsu 6 - - ns POL Hold Time Tphd 6 - - ns OE Pulse Width TOEV 1 - - µs CKV Pulse Width TCKV 500 - - ns STV Set-up Time TSUV 400 - - ns STV Hold Time THDV 400 - - ns Horizontal Display Period THDP - 800 - Tcw Horizontal Period Timing Range THP - 1056 - Tcw Horizontal Lines Per Field TV 484 508 620 THP Vertical Display Timing Range TDV - 480 - THP The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:14 P-511-485(V:1) PM100WX6 ˆ˃ʸ ˧̃˻˿ ˙˼̅̆̇ʳ˷˴̇˴ ʻˢ̈̇̃̈̇ʼ ˗˜ˢ˄˂˅ ˥˘˩ ˗˴̇˴ ʻ˜́̃̈̇ʼ ˗˜ˢ˄˂˅ ˖˟˞ ˊ˃ʸ ˧̆̈ ˊ˃ʸ ˧˻˷ ˊ˃ʸ ˊ˃ʸ ˧̆̈ ˊ˃ʸ ˄ ˧˻˷ ˧˶̊ ˊ˃ʸ ˅ ˦˸˶̂́˷ʳ˷˴̇˴ ˙˼˺ˁʳ˄˄ˀ˄ʳ˛˴̅˼̍̂́̇˴˿ʳ˧˼̀˼́˺ʻ˄ʼ ˊ˃ʸ ˧̃˻˿ ˊˌˌ ˊ˃ʸ ˊ˃ʸ ˟˴̆̇ʳʳʳʳʳ˷˴̇˴ ˋ˃˃ 11.2) Timing Diagram The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:15 P-511-485(V:1) ˡ˸˺˴̇˼̉˸ ˛˼˺˻ˀ̍ ˛˼˺˻ˀ̍ ˊ˃ʸ ˧̃˻˷ ˊ˃ʸ ˧̃̆̈ ˊ˃ʸ ˊ˃ʸ ˛˼˺˻ˀ̍ ˘̉˸́ ̂̈̇̃̈̇̆ ˢ˷˷ ̂̈̇̃̈̇̆ ˧̃̆̈ ˧̃˻˷ ˊ˃ʸ ˣˢ˟ ˟˗ ˗˜ˢʳ˄˂˅ ʻ˜́̃̈̇ʼ ˟˗ ˖˟˞ ˊ˃ʸ ˊ˃ʸ ˟˴̆̇ ˧˿˷ ˆ˃ʸ ˊ˃ʸ ˧˿˷̆ ˧̊˿˷ ˙˼˺ˁʳ˄˄ˀ˅ʳ˛̂̅˼̍̂́̇˴˿ʳ̇˼̀˼́˺ʻ˅ʼ ˊ˃ʸ ˆ˃ʸ ˊ˃ʸ ˧̃̆̈ ˧̃˻˷ ˆ˃ʸ ˣ̂̆˼̇˼̉˸ PM100WX6 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:16 P-511-485(V:1) ˙˼˺ˁʳ˄˄ˀˆʳ˩˸̅̇˼˶˴˿ʳ̆˻˼˹̇ʳ˶˿̂˶˾ʳ̇˼̀˼́˺ ˢ˘ ˧˦˨˩ ˖˞˩ ˦˧˩˨˂˦˧˩˗ ˈ˃ʸ ˧ˢ˘˩ ˧˛˗˩ ˧˖˞˩ʳ ˈ˃ʸ PM100WX6 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:17 P-511-485(V:1) ˙˼˺ˁʳ˄˄ˀˇʳ˩˸̅̇˼˶˴˿ʳ̇˼̀˼́˺ ˣˢ˟ʻ˘̉˸́ʳ˙˼˸˿˷ʼ ˣˢ˟ʻˢ˷˷ʳ˙˼˸˿˷ʼ ˦˧˩˨˂˦˧˩˗ ʻ˩˦ˬʼ ʻ˛˦ˬʼ ˧˛ˣ ˧˛˗ˣ PM100WX6 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:18 P-511-485(V:1) PM100WX6 12. Power On Sequence ˩˚˚ ˩˗˗˅ ˩˗˗˄ ʿ˩˖˖ ˩˦˦ʻ˃˩ʼ ˩˘˘ OFF OFF Back Light ON OFF OFF ON T1 T3 ˟̂˺˼˶ʳ̆˼˺́˴˿ ˥˚˕ˀ ˩˼˷˸̂ʳ̆˼˺́˴˿ T2 T4 1. 10msЉT1ІT2 2. 0msІT3ЉT4Љ10ms 13. Optical Characteristics 13-1) Specification: Parameter Horizontal Viewing Angle Vertical Contrast Ratio Brightness Luminance Uniformity White Chromaticity Response time Rise Fall Cross Talk Lamp Life Time Symbol Ӱ21.22 Ӱ11 Ӱ12 CR Condition CRЇ10 At optimized viewing angle Ӱ=0°/ӽ=0 U x y Tr Tf - Ӱ=0̓ Ӱ=0̓ +25к MIN. 65 55 45 200 350 70 0.28 0.31 - TYP. MAX. 70 60 50 - 500 - 400 80 0.31 0.34 0.34 0.37 15 30 25 50 3.5 30000 --- Ta=25к Unit Remarks deg deg Note 13-1 deg - Note 13-2 cd/ф % ms ms % hrs Note 13-4 Note 13-5 Note 13-3 Note 13-6 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:19 P-511-485(V:1) PM100WX6 Note 13-1: The definitions of viewing angles are as follow Note 13-2: The definition of contrast ratio ˖˥ = ˟̈̀˼́˴́˶˸ʳ˴̇ʳ˺̅˴̌ʳ˿˸̉˸˿ʳˉˆ ˟̈̀˼́˴́˶˸ʳ˴̇ʳ˺̅˴̌ʳ˿˸̉˸˿ʳ˃ Note 13-3: Definition of Response Time Tr and Tf: W h ite B la c k W h ite 100% 90% Brightness 10% 0% Tr Tf Note 13-4: Topcon BM-5A or BM-7 fast luminance meter 1̓field of view is used in the testing (after 30 minutes’ operation). The typical luminance value is measured at lamp current 6.0 mA. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:20 P-511-485(V:1) PM100WX6 Photometer (TOPCON BM-5A or BM-7 fast) 500 mm +/- 50 mm Field = 1° TFT-LCD module DC/AC Inverter Optical characteristics measuring configuration Note 13-5: The uniformity of LCD is defined as U= The Minimum Brightness of the 9 testing Points The Maximum Brightness of the 9 testing Points Luminance meter: BM-5A or BM-7 fast (TOPCON) Measurement distance: 500 mm +/- 50 mm Ambient illumination: < 1 Lux Measuring direction: Perpendicular to the surface of module The test pattern is white (Gray Level 63). 