INTEGRATED CIRCUITS PDIUSBP11 Universal Serial Bus transceiver Product specification 1997 Sep 16 Philips Semiconductors Preliminary specification Universal Serial Bus transceiver PDIUSBP11 FEATURES DESCRIPTION • Utilizes digital inputs and outputs to transmit and receive USB The PDIUSBP11 is a one chip generic USB transceiver. It is designed to allow 5.0V or 3.3V programmable and standard logic to interface with the physical layer of the Universal Serial Bus. It is capable of transmitting and receiving serial data at both full speed (12Mbit/s) and low speed (1.5Mbit/s) data rates. The outputs from the serial interface engine (inputs VPO and VMO on the PDIUSBP11) are driven by the host. The gated inputs (outputs VP and VM on the PDIUSBP11) are to be decoded by the host. cable data • Supports 12Mbit/s “Full Speed” and 1.5Mbit/s “Low Speed” serial data transmission • Compatible with the VHDL “Serial Interface Engine” from USB developer’s conference • Available in SO, 14 pin package • Hysteresis on D+, D–, VMO inputs Implementation of the Serial Interface Engine along with the USB transceiver allow the designer to make flexible USB compatible devices with widely available logic components. ORDERING INFORMATION TEMPERATURE RANGE OUTSIDE NORTH AMERICA NORTH AMERICA PKG. DWG. # 14-pin plastic SO PACKAGES 0°C to +70°C PDIUSBP11 D PDIUSBP11 D SOT108-1 14-pin plastic SSOP 0°C to +70°C PDIUSBP11 DB PDIUSBP11 DB SOT337-1 14-pin plastic TSSOP 0°C to +70°C PDIUSBP11 PW PDUSBP11 PW DH SOT402-1 PIN CONFIGURATION PIN DESCRIPTION NC 1 14 VCC OE# 2 13 VMO RCV 3 12 VPO VP 4 11 D VM 5 10 D– SUSPND 6 9 SPEED GND 7 8 NC PIN No. PIN SYMBOL I/O NAME AND FUNCTION 3 RCV O Receive data. CMOS level output for USB differential input 2 OE# I Output Enable. Active LOW, enables the transceiver to transmit data on the bus. When not active the transceiver is in receive mode Inputs to differential driver. (Outputs from SIE). 12,, 13 SV00142 VPO, VMO I FUNCTIONAL DIAGRAM RCV D+ 4, 5 + VP, VM O – VP 0 RESULT SE0 0 1 Logic “0” 1 0 Logic “1” 1 1 Undefined SV00143 2 VP VM RESULT 0 0 SE0 0 1 Low Speed 1 0 Full Speed 1 1 Error Data+, Data–. Differential data bus conforming to the Universal Serial Bus standard. 11, 10 D+, D– I/O 6 SUSPND I Suspend. Enables a low power state while the USB bus is inactive. While the suspnd pin is active it will drive the RCV pin to a logic “0” state. 9 SPEED I Edge rate control. Logic “1” operates at edge rates for “full speed”. Logic “0” operates edge rates for “low speed”. VM 1997 Sep 16 VMO 0 Gated version of D– and D+. Outputs are logic “0” and logic “1”. Used to detect single ended zero (SE0#), error conditions, and interconnect speed. (Inputs to SIE). D– OE# SPEED VMO VPO VPO 14 VCC 3.0V to 3.6V power supply 7 GND Ground reference 853-1836 18389 Philips Semiconductors Preliminary specification Universal Serial Bus transceiver PDIUSBP11 RECOMMENDED OPERATING CONDITIONS LIMITS SYMBOL VCC PARAMETER CONDITIONS DC supply voltage UNIT MIN MIN. MAX MAX. 3.0 3.6 V VI DC Input voltage range 0 5.5 V VI/O DC input range for I/O’s 0 VCC V VO DC output voltage range 0 VCC V 0 +70 °C Tamb Operating ambient temperature range in free air See DC and AC characteristics for individual device ABSOLUTE MAXIMUM RATINGS1, 2 In accordance with the Absolute Maximum Rating System (IEC 134) Voltages are referenced to GND (ground = 0V) LIMITS SYMBOL