DC-AC INVERTER UNIT PS-DA0129-176-E-B(S) (5 W SINGLE OUTPUT) (PRELIMINARY INFORMATION) DESCRIPTION : This DC to AC Inverter was developed for notebook computer and many other low LCD Backlight power supply as low profile applications, either for Notebook PC or Industrial. Optimized for LQ057V3DG01, 29. Mai 2007 APPLICABLE LCD: 5 to 15 inches single lamp type Lamp Voltage 690 Vrms Lamp Current 5.0 mArms Lamp Start Up Voltage 1.800 Vrms (Vin : 12 Vdc) FEATURES : Current Feedback Circuit High Efficiency Low noise with voltage resonant circuit Regulated output current High Input voltage range RoHS compliant (S) TEMPERATURE & HUMIDITY : Operating Temperature Range Storage Temperature Range Humidity DIMENSIONS : LxWxH -30°C ~ +80°C -30°C ~ +85°C 95 %RH max 95.5 x 20 x 9.5 mm Unit : mm Weight :20(g) typ. Note: Please use plastic screw in case of a non-insulating mounting base! Components No. 1 2 3 Part Description PCB Connector CN1 Connector CN2 Qty. 1 1 1 Material UL94V-0 (FR-4 or CEM-3) 53261-0590 SM02(8.0)B-BHS-1-TB Note t=1m m Molex or equal JST or equal Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (1) Version 1.1, 17th August 2007 DC-AC INVERTER UNIT PS-DA0129-176-E-B(S) (5 W SINGLE OUTPUT) (PRELIMINARY INFORMATION) Input side CN1: Pin No. CN 1-1 CN 1-2 CN 1-3 CN 1-4 CN 1-5 Symbols Ratings Vin 9.6 ~ 15.0 Vdc GND Vrmt 0 ~ 0.5 = OFF / 2.5 ~ Vin = ON Vbr 0 ~ 3.0 Vdc N.C. - Output side CN2: Pin No. Symbols Vlow2 CN 2-1 N.C. CN 2-2 Vhigh2 CN 2-3 Ratings (2V) 650 Vrm s (5 m Arm s ) ELECTRICAL CHARACTERISTICS : Conditions Parameters Symbols Output Current Output Current Input Current Frequency Open Circuit Voltage No load Shutdown Iout Iout Iin F Vopen Ts d Note 1 : Vin (V) Vbr (V) 9.6~15 9.6~15 12 9.6~15 9.6~15 9.6~15 0.0 3.0 0.0 0.0 0.0 0.0 Specification Tu (°C) -30 -30 -30 -30 -30 -30 ~ +80 ~ +80 ~ +80 ~ +80 ~ +80 ~ +80 Min. Typ. Max. 4.5 1.5 42.5 1.700 - 5.0 2.0 0.42 50 1.800 1.0 5.5 2.5 0.68 57.5 2.000 - Unit Note m Arm s m Arm s Adc kHz Vrm s s ec wit hout load Please keep minimum of 2mm clearance (all directions) between inverter high voltage area as marked on mechanical drawing and any conductors. TEST CIRCUIT : Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (2) Version 1.1, 17th August 2007