25% 50% 75% 25% 50% 75% The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:21 P-511-485(V:1) PM100WX6 Note 13-6: Cross Talk (CTK) = ⏐YA-YB⏐ YA ͪ100% YA: Brightness of Pattern A YB: Brightness of Pattern B Luminance meter: BM-5A or BM-7 fast (TOPCON) Measurement distance: 500 mm +/- 50 mm Ambient illumination: < 1 Lux Measuring direction: Perpendicular to the surface of module Pattern A Pattern B (Gray Level 31) (Gray Level 31, except the black box in the center ) YA YB 1/3 1/3 1/3 1/3 1/3 1/3 Black : Measuring Point (A and B are at the same point.) (Gray Level 0) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:22 P-511-485(V:1) PM100WX6 14. Handling Cautions 14-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Please connect the ground pattern of the inverter circuit surely. If the connection is not perfect, some following problems may happen possibly. 1. The noise from the backlight unit will increase. 2. The output from inverter circuit will be unstable. 3. In some cases a part of module will heat. c)Polarizer which is made of soft material and susceptible to flaw must be handled carefully. d) Protective film (Laminator) is applied on surface to protect it against scratches and dirts. It is recommended to peel off the laminator before use and taking care of static electricity. 14-2) Precautions in mounting a) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. b) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. c) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 14-3) Adjusting module a) Adjusting volumes on the rear face of the module have been set optimally before shipment. b) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 14-4) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. f) Please adjust the voltage of common electrode as material of attachment by 1 module. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:23 P-511-485(V:1) PM100WX6 15. Reliability Test No Test Item Test Condition 1 High Temperature Storage Test Ta = +80к, 240 hrs 2 Low Temperature Storage Test Ta = -30к, 240 hrs 3 High Temperature Operation Test Ta = +80к, 240 hrs 4 Low Temperature Operation Test Ta = -20к, 240 hrs 5 6 7 8 9 Remark High Temperature & High Humidity Ta = +60к, 90%RH, 240 hrs Operation Test (No Condensation) Thermal Cycling Test 0к+60к, 50 Cycles (non-operating) Vibration Test 1Hr 1Hr FrequencyΚ10 ~ 57 HZ , AmplitudeΚ0.5 mm 58~500Hz, 1G Sweep time: 11 min (non-operating) Test Period: 3 hrs (1 hr for each direction of X, Shock Test Y, Z) 80G, 6ms, X,Y, Z Electrostatic Discharge Test 1 times for each direction 200pF, 0Ө ̈́200V (non-operating) 1 time / each terminal (non-operating) Ta: ambient temperature [Criteria] 1. In the standard conditions, there is not display function NG issue occurred. (including :line defect ,no image) All the cosmetic specification is judged before the reliability stress The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:24 P-511-485(V:1) PM100WX6 16. Packing Diagram The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:25