VCC PARAMETER CONDITIONS DC supply voltage UNIT MIN MAX –0.5 +6.5 V IIK DC input diode current VI < 0 – –50 mA VI DC input voltage Note 3 –0.5 +5.5 V –0.5 VCC +0.5 V VO > VCC or VO < 0 – "50 mA Note 3 –0.5 VCC +0.5 V VI/O DC input voltage range for I/O’s IOK DC output diode current VO DC output voltage IO DC output source or sink current for VP/VM, RCV pins VO = 0 to VCC – "15 mA IO DC output source or sink current for D+/D– pins VO = 0 to VCC – "50 mA – "100 mA –60 +150 °C IGND, ICC DC VCC or GND current Tstg Storage temperature range Ptot Power dissipation per package mW NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150°C. 3. The input and output voltage ratings may be exceeded if the input and output clamp current ratings are observed. 1997 Sep 16 3 Philips Semiconductors Preliminary specification Universal Serial Bus transceiver PDIUSBP11 DC ELECTRICAL CHARACTERISTICS Over recommended operating conditions Voltages are referenced to GND (ground = 0V) LIMITS SYMBOL PARAMETER TEST CONDITIONS Temp = 0°C to +70°C TYP1 MIN VIH HIGH level input VCC = 3.0V to 3.6V3 VIL LOW level input VCC = 3.0V to 3.6V3 RD H Output impedance (HIGH state) Note 2 28 RD L Output impedance (LOW state) Note 2 28 VCC = 3.0V; IO = 6mA 2.2 2.7 VCC = 3.0V; IO = 4mA 2.4 VCC = 3.0V; IO = 100µA 2.8 VOH HIGH level output3 UNIT MAX 2.0 V 0.8 V 34 43 Ω 35 51 Ω V – VCC = 3.0V; IO = 6mA 0.3 0.8 VOL LOW level output3 – 0.2 ICCQ Quiescent supply current VCC = 3.6V; VI = VCC or GND; IO = 0 330 600 ICCS Supply current in Suspend VCC = 3.6V; VI = VCC or GND; IO = 0 – 65 µA ICCFS Active supply current (Full Speed) VCC = 3.3V 10 30 mA ICCLS Active supply current (Low Speed) VCC = 3.3V 2 25 mA "0.1 "5 µA "10 µA VCC = 3.0V; IO = 4mA 0.5 VCC = 3.0V; IO = 100µA II Input leakage current VCC = 3.6V; VI = 5.5V or GND; not for I/O pins 2 IOZ 3-State output OFF-state current VI = VIH or VIL; VO = VCC or GND NOTES: 1. All typical values are at VCC = 3.3V and Tamb = 25°C. 2. This value includes an external resistor of 24Ω "1%. See “Load D+ and D–” diagram for testing details. 3. All signals except D+ and D–. V µA AC CHARACTERISTICS GND = 0V, tR = tF = 3.0ns, CL = 50pF, RL = 500Ω, VCC = 3.3V LIMITS SYMBOL PARAMETER TEST CONDITIONS WAVEFORMS Tamb = 25°C MIN tpLH tpHL trise tfall tpLH tpHL trise tfall tpLH tpHL tpLH tpHL VMO/VPO to D+/D– Full Speed 1 Rise and Fall Times Full Speed 2 VMO/VPO to D+/D– Low Speed 1 Rise and Fall Times Low Speed 2 D+/D to RCV D+/D– 3 D+/D to VP/VM D+/D– 1 tpZH tpLZ OE# to D+/D– RL = 500Ω 4 MIN MAX 0 12 0 15 0 12 0 15 4 20 4 20 4 20 4 20 30 300 30 300 30 300 30 300 75 300 75 300 75 200 75 200 Setup for SPEED 5 tpZL tsu Tamb = 0°C to +70°C MAX tpHZ 0 TYP 16 16 16 20 8 8 8 12 12 12 12 15 10 10 10 15 UNIT ns ns ns ns ns ns ns ns Vcr Crossover point Note 1 3 1.3 2.0 1.3 2.0 V NOTE: 1. The crossover point is in the range of 1.3V to 2.5V for the low speed mode with a 50pF capacitance. In the low-speed mode with a 100pF or greater capacitance, the crossover point is in the range of 1.3V to 2.0V. 1997 Sep 16 4 Philips Semiconductors Preliminary specification Universal Serial Bus transceiver PDIUSBP11 AC WAVEFORMS VM = 1.5V VX = VOL +0.3V VY = VOH –0.3V VOL and VOH are the typical output voltage drops that occur with the output load. (VCC never goes below 3.0V). 2.7V 2.7V VM INPUT 1.5V 1.5V GND GND tPLH SPEED tPHL VOH tsu tsu 2.7V OUTPUT 50% 50% VM VCR VM GND VOL SV00144 SV00147 Waveform 1. D+/D– to VP/VM or VPO/VMO to D+/D– Waveform 5. Setup for Speed Test Point tRISE tFALL D.U.T. VOH 90% VOL 90% 10% 25pF 10% SV00149 SV00186 Load for VM/VP and RCV Waveform 2. Rise and Fall Times 2.0V D+ VCR Test Point VCR 24Ω D– 1.0V tPLH 500Ω D.U.T. tPHL V VOH + – 50pF VCR VM V = 0 for tPZH, tPHZ V = VCC for tPZL, tPLZ VOL SV00150 SV00146 Load for Enable and Disable Times Waveform 3. D+/D– to RCV Test Point 2.7V VCC S1 24Ω 1.5V 1.5V 1.5kΩ* D.U.T. 0V OE# VOH VY 0.5VCC VOL 15kΩ tPHZ tPLZ tPZH tPZL VM CL = 50pF, Full Speed CL = 50pF, Low Speed (Min Timing) CL = 350pF, Low Speed (Max Timing) 0.5VCC VX D+/D– Test S1 D–/LS D+/LS D–/FS D+/FS close open open close * 1.5KΩ on D– (Low Speed) or D+ (Full Speed) Only SV00151 SV00187 Load for D+/D– Waveform 4. OE# to D+/D– 1997 Sep 16 CL 5 Philips Semiconductors Product specification Universal Serial Bus transceiver PDIUSBP11 SO14: plastic small outline package; 14 leads; body width 3.9 mm 1997 Sep 16 6 SOT108-1 Philips Semiconductors Product specification Universal Serial Bus transceiver PDIUSBP11 SSOP14: plastic shrink small outline package; 14 leads; body width 5.3 mm 1997 Sep 16 7 SOT337-1 Philips Semiconductors Product specification Universal Serial Bus transceiver PDIUSBP11 TSSOP14: plastic thin shrink small outline package; 14 leads; body width 4.4 mm 1997 Sep 16 8 SOT402-1 Philips Semiconductors Product specification Universal Serial Bus transceiver PDIUSBP11 NOTES 1997 Sep 16 9 Philips Semiconductors Product specification Universal Serial Bus transceiver PDIUSBP11 DEFINITIONS Data Sheet Identification Product Status Definition Objective Specification Formative or in Design This data sheet contains the design target or goal specifications for product development. Specifications may change in any manner without notice. Preliminary Specification Preproduction Product This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Product Specification Full Production This data sheet contains Final Specifications. Philips Semiconductors reserves the right to make changes at any time without notice, in order to improve design and supply the best possible product. Philips Semiconductors and Philips Electronics North America Corporation reserve the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. LIFE SUPPORT APPLICATIONS Philips Semiconductors and Philips Electronics North America Corporation Products are not designed for use in life support appliances, devices, or systems where malfunction of a Philips Semiconductors and Philips Electronics North America Corporation Product can reasonably be expected to result in a personal injury. Philips Semiconductors and Philips Electronics North America Corporation customers using or selling Philips Semiconductors and Philips Electronics North America Corporation Products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors and Philips Electronics North America Corporation for any damages resulting from such improper use or sale. Philips Semiconductors 811 East Arques Avenue P.O. Box 3409 Sunnyvale, California 94088–3409 Telephone 800-234-7381 Philips Semiconductors and Philips Electronics North America Corporation register eligible circuits under the Semiconductor Chip Protection Act. Copyright Philips Electronics North America Corporation 1997 All rights reserved. Printed in U.S.